Analysis of unsteady flow over Offshore Wind Turbine in combination with different types of foundations

Environmental effects have an important influence on Offshore Wind Turbine (OWT) power generation efficiency and the structural stability of such turbines. In this study, we use an in-house Boundary Element (BEM)—panMARE code—to simulate the unsteady flow behavior of a full OWT with various combinations of aerodynamic and hydrodynamic loads in the time domain. This code is implemented to simulate potential flows for different applications and is based on a three-dimensional first-order panel method. Three different OWT configurations consisting of a generic 5 MW NREL rotor with three different types of foundations (Monopile, Tripod, and Jacket) are investigated. These three configurations are analyzed using the RANSE solver which is carried out using ANSYS CFX for validating the corresponding results. The simulations are performed under the same environmental atmospheric wind shear and rotor angular velocity, and the wave properties are wave height of 4 m and wave period of 7.16 s. In the present work, wave environmental effects were investigated firstly for the two solvers, and good agreement is achieved. Moreover, pressure distribution in each OWT case is presented, including detailed information about local flow fields. The time history of the forces at inflow direction and its moments around the mudline at each OWT part are presented in a dimensionless form with respect to the mean value of the last three loads and the moment amplitudes obtained from the BEM code, where the contribution of rotor force is lower in the tripod case and higher in the jacket case and the calculated hydrodynamic load that effect on jacket foundation type is lower than other two cases.     

Users’ perceptions and willingness to pay in interurban toll roads: identifying differences across regions from a nationwide survey in Spain

Users’ acceptability is considered one of the key drivers for the successful implementation of transport policy measures. This is especially crucial in the case of toll roads since they are financed through drivers’ contributions. Previous literature in this field has mainly focused on measuring users’ attitudes towards urban congestion pricing strategies. However limited research has been developed concerning interurban toll roads. Previous research shows that socioeconomic variables are not conclusive to explain users’ perceptions towards tolls. By contrast, other drivers such as regional differences seem to play a more important role, especially when charging conditions within the same nation greatly vary across regions. This paper analyzes regional differences in users’ attitudes within an asymmetrical distribution of the toll road network across regions. Based on a nationwide survey conducted to road users in interurban toll roads in Spain, we develop both a binomial logit and a censored regression (tobit) model to explore drivers’ perceptions and willingness to pay. The research concludes that users from regions with a more extensive tolled network generally show a more negative attitude towards charges, but not necessarily a lower willingness to pay. The paper also points out that an asymmetrical distribution of toll roads across regions may result in negative perceptions among those users perceiving to be unfairly treated when compared to citizens in other regions.     

An activity-based approach of investigating travel behaviour of older people

The paper presents the results of an investigation on daily activity-travel scheduling behaviour of older people by using an advanced econometric model and a household travel survey, collected in the National Capital Region (NCR) of Canada in 2011. The activity-travel scheduling model considers a dynamic time–space constrained scheduling process. The key contribution of the paper is to reveal daily activity-travel scheduling behaviour through a comprehensive econometric framework. The resulting empirical model reveals many behavioural details. These include the role that income plays in moderating out-of-home time expenditure choices of older people. Older people in the highest and lowest income categories tend to have lower variations in time expenditure choices than those in middle-income categories. Overall, the time expenditure choices become more stable with increasing age, indicating that longer activity durations and lower activity frequency become more prevalent with increasing age. Daily activity type and location choices reveal a clear random utility-maximizing rational behaviour of older people. It is clear that increasing spatial accessibility to various activity locations is a crucial factor in defining daily out-of-home activity participation of older people. It is also clear that the diversity of out-of-home activity type choices reduces with increasing age and older people are more sensitive to auto travel time than to transit or non-motorized travel time.     

Bicycle mode share in China: a city-level analysis of long term trends

In the past 15 years, cities in China have experienced big changes in socioeconomic and traffic conditions, resulting in a long term change in bicycle use. This study aims to quantify the changes in bicycle mode share in Chinese cities and explore the potential causes. Based on data from 51 cities, it is found that bicycle mode share at the city level decreased gradually in the past. Conventional bicycle mode share decreased with a rate of 3 % per year, but electric bicycle mode share increased with a rate of 2 % per year. The correlations between city features such as demographics and built environments and bicycle mode share at different city sizes are compared. The generalized linear models are estimated to relate the changes in the share of different trip modes to various city-level factors. The results show that the bicycle mode share in a city is impacted by factors including city area size, population density, number of cars, percentage of local road mileage among all roads, and trip purpose. Possible reasons for the changes in bicycle uses in Chinese cities are explored and policy implications are discussed.     

