Reliability assessment of maintained ship hulls with correlated corroded elements

This paper reviews the factors that affect the corrosion rate of the ship hull girder. It is shown that corrosion rates vary as a function of the location of the element in the structure, of the ocean area and type of ballast tank and steel. However, the corrosion rate in elements that are subjected to similar conditions is highly correlated.

A time-variant formulation is proposed including the correlation between the corrosion rates in neighbouring elements in modelling the degrading effect that corrosion has on the reliability of ship hulls. The effect of corrosion is represented as a time-dependent decrease of plate thickness that affects the midship section modulus. One repair policy was considered and the example results show the effect of plate replacement when its thickness reaches 75% of the original value. The results also illustrate how the limit value of the thickness in the repair criteria influences the reliability and the decision about repair actions. This is also shown for the effect of different corrosion rates, inspection intervals, and allowable stresses.     

Eddies around Madagascar — The retroflection re-considered

The Agulhas Current with its retroflection and attendant eddy-shedding is the cause of some of the greatest mesoscale variability in the ocean. This paper considers the area to the south and east of Madagascar, which provides some of the source waters of the Agulhas Current, and examines the propagating sea surface height signals in altimetry and output from a numerical model, OCCAM. Both show bands of variability along the axis of the East Madagascar Current (EMC) and along a zonal band near 25°S. Sequences of images plus associated temperature data suggest that a number of westward-propagating eddies are present in this zonal band. The paper then focuses on the region to the south of the island, where ocean colour and infra-red imagery are evocative of an East Madagascar Retroflection. The synthesis of data analysed in this paper, however, shows that remotely observed features in this area can be explained by anticyclonic eddies moving westward through the region, and this explanation is consistent with numerical model output and the trajectories of drifting buoys.     

Performance Benefits in Passive Vehicle Suspensions Employing Inerters

A new ideal mechanical one-port network element named the inerter was recently introduced, and shown to be realisable, with the property that the applied force is proportional to the relative acceleration across the element. This paper makes a comparative study of several simple passive suspension struts, each containing at most one damper and inerter as a preliminary investigation into the potential performance advantages of the element. Improved performance for several different measures in a quarter-car model is demonstrated here in comparison with a conventional passive suspension strut. A study of a full-car model is also undertaken where performance improvements are also shown in comparison to conventional passive suspension struts. A prototype inerter has been built and tested. Experimental results are presented which demonstrate a characteristic phase advance property which cannot be achieved with conventional passive struts consisting of springs and dampers only.     

Spatial Dynamics of Multibody Tracked Vehicles Part II: Contact Forces and Simulation Results

In this part of the paper, three dimensional computational capabilities, that includes significant details, are developed for the nonlinear dynamic analysis of large scale spatial tracked vehicles. Three dimensional nonlinear contact force models that describe the interaction between the track links and the vehicle components such as the rollers, sprockets, and idlers as well as the interaction between the track links and the ground are developed and used to define the generalized contact forces associated with the vehicle generalized coordinates. Tangential friction and contact forces are developed in order to maintain the stability of the track motion and avoid the slippage of the track or its rotation as a rigid body. Body and surface coordinate systems are introduced in order to define the spatial contact conditions. The nonlinear equations of motion of the tracked vehicle are solved using the velocity transformation procedure developed in the first part of this paper. This procedure is used in order to obtain a minimum set of differential equations, and avoid the use of the iterative Newton-Raphson algorithm. A computer simulation of a tracked vehicle that consists of one hundred and six bodies and has one hundred and sixteen degrees of freedom is presented in order to demonstrate the use of the formulations presented in this study.     

Spatial Dynamics of Multibody Tracked Vehicles Part I: Spatial Equations of Motion

In this paper, the nonlinear dynamic equations of motion of the three dimensional multibody tracked vehicle systems are developed, taking into consideration the degrees of freedom of the track chains. To avoid the solution of a system of differential and algebraic equations, the recursive kinematic equations of the vehicle are expressed in terms of the independent joint coordinates. In order to take advantage of sparse matrix algorithms, the independent differential equations of the three dimensional tracked vehicles are obtained using the velocity transformation method. The Newton-Euler equations of the vehicle components are defined and used to obtain a sparse matrix structure for the system dynamic equations which are represented in terms of a set of redundant coordinates and the joint forces. The acceleration solution obtained by solving this system of equations is used to define the independent joint accelerations. The use of the recursive equations eliminates the need of using the iterative Newton-Raphson algorithm currently used in the augmented multibody formulations. The numerical difficulties that result from the use of such augmented formulations in the dynamic simulations of complex tracked vehicles are demonstrated. In this investigation, the tracked vehicle system is assumed to consist of three kinematically decoupled subsystems. The first subsystem consists of the chassis, the rollers, the sprockets, and the idlers, while the second and third subsystems consist of the tracks which are modeled as closed kinematic chains that consist of rigid links connected by revolute joints. The singular configurations of the closed kinematic chains of the tracks are also avoided by using a penalty function approach that defines the constraint forces at selected secondary joints of the tracks. The kinematic relationships of the rollers, idlers, and sprockets are expressed in terms of the coordinates of the chassis and the independent joint degrees of freedom, while the kinematic equations of the track links of a track chain are expressed in terms of the coordinates of a selected base link on the chain as well as the independent joint degrees of freedom. Singularities of the transformations of the base bodies are avoided by using Euler parameters. The nonlinear three dimensional contact forces that describe the interaction between the vehicle components as well as the results of the numerical simulations are presented in the second part of this paper.     

A Simplified Model for the Effect of Weld-Induced Residual Stresses on the Axial Ultimate Strength of Stiffened Plates

The present work investigates the compressive axial ultimate strength of fillet-welded steel-plated ship structures subjected to uniaxial compression, in which the residual stresses in the welded plates are calculated by a thermo-elasto-plastic finite element analysis that is used to fit an idealized model of residual stress distribution. The numerical results of ultimate strength based on the simplified model of residual stress show good agreement with those of various methods including the International Association of Classification Societies (IACS) Common Structural Rules (CSR), leading to the conclusion that the simplified model can be effectively used to represent the distribution of residual stresses in steel-plated structures in a wide range of engineering applications. It is concluded that the widths of the tension zones in the welded plates have a quasi-linear behavior with respect to the plate slenderness. The effect of residual stress on the axial strength of the stiffened plate is analyzed and discussed.     

Strava Metro data for bicycle monitoring: a literature review

ABSTRACT

Monitoring bicycle trips is no longer limited to traditional sources, such as travel surveys and counts. Strava, a popular fitness tracker, continuously collects human movement trajectories, and its commercial data service, Strava Metro, has enriched bicycle research opportunities over the last five years. Accrued knowledge from colleagues who have already utilised Strava Metro data can be valuable for those seeking expanded monitoring options. To convey such knowledge, this paper synthesises a data overview, extensive literature review on how the data have been applied to deal with drivers’ bicycle-related issues, and implications for future work. The review results indicate that Strava Metro data have the potential—although finite—to be used to identify various travel patterns, estimate travel demand, analyse route choice, control for exposure in crash models, and assess air pollution exposure. However, several challenges, such as the under-representativeness of the general population, bias towards and away from certain groups, and lack of demographic and trip details at the individual level, prevent researchers from depending entirely on the new data source. Cross-use with other sources and validation of reliability with official data could enhance the potentiality.