Fuel consumption of fuel cell hybrid vehicles considering battery SOC differences

Fuel cell hybrid vehicles (FCHVs) have become one of the most promising candidates for future transportation due to current energy supply problem and environmental problem. Fuel economy is an important factor in FCHVs. In order to properly evaluate the fuel economy of an FCHV, the initial battery state of charge (SOC) and the final battery SOC have to be identical so that the effect of the battery energy usage on the fuel economy is neglected. In the simulation or in the real driving, however, the final battery SOC is usually different from the initial battery SOC, and the final battery SOC often depends on the power management strategy. To consider the difference between the two battery SOC values, the concept of equivalent fuel consumption is presented by two methods. One is based on the relationship between delta SOC and delta fuel consumption, and the other is based on the optimal control theory. Two rule-based power management strategies for an FCHV are presented, and for each strategy, the fuel economy is evaluated based on the two methods. The characteristics of the two methods are discussed and compared, and the superior one is selected based on the comparison.     

Topology optimization of gas flow channel routes in an automotive fuel cell

An efficient topology optimization method for fluid-structure problems was developed in an effort to determine the optimum flow channel route in a fuel cell bipolar plate from first principles. This study describes the derivation and solution of new mathematical equations for topology optimization combining a density-based algorithm, the interpolation method of moving asymptotes (MMA), and the incompressible Navier-Stokes equation with a term representing the chemical reaction between hydrogen and the catalyst. The present method is based on the finite element method with a newly developed reaction rate equation. In this model, a topology variable of 0 represents viscous flow, whereas a value of 1 indicates porous flow. The flow velocity and pressure were obtained from the Navier-Stokes equation and constraints and element matrices for sensitivity analyses during the optimization. MMA was utilized to calculate the optimum flow routes in the design domain. The influence of the key design parameter q and the pressure drop on the optimum topology were also investigated. The channel topology became smoother with decreasing q, and the number of channels increased with increasing pressure drop.     

Prediction of the dimensional deformation of the addendum and dedendum after the warm shrink fitting process using a correction coefficient

The warm shrink fitting process is generally used to assemble automobile transmission parts (shafts/gears). However, this process causes a deformation in the addendum and dedendum of the gear depending on the fitting interference and gear profile, and this deformation causes additional noise and vibration between the gears. To address these problems, the warm shrink fitting process is analyzed by considering the error in the dimensional deformation of the addendum and dedendum found when comparing the results of a theoretical analysis and finite element analysis (FEA). A correction coefficient that reduces this error is derived through an analysis of the difference in the cross-sectional area between the shapes used for the theoretical analysis and that of the actual gear, and a closed-form equation to predict the dimensional deformation of the addendum and dedendum is proposed. The FEA method is proposed to analyze the thermal-structural-thermal coupled field analysis of the warm shrink fitting process (heating-fitting-cooling process). To verify the closed-form equation using the correction coefficient, measurements are made of actual helical gears used in automobile transmissions. The results are in good agreement with those given by the closed-form equation.     

Mixing over the steep side of the Cycladic Plateau in the Aegean Sea

Intensive microstructure sampling over the southern slope of the Cycladic Plateau found very weak mixing in the pycnocline, centered on a thin minimum of diapycnal diffusivity with Kρ=1.5×¹⁰−6 m² s^− 1. Below the pycnocline, Kρ increased exponentially in the bottom 200 m, reaching 1 × 10^− 4 m² s^− 1 a few meters above the bottom. Near-bottom mixing was most intense where the bottom slope equaled the characteristic slope of the semi-diurnal internal tide. This suggests internal wave scattering and/or generation at the bottom, a conclusion supported by near-bottom dissipation rates increasing following rising winds and with intensifying internal waves. Several pinnacles on the slope were local mixing hotspots. Signatures included a vertical line of strong mixing in a pinnacle's wake, an hydraulic jump or lee wave over a downstream side of the summit, and a ‘beam’ sloping upward at the near-inertial characteristic slope. Because dissipation rate averages were dominated by strong turbulence, ?/νN² > 100, the effect on Kρ of alternate mixing efficiencies proposed for this range of turbulent intensity is explored.     