Cost and time damping: evidence from aggregate rail direct demand models

There is a significant body of evidence from both disaggregate choice modelling literature and practical travel demand forecasting that the responsiveness to cost and possibly to time diminishes with journey length. This has, in Britain at least, been termed ‘Cost Damping’, and is recognised in guidance issued by the UK Department for Transport. However, the consistency of the effect across modes and data types has not been established. Cost damping, if it exists, affects both the forecasting of demand and our understanding of behaviour. This paper aims to investigate the evidence for cost and time damping in rail demand using aggregate rail ticket sales data. The rail ticket sales data in Britain has, for many years, formed the basis of analysis of a wide range of impacts of rail demand. It records the number of tickets sold between station pairs, and it is generally felt to provide a reasonably accurate reflection of travel demand. However, the consistency of these direct demand models with choice modelling and highway demand model structures has not been investigated. Rail direct demand models estimated by ticket sales data indicate only slight variation in the fare elasticity with distance, as is evidenced in the largest meta-analysis of price elasticities conducted to date (Wardman in J Transp Econ Policy 48(3):367–384, 2014). This study of UK elasticities shows strong variation between urban and inter-urban trips, presumably a segmentation at least in part by purpose, but less remaining variation by trip length. A lack of variation by length supports the hypothesis of cost damping, because constant cost sensitivity would imply that fare elasticity would increase strongly with distance, because of the increasing impact of higher fares at longer distances. In this paper we indicate that rail direct demand models have some consistency of behavioural paradigm with utility based choice models used in highway planning. We go on to use rail demand data to estimate time and fare elasticities in the context of various cost damping functions. Our empirical contribution is to estimate time elasticities on a basis directly comparable with cost elasticities and to show that the phenomenon of cost damping is strongly present in ticket sales data. This finding implies that cost damping should be included in models intended for multimodal analysis, which may otherwise give incorrect predictions.     

基于最大熵谱估计的舰船静电场实时检测方法

舰船静电场是海水中舰船产生的物理场之一,是很难被隐身的目标特征信号.以往对静电场的检测方法都是基于信号的时域特征,低信噪比情况下,检测效果差.通过对舰船静电场的频域特征分析发现,其能量主要集中在低频段,利用这个特点,提出了一种基于最大熵谱估计(MESE)的舰船静电场实时检测的方法.首先对舰船静电场信号进行最大熵谱估计,然后提取低频段功率谱值作为特征量,通过设定的浮动阈值进行分段功率谱滑动检测,用实船数据对该方法进行了验证,取得了较好的效果.     

无线传感器网络安全路由协议SNEP的分析与仿真实现

以提供可靠保密通信为目标的安全路由协议的分析是无线传感器网络安全基本研究领域之一．阐述了针对无线传感器网络的攻击手段所采取的措施,研究了安全路由协议,重点研究了其中的传感网络加密协议（Sensor Network Encryption Protocol,SNEP）,并进行了仿真实现,最后针对无线传感网络的攻击方式对SNEP的安全性进行了分析．结果证明SNEP协议具有数据机密性、数据认证、防御重放攻击等安全服务．     

