豪华车具有的尺寸工程特征

随着今年参加北京车展的豪华车逐渐增多,豪华车型可谓悉数尽出.在看了这么多豪华车之后,它的定义是什么呢,具有哪些吸引人的特征?当然,豪华车价钱这么贵,吸引人的地方肯定不是单一的,维度很多.基于本文的了解,主要从豪华车的外观品质探讨其尺寸工程特征.     

碎石基层的塑性变形对混凝土路面力学行为的影响

在这项研究中,通过与旋转硬化概念的结合来修正基于广义SMP准则的原始改良Cam-Clay模型,模拟在水泥混凝土板下碎石基层的塑性变形的发展,称之为旋转硬化Cam-Clay模型.模型通过预测塑性变形累计曲线和对碎石基层循环加载的三轴压缩试验得到的试验值相比较来确认.模型成功地预测了试件塑性变形的发展,塑性变形在一开始时迅速增长,此后增长的速率减小.该模型与三维有限元模型 (3DFEM)结合,在足尺试验路面上进行模拟试验.试验发现,水泥混凝土路面的弯沉值随着荷载重复次数的增加而增加,表明在水泥混凝土板下由于基层的塑性变形而产生了缝隙.通过引入等效荷载次数的概念来模拟在合理的计算时间内施加大量循环荷载的塑性回应.模拟结果和试验数据比较表明该概念是有效的.此外,调查了由于基层缝隙而引起的水泥混凝土路面的力学响应(变形,压力以及弯沉).     

Novel coordinated algorithm for Traction Control System on split friction and slope road

A Traction Control System (TCS) is used to avoid excessive wheel-slip via adjusting active brake pressure and engine torque when vehicle starts fiercely. The split friction and slope of the road are complicated conditions for TCS. Once operated under these conditions, the traction control performance of the vehicle might be deteriorated and the vehicle might lack drive capability or lose lateral stability, if the regulated active brake pressure and engine torque can’t match up promptly and effectively. In order to solve this problem, a novel coordinated algorithm for TCS is brought forward. Firstly, two brake controllers, including a basic controller based on the friction difference between the two drive wheels for compensating this difference and a fuzzy logic controller for assisting the engine torque controller to adjust wheel-slip, are presented for brake control together. And then two engine torque controllers, containing a basic PID controller for wheel-slip control and a fuzzy logic controller for compensating torque needed by the road slope, are built for engine torque control together. Due to the simultaneous and accurate coordination of the two regulated variables the controlled vehicle can start smoothly. The vehicle test and simulation results on various road conditions have testified that the proposed method is effective and robust.     

B型喇叭立交环形匝道线形安全性设计探讨

通过分析车辆在B型喇叭立交环形匝道上的交通特性,提出了B型喇叭立交环形匝道线形指标的取值范围(如设计速度、平曲线半径等);通过分析B型喇叭立交安全运行的影响因素,总结了六种提高B型喇叭立交运行安全性的措施;最后建议B型喇叭立交环形匝道宜采用水滴形卵形曲线来布设,并结合实例阐述了该方法在B型喇叭立交设计中的具体应用。     

Application of Optimal Control Theory to Inverse Simulation of Car Handling

The application of Optimal Control Theory to time-optimal inverse simulation of car handling was investigated. Time-optimal inverse simulation of car handling involves the calculation of driver actions required to perform specified manoeuvres, in as short a time as possible. Driver actions consist of time-histories of front wheel steer rate and longitudinal force. Optimal time-histories of these quantities were calculated using the Gradient method after formulating the problem as one of optimal control. Simulation results are presented for two different cars performing similar lane-changes. These results show significant differences in necessary driver actions for different cars and demonstrate the suitability of the approach taken.     

Scattering of oblique surface water waves by thin vertical barrier over undulating bed topography

The present study deals with the scattering of oblique surface water waves by small undulation on the bottom in the presence of a thin vertical barrier. Here, three different configurations of vertical barriers are investigated. Perturbation analysis is employed to determine the physical quantities, namely, the reflection and transmission coefficients. In this analysis, many different Boundary Value Problems (BVPs) are obtained out of which the first two bvps are considered. The zeroth order bvp is solved with the aid of eigenfunction expansion method. The first order reflection and transmission coefficients are derived in terms of the integrals by the method of the Green’s integral theorem. The variation of these coefficients is plotted and analyzed for different physical parameters. Furthermore, the energy balance relation, an important relation in the study of water wave scattering, is derived and checked for assuring the correctness of the numerical results for the present problem.     

Thermal exchanges at air-water interfacies and reproduction of temperature vertical profiles in water columns

For a 3-D eutrophication-diffusion macromodel of the central part of the Venice Lagoon, air-water heat fluxes are computed interpolating, through Fourier series expansion, meteoclimatic variables averaged over a thirty years survey. Also reproduced with the same interpolation methods, is the daily fluctuation of incident light as well as the annual variation of the photoperiod.With an interative procedure temperature values, to be assigned at each grid's point and corresponding to each hour of a reference year, are computed also accounting for the thermal inertia of water columns of varying depths. By statistical examination of temperature vertical profiles, depth varying diffusivities are also estimated, which enables, without assumption of an instantaneous mixing, the reproduction of heat diffusion from the surface to the bottom water cells.Procedures, preliminary refined and verified for a one-dimensional vertical system input, are next implemented on a three-dimensional submodel of reduced size provided of “open boundaries”: this last submodel, under a continuous input of energy and of matter is seen to attain a steady states as well as to be capable of simulating regime conditions. A further validation is performed, on a submodel of 43 × 47 × 20 cells, encompassing a limited portion of the macromodel and presenting the actual lagoon bathymetry.Macromodel's seasonalisation so achieved, enables for a more correct simulation of the periodical behaviour of light and of temperature, forcing functions governing the eutrophication phenomena.     

Labour/management relations in North American ports

Labour/management practices in North American ports are undergoing fundamental changes in their shift from confrontation to Cooperation. Cooperation is increasing to counter competitive threats from other ports arising from intermodalism and transportation deregulation. Technological advances in port operations are reducing the number of longshore forces required and changing the skills required of those which remain. A recent survey of North American container terminals provided a 'snapshot' of current approaches of improving labour/management relations. Focusing on growth and development needs of individual port workers enhances morale and motivation resulting in environment. Many ports are introducing new management techniques including improved communications and training to enhance the motivation and productivity of their longshore forces.     

On the application of the Haskind-Hanaoka relations to hydroelasticity problems

The Haskind-Hanaoka relations for obtaining the wave-exciting forces, given the incoming and radiation potentials in floating rigid-body dynamics, are extended to deformable-body dynamics in the presence of a free surface and within the assumption of linear potentials theory. These relations are applied to the mode-superposition and the direct methods of solution of hydroelasticity problems. In other words, it is shown that regardless of the structural analysis method used in a hydroelasticity problem, the Haskind-Hanaoka relations can be used to calculate the wave-exciting forces without solving for the diffraction potential explicitly. These relations can also be used in the composite singularity distribution method to increase further the computational efficiency.     

铌磷半钢在中磷铸铁闸瓦中应用的研究

本文通过对用铌磷半钢配制的中磷闸瓦的金相组织、力学性能、物理性能和摩擦-磨损特性的研究及其实际运行,证明:其质量指标和使用性能完全满足 TB1159-76标准,并超过普通中磷闸瓦的技术水平;可使中磷铸铁闸瓦的原材料成本降低10%左右.