Compressive tests on short continuous panels

Results of eight tests on stiffened panels under axial compression until collapse and beyond are presented. The tests consider panels with different combinations of mechanical material properties and geometric configurations for the stiffeners including the use of ‘U’-shaped stiffeners. The specimens are three bay panels with associated plate made of high tensile steel S690. Four different configurations are considered for the stiffeners that are made of mild or high tensile steel for bar stiffeners and mild steel for ‘L’ and ‘U’ stiffeners. The influence of the stiffener's geometry on the ultimate strength of the stiffened panels under compression is analyzed.     

An Internal State Variable Model for the Low Temperature Tempering of Low Alloy Steels

QuanitativelyaccuratePredictionsofquenchinduceddistOnionandresidualstressrelyontheabilitytopredictthemicrosthectUralevolUtionthroughOutthequenchProcess.InlowaIloysteels,cUrrenresearchMshavefOcusedontheformationldneticsoffetrite,pearlite,bainiteandmartensite.However,temPeringcanhavealargeinfluenceondistOnionandresidualstrCss,andeffortstoaccountforthislagbehindthemodelingofthePrimnyphasetransihons.AsafirststeptowardsaccountingfortemPerillg,wehavedevelOpedanintemalstatevariablemodelthatuses…     

澳大利亚煤层甲烷项目为未来发展提供了路标

随着美国保德河和圣胡安盆地裸眼煤层甲烷项目的成功开发，20世纪90年代末，澳大利亚的经营者们开始钻探裸，眼垂直并。此后的几年间，澳大利亚早期煤层甲烷经营者凭借着自身的聪明才智、积极创造和灵活变通，使气井设计取得了世界上其它任何煤层甲烷开发项目中前所未有的进展。这些经营者目前正在实施结构复杂的多层多边地表内层（SIS）气井设计，这种设计有望开采全球的煤层甲烷储层。     

Electronic stability control for electric vehicle with four in-wheel motors

The electric vehicle with four direct-driven in-wheel motors is an over actuated system. A three-level control strategy of electronic stability control (ESC) is proposed to achieve optimal torque distribution for four in-wheel motors. The first level is a gain-scheduled linear quadratic regulator which is designed to generate the desired yaw moment command for ESC. Control allocation is the second level which is used to distribute the desired longitudinal tire forces according to the yaw moment command while satisfying the driver’s intent for acceleration and deceleration. The associated weighting matrix is designed using the work load ratio at each wheel to prevent saturating the tire. The third level is slip ratio control (SRC) which is employed at each wheel to generate the desired longitudinal tire force based on a combined-slip tire model. Simulation results show that the proposed method can enhance the ESC performance for the test maneuvers. Since the tire model is often unknown for practical implementation, the effectiveness of the SRC is studied using the sine with dwell test. It is found that the SRC is not crucial for achieving performance similar to the proposed method with SRC, if the slip ratio can be maintained in the stable region using traction control system/anti-lock braking system.     

Application of a thermodynamic model with a complex chemistry to a cycle resolved knock prediction on a spark ignition optical engine

A combination of experimental and numerical methodologies is proposed for the investigation of knocking in spark ignition engines to aid in better understanding the physical and chemical processes that occur and to exploit the capabilities of a developed computational tool. The latter consists of a thermo-fluid dynamics model, which is part of an advanced 1-D fluid dynamics code for the simulation of the entire engine, and a complex chemistry model, which can be embedded into the thermo-fluid dynamics model using the same integration algorithm for the conservation equations and the reacting species. Their mutual interaction in the energy balance will be considered. The experimental activity was carried out in the combustion chamber of an optically accessible, single-cylinder P.F.I. engine equipped with a commercial head. The experimental data consisted of optical measurements correlated to the combustion and auto-ignition processes within the cylinder. The optical measurements were based on 2-D digital imaging, UV visible natural emission spectroscopy and the chemiluminescence of radical species (OH and HCO). The engine parameters, the pressure signals of the related data and optical acquisition are compared on an individual cycle basis in the simulation by running the engine at a constant speed and varying the spark advance from normal combustion to heavy knock conditions.     

Comparison of Dynamic Models of Mr Damper for Hardware in the Loop Simulation of Large-Sized Buses

The present study has focused on the comparison of MR damper dynamic models for the purpose of hardware in the loop simulation. A vehicle dynamic model for large-sized bus and a control logic for MR damper was built. Two typical MR damper models, viz. Bouc-Wen and hyperbolic tangent model have been considered in this study and the advantages and disadvantages of each model on the aspect of HILS system is discussed. We discussed the limitations of each model based on the analysis of the vehicle dynamic simulation. The results showed that the existing models are not suitable for HILS system. We proposed the modified hyperbolic tangent model by adopting low-pass filters. The results from the simulation showed the advantages of the modified model which were validated through HILS system.     

Influence of long-wavelength track irregularities on the motion of a high-speed train

Vertical track irregularities over viaducts in high-speed rail systems could be possibly caused by concrete creep if pre-stressed concrete bridges are used. For bridge spans that are almost uniformly distributed, track irregularity exhibits a near-regular wave profile that excites car bodies as a high-speed train moves over the bridge system. A long-wavelength irregularity induces low-frequency excitation that may be close to the natural frequencies of the train suspension system, thereby causing significant vibration of the car body. This paper investigates the relationship between the levels of car vibration, bridge vibration, track irregularity, and the train speed. First, this study investigates the vibration levels of a high-speed train and bridge system using 3D finite-element (FE) transient dynamic analysis, before and after adjustment of vertical track irregularities by means of installing shimming plates under rail pads. The analysis models are validated by in situ measurements and on-board measurement. Parametric studies of car body vibration and bridge vibration under three different levels of track irregularity at five train speeds and over two bridge span lengths are conducted using the FE model. Finally, a discontinuous shimming pattern is proposed to avoid vehicle suspension resonance.     

Morphological Change and Number-Size Distributions of Particulate Matter (PM) from a Diesel Generator Operated with Wood Pyrolysis Oil-Butanol Blended Fuel

This report details our experimental study investigating particulate matter (PM) emissions from a diesel generator fueled with wood pyrolysis oil (WPO)–butanol blended fuel for electricity generation. Particle number-size distributions and PM mass concentrations from diesel, n-butanol, and WPO-butanol blended fuels were investigated via aerosol measurements using a fast mobility particle sizer and an aerosol monitor with three generator outputs (0, 3.3, and 6.6 kWe). For the n-butanol and WPO-blended fuels, the total number concentrations of exhaust particles were higher than that of conventional diesel combustion; however, the PM mass was observed to be nearly zero for all the engine operating conditions due to the higher number concentration in the nuclei mode. The morphology of the exhaust particles was investigated by analyzing transmission electron microscopy (TEM) micrographs. The morphology of the particles was drastically changed according to the test fuels and engine loads. Two types of particles were observed, including soot and coke shaped particles. These results were directly related to the immaturity of incipient soot particles due to the different physical properties and chemical compositions of the fuels.     

充满挑战的中国汽车导航业

中国消费者导航使用频率高 根据Strategy Analytics对北美、欧洲和中国市场进行的调查,中国的驾车者对导航仪的使用最为频繁. 2011年11月StrategyAnalytics分别在西欧和美国各抽取1200名、在中国抽取2000名用户,就消费者对嵌入式导航、便携式导航及手机导航的兴趣、习惯和满意度等问题进行了调研.调研结果显示,嵌入式导航的使用频率比另两类导航更高.