Impact of phytoplankton community size on a linked global ocean optical and ecosystem model

We isolated the effect phytoplankton cell size has on varying remote sensing reflectance spectra (R_rs(λ)) in the presence of optically active constituents by using optical and radiative transfer models linked in an offline diagnostic calculation to a global biogeochemical/ecosystem/circulation model with explicit phytoplankton size classes. Two case studies were carried out, each with several scenarios to isolate the effects of chlorophyll concentration, phytoplankton cell size, and size-varying phytoplankton absorption on R_rs(λ). The goal of the study was to determine the relative contribution of phytoplankton cell size and chlorophyll to overall R_rs(λ) and to understand where a standard band ratio algorithm (OC4) may under/overestimate chlorophyll due to R_rs(λ) being significantly affected by phytoplankton size. Phytoplankton cell size was found to contribute secondarily to R_rs(λ) variability and to amplify or dampen the seasonal cycle in R_rs(λ), driven by chlorophyll. Size and chlorophyll were found to change in phase at low to mid-latitudes, but were anti-correlated or poorly correlated at high latitudes. Phytoplankton size effects increased model calculated R_rs(443) in the subtropical ocean during local spring through early fall months in both hemispheres and decreased R_rs(443) in the Northern Hemisphere high latitude regions during local summer to fall months. This study attempts to tease apart when/where variability about the OC4 relationship may be associated with cell size variability. The OC4 algorithm may underestimate [Chl] when the fraction of microplankton is elevated, which occurs in the model simulations during local spring/summer months at high latitudes in both hemispheres.     

俄罗斯新一代机车车辆(续完)——电气设备、车辆的模块化结构及客车的可靠性

6 电气设备 目前已确定了改善远景客运机车车辆的使用性能和运营性能的固定趋势,同时提高设备的质量和可靠性,导致了用电器品种和数量的增加,改进电气设备的结果提高了电能消耗量.由于节约电能是资源储备计划的组成部分之一,故无论对现有车辆还是远景车辆,均产生用电量优化的课题.     

Performance of Two Types of Mooring Systems in the Heave Motion of a Two-body Floating Wave Energy Converter

Journal of Marine Science and Application - This work investigated the influence of two types of mooring systems on the hydrodynamic performance of a two-body floating wave energy converter (WEC)....     

Perceived risk of lock-in in the front-end phase of major transportation projects

Transportation - Lock-in is defined as the tendency to continue with an inefficient decision or project proposal. The front-end phase is critical to project success, yet most studies have focused...     

Structural relationships among shipper’s perception,value, and choice intention of Korea–China train ferry service

ABSTRACT

The logistics environment between China and Korea has been changing rapidly in line with the ‘Go West’ policy of international trade and logistics area. The policy includes the BRI, Western Development Strategy, and Korea–China FTA. Against this background, the Korea–China train ferry (KCTF) is being newly illuminated as an alternative mode to cope with the logistics environment between Korea and China. One of the key success factors of the KCTF depends on, among others, shippers’ perception, which will affect the choice and the successful operation of the KCTF. From this perspective, this paper develops seven hypotheses based on the Theory of Reasoned Action (TRA) and Technology Acceptance Model (TAM). We test these hypotheses using Structural Equation Modeling (SEM) to explore the structural relationship between shippers’ behavioral beliefs influencing the perceived usefulness, the attitude toward and intention to choose the KCTF. The test results confirm that among the behavioral beliefs, transport accessibility in association with an efficient network of inland roads and railway networks is an important prerequisite. In addition, we verified a high statistical significance in the structural relationships among perceived usefulness, the attitude toward and the intention to choose the KCTF.