The structure of dissipation in the western Irish Sea front

We report on an intensive campaign in the summer of 2006 to observe turbulent energy dissipation in the vicinity of a tidal mixing front which separates well mixed and seasonally stratified regimes in the western Irish Sea. The rate of turbulent dissipation ε was observed on a section across the front by a combination of vertical profiles with the FLY dissipation profiler and horizontal profiles by shear sensors mounted on an AUV (Autosub). Mean flow conditions and stratification were obtained from a bed mounted ADCP and a vertical chain of thermistors on a mooring. During an Autosub mission of 60 h, the vehicle, moving at a speed of ~ 1.2 m s^− 1, completed 10 useable frontal crossings between end points which were allowed to move with the mean flow. The results were combined with parallel measurements of the vertical profile of ε which were made using FLY for periods of up to 13 h at positions along the Autosub track. The two data sets, which show a satisfactory degree of consistency, were combined to elucidate the space–time variation of dissipation in the frontal zone. Using harmonic analysis, the spatial structure of dissipation was separated from the strong time dependent signal at the M₄ tidal frequency to yield a picture of the cross-frontal distribution of energy dissipation. A complementary picture of the frontal velocity field was obtained from a moored ADCP and estimates of the mean velocity derived from the thermal wind using the observed density distribution. which indicated the presence of a strong (0.2 m s^− 1) jet-like flow in the high gradient region of the front. Under neap tidal conditions, mean dissipation varied across the section by 3 orders of magnitude exceeding 10^− 2 W m^− 3 near the seabed in the mixed regime and decreasing to 10^− 5 W m^− 3. in the strongly stratified interior regime. The spatial pattern of dissipation is consistent in general form with the predictions of models of tidal mixing and does not reflect any strong influence by the frontal jet.     

The importance of oceanographic fronts to marine birds and mammals of the southern oceans

During the last 30 years, at-sea studies of seabirds and marine mammals in the oceans south of the Subtropical Front have described an association with major frontal areas. More recently, the advancement in microtechnology has allowed the tracking of individuals and investigations into how these marine predators actually use the frontal zones. In this review, we examine 1) the relative importance to apex predators of the different frontal zones in terms of spatial distribution and carbon flux; 2) the processes that determine their preferential use; and 3) how the mesoscale dynamics of frontal structures drive at-sea foraging strategies of these predators. We review published results from southern waters and place them in a broader context with respect to what has been learned about the importance of fronts in oceans farther north.Some fronts constitute important boundaries for seabird communities in southern waters. At a mesoscale the maximum values of seabird diversity and abundance correspond to the location of the main fronts. At-sea surveys show a strong curvilinear correlation between seabird abundance and sea surface temperatures. High mean species richness and diversity for whales and seabirds are consistently associated with the southern water mass boundary of the Antarctic Circumpolar Current, the Subtropical Front and the Subantarctic Front; in the case of the Polar Front mean seabird densities are more variable. At small-scales, variation in seabird occurrence has been directly related to the processes at fronts in a limited number of cases. A significant positive relation was found between some plankton feeding species and frontal temperature gradient–phytoplankton variables.Telemetric studies have revealed that several apex predators (penguins, albatrosses, seals) perform long, directed foraging trips either to the Subtropical front or Polar Front, depending on locality. Seabirds with low flight costs, such as albatrosses, are able to reach fronts at long distances from colonies, showing variable foraging strategies as a function of the distances involved. Diving birds such as King penguins, that travel at a higher cost and lower speed, rely on the predictable spatial distribution of mesopelagic fish found close to the Polar Front. They may use the currents associated with eddies as oceanographic cues in the active search for frontal zones. Once in these areas they dive preferentially in and below the depth of the thermocline where catches per unit effort are high. Elephant seals concentrate foraging activity principally inside or at the boundary of cyclonic eddies. These mesoscale features appear to offer exceptional productivity favourable for foraging by various diving top predators.The connection between biophysical parameters at fronts and predators is likely to be made through biological enhancement. Top predators appear to forage at locations where prey are advected by physical processes and others where prey are produced locally. Long-term research on at-sea distributions and demographic parameters of top predators are essential to assess the consequences of potential shift in front distributions in relation to global warming. Such environmental changes would add to the impact of fish extraction by the industrial fisheries on the southern food webs.     

Influence of the slice position on chloride migration tests for concrete in marine conditions

Chloride migration tests are used to measure the concrete capacity to inhibit chloride attack. Many researchers carry out this test in a slice of concrete extracted from the central part of cylindrical specimens, discarding about 75% of the concrete used to mold the specimens. This fact generated the question: would it be possible to extract more slices from a same specimen without losing the confidence in the results? The main purpose of this work is to answer this question. Moreover, another aim of this study was to show the difference of chloride penetration between finished faces and the formwork surfaces of concrete beams and slabs. The results indicated that it is possible to use more slices of a single specimen for a chloride migration test. Moreover, it was demonstrated that there is a significant difference of chloride penetration between the finished surface and the formwork surface of the specimens.