Deep foundation pit excavation procedure optimization considering creep deformation on nearby metro tunnelEI北大核心

Research purposes: The existing researches about excavating procedures of deep foundation pit on nearby metro tunnel in soft formation are lack of systematicness, and creep characteristics of soft clay are not usually taken into consideration. This paper takes Qianhaiwan station of Metro Line 11 in Shengzhen as engineering background and considers creep characteristics in sludge formation. The influence of step excavation in the transversal, longitudinal and vertical directions on the deformation of foundation pit and nearby subway tunnel are simulated, which may be expected to provide theoretical basis for choosing foundation pit excavation procedure of Qianhaiwan station. Research conclusions: (1) The segment far away from tunnel should be excavated firstly when only transversal step excavation was undertaken along the horizontal direction of foundation pit. (2) The maximum horizontal displacement of the piles show exponential relations with the number of segments when step excavation of foundation pit was undertaken in vertical and transversal or longitudinal. If thickness of every step excavation was limited in 1.5~2 m, the horizontal displacement of the pile near tunnel can be reduced about 9 percent when there is no horizontal step excavation. (3) Transversal step excavation with segments far from tunnel excavated firstly was found to be the best step excavation method under the same condition of step number and support, and longitudinal and transversal step excavation followed while longitudinal step excavation was the last. (4) The research results have guiding significance for foundation pit of Qianhaiwan station and similar projects.     

A fuzzy stochastic approach to the multicriteria selection of an aircraft for regional chartering

This article deals with the problem of decision support for the selection of an aircraft. This is a problem faced by an airline company that is investing in regional charter flights in Brazil. The company belongs to an economic group whose core business is logistics. The problem has eight alternatives to be evaluated under 11 different criteria, whose measurements can be exact, stochastic, or fuzzy. The technique chosen for analyzing and then finding a solution to the problem is the multicriteria decision aiding method named NAIADE (Novel Approach to Imprecise Assessment and Decision Environments). The method used allows tackling the problems by working with quantitative as well as qualitative criteria under uncertainty and imprecision. Another considerable advantage of NAIADE over other multicriteria methods relies in its characteristics of not requiring a prior definition of the weights by the decision maker. As a conclusion, it can be said that the use of NAIADE provided for consistent results to that aircraft selection problem. Copyright © 2012 John Wiley & Sons, Ltd.     

Construction Risk Management for Deep Excavation Adjacent to In operation Bored Tunnels

营运中的盾构隧道在邻近施工时周围地盘的应力可能因扰动而重新分布,使得盾构隧道暴露在因变形或位移衍生的结构损坏或营运中断等高风险下。为降低相关风险发生的可能性或后果的严重性,高雄计划将高雄车站段地下化工程捷运-R11永久站施工纳入风险管理,通过风险辨识、分析、评估以及以监测、巡检及沟通为基础的风险追踪查核等手段执行风险管理。依本计划执行成果,位于基地两侧营运中的盾构隧道在永久站主体工程开挖施工期间,各项风险均受到妥善的追踪、管控及处置。     

Finite element analysis of overlay incorporating stress absorbing membrane interlayers against reflective cracking

A wheel tracking test was modelled to gain better understanding of the deflection and stress-strain distribution in an overlaid cracked pavements with and without membrane interlayer （SAMI）. For this purpose, commercial finite element software Abaqus 6.7-1 was used. Two different models were considered, one incorporating stress absorbing membrane interlayers （SAMIs） and the other without SAMI. In the study, full bond condition was assumed for the boundaries between the layers, and a linear elastic model was used for the analysis. The results show that introduction of SAMI caused greater deflection of the pavement. It is found that although with SAMIs, low stiffness is required, a very low stiffness may yield undesirable results. The results show that the introduction of SAMIs results in high strain concentration around the crack region, whilst the strain in the overlay is smaller than the values predicted in the models without SAMIs.     

An experimental study of the effect of low-noise wheels in reducing noise and vibration

Wheel/rail interaction is a major source of railway noise. A low-noise wheel structure is developed and its effect on noise reduction is investigated. This low-noise wheel employs a rubber material inserted into the steel rim or mounted on the wheel surface. The low-noise wheel has low stiffness and a high-damping ratio compared to a solid wheel. Measurement shows that it reduces rolling and squealing. It turns out that a subway line with the proposed wheel could reduce its interior noise level by 4–5 dB(A) and vehicle vibration level by 7–8 dB. While the proposed structure seems promising in noise reduction for railway vehicles, the endurance and cost effectiveness of the low-noise wheel are yet to be verified.     

理解消费者对质量的定义

汽车产品的质量总是会受到巨大的关注。质量较差会导致财务成本的增加,这使得制造商把提升质量作为一项商业必要的手段。过去的数年中有无数方法和流程被用来减少浪费和消除缺陷 (比如6-Sigma法和TQM完全质量管理法)。我们并不缺少这样的衡量工具,来衡量因质量问题和返工而产生的负面经济效益。运用这些衡量工具能够理解质量对每辆车或者公司的盈利能力造成的影响,并且帮助公司取得显著的产品质     

基于条件的近岸风能维修策略综述（英文）

The existing maintenance strategies of offshore wind energy are reviewed including the specific aspects of condition-based maintenance, focusing on three primary phases, namely, condition monitoring, fault diagnosis and prognosis, and maintenance optimization. Relevant academic research and industrial applications are identified and summarized. The state of art, capabilities,and constraints of condition-based maintenance are analyzed. The presented research demonstrates that the intelligent-based approach has become a promising solution for condition recognition, and an integrated data platform for offshore wind farms is significant to optimize the maintenance activities.     

两类锚泊系统在漂浮式双体浮动式波能转换装置垂荡运动状态下的性能（英文）

This work investigated the influence of two types of mooring systems on the hydrodynamic performance of a two-body floating wave energy converter(WEC). It also investigated the effects of the physical parameters of the mooring system on the amount of extractable power from incident waves in the frequency domain. The modeled converter comprised a floating body(a buoy), a submerged body with two mooring systems, and a coupling system for two bodies. The coupling system was a simplified power take-off system that was modeled by a linear spring-damper model. The tension leg mooring system could drastically affect the heave motion of the submerged body of the model and increase relative displacement between the two bodies. The effects of the stiffness parameter of the mooring system on power absorption exceeded those of the pretension tendon force.     

Review of Condition-Based Maintenance Strategies for Offshore Wind Energy

Journal of Marine Science and Application - The existing maintenance strategies of offshore wind energy are reviewed including the specific aspects of condition-based maintenance, focusing on three...     

Research and design of ship-shore integrated engine room intelligent operation and maintenance system based on data brain北大核心CSCD

[目的]为提升舰船机舱运维的智能化水平,针对机舱设备种类多、数量大、耦合关系复杂等特点,梳理机舱运维智能化应用的技术路线,开发船岸一体化机舱智能运维系统。[方法]首先,分析国内外机舱智能运维技术的发展趋势,融合利用健康管理、大数据挖掘、数字孪生、数据轻量化传输等技术优势;然后,设计符合舰船机舱特点的一体化智能运维系统。[结果]提出了一种基于数据大脑赋能的机舱智能运维系统功能框架、平台设计、运行体系、运行流程及关键技术应用。[结论]研究成果可为舰船机舱智能运维系统设计及应用实践提供参考。