Reliability assessment of maintained ship hulls with correlated corroded elements

This paper reviews the factors that affect the corrosion rate of the ship hull girder. It is shown that corrosion rates vary as a function of the location of the element in the structure, of the ocean area and type of ballast tank and steel. However, the corrosion rate in elements that are subjected to similar conditions is highly correlated.

A time-variant formulation is proposed including the correlation between the corrosion rates in neighbouring elements in modelling the degrading effect that corrosion has on the reliability of ship hulls. The effect of corrosion is represented as a time-dependent decrease of plate thickness that affects the midship section modulus. One repair policy was considered and the example results show the effect of plate replacement when its thickness reaches 75% of the original value. The results also illustrate how the limit value of the thickness in the repair criteria influences the reliability and the decision about repair actions. This is also shown for the effect of different corrosion rates, inspection intervals, and allowable stresses.     

Acceleration noise and level of service of urban roads - A case study

Capacity measurement of roads under mixed traffic conditions as prevailing in India is ambiguous as it varies with time, composition of traffic and roadway encroachments. High incidence of slow moving vehicles and tricycles adds to the problem. Volume - capacity ratio appears to be an inadequate measure of defining level of service under mixed traffic situations. An attempt is made in this paper to explore the possibility of presenting unconventional parameters like standard deviation of speed, co-efficient of variation of speed and acceleration noise as possible measures of level of service. Tentative ranges of acceleration noise are proposed in association with flow and speed to explain level of service of urban roads catering to mixed traffic. The results are based on a study conducted in Madras, a major metropolitan city of India.     

Subsidy and public transit performance: A factor analytic approach

The need to measure and evaluate transit system performance has led to the development of numerous performance indicators. However, depending upon the indicator, we oftentimes reach different conclusions regarding transit system performance. The research reported in this paper uses factor analytic methods to generate a set of underlying attributes (factors) that capture the performance of public transit systems in Indiana. Similar to what is reported in the literature, this study finds three attributes that best describe transit system performance: efficiency, effectiveness, and overall performance. Based upon systemsÕ factor scores, the study finds that systems scoring highly on one attribute generally perform well on the remaining attributes. Further, there is an inverse relationship between system performance and subsidies, a finding that supports performance based subsidy allocations.     

Eddies around Madagascar — The retroflection re-considered

The Agulhas Current with its retroflection and attendant eddy-shedding is the cause of some of the greatest mesoscale variability in the ocean. This paper considers the area to the south and east of Madagascar, which provides some of the source waters of the Agulhas Current, and examines the propagating sea surface height signals in altimetry and output from a numerical model, OCCAM. Both show bands of variability along the axis of the East Madagascar Current (EMC) and along a zonal band near 25°S. Sequences of images plus associated temperature data suggest that a number of westward-propagating eddies are present in this zonal band. The paper then focuses on the region to the south of the island, where ocean colour and infra-red imagery are evocative of an East Madagascar Retroflection. The synthesis of data analysed in this paper, however, shows that remotely observed features in this area can be explained by anticyclonic eddies moving westward through the region, and this explanation is consistent with numerical model output and the trajectories of drifting buoys.     

Second-order perturbation added mass fluctuation on vertical vibration of tension leg platforms

Total motion in waves can be considered as a superposition of the motion of the body in still water and the forces on the restrained body. In this study the effect of added mass fluctuation on vertical vibration of tension leg platforms (TLP) in the case of vibration in still water for both free and forced vibration subjected to axial load at the top of the leg is presented. This effect is more important when the amplitude of vibration is large. Also this is important in fatigue life study of tethers. The structural model used here is very simple. Perturbation method is used to formulate and solve the problem. First- and second-order perturbations are used to solve the free and forced vibrations, respectively.     

A review of the Effect of α/W ratio on fracture toughness （Ⅱ） experimental investigation in LEFM

In part I of this series, experimental investigation in EPFM （elastic-plastic fracture mechanics） had been discussed. In this paper, experimental investigation in LEFM （ linear elastic fracture mechanics） is given. Fracture toughness tests had been carried out on three different strength steels, using both through-cracked specimens with different α/W ratio and semi-elliptical cracked specimens with variable crack size and shape. Results show that the fracture toughness KIC increases with decreasing α/W when α/W 〈 0.3 for three-point-bend specimens, and that for α/W 〉 0.3, it is independent of α/W. Shallow crack specimens, both through-cracked and surface-cracked, gave markedly higher values than deeply notched specimens. However, the effect of crack shape on fracture toughness is negligible. Results also show that the LEFM approach to fracture is not tenable for design stresses where αc is often very small, far less than 2.5 （ KIC/σy）^2.     

The design of bus route systems — An interactive location-allocation approach

An interactive modelling approach is developed to solve the practical problem of bus route network design. Possible bus routes are identified with facilities which can be located. Zones or pairs of zones in the urban area are identified with customers who will be allocated to the established facilities. It is shown that the classical Set Covering Problem is useful under the assumption of fixed demand; the Simple Plant Location Problem is effective under the assumption of demand which is sensitive to the level of bus service provided.     

Micro-Grinding Performance of Hard-Brittle Chip Materials in Precision Micro-Grinding Microgroove

The micro-structure on hard-brittle chip materials (HBCMs) surface can produce predominant functions and features. The micro-grinding with diamond wheel micro-tip is an efficient method to machine microstructure on HBCMs. However, different HBCMs and crystal orientation may have a significant influence on the micro-grinding performance. In this paper, the micro-grinding performance along different crystal orientation of HBCMs is investigated. First, a dressed 600^# diamond grinding wheel is used to micro-grind micro-structure on HBCMs. Then, the experiment of micro-grinding force test is completed. Finally, the quality of microgroove, the grinding ratio and the micro-grinding force are investigated and they are related to the crystal orientation of HBCMs. It is shown that the stronger resistance to the micro-crack propagation has the best quality of microgroove and the smallest grinding ratio. Moreover, the hardest single-crystal SiC has the best machinability and the micro-grinding force is 38.9%, 10.8% and 46.8% less than the one of sapphire, single-crystal Si and quartz glass, respectively. The direction to micro-grind easily is the crystal orientation 〈10\(\overline 1 \)0〉 for single-crystal SiC and sapphire. In addition, the micro-grinding force increases with the increase of the micro-grinding depth and feed rate and decreases with the increase of the grinding wheel speed.