浅谈大型门座起重机整机运输及滚装上岸的安全管理

大型门座起重机整机运输及滚装上岸过程存在很大的风险,本文以滨海港北区10万t级通用码头一期工程为例,探讨了大型门座起重机整机运输及滚装上岸的安全管理。     

基于欧洲规范的板桩码头设计方法简介

基于极限状态设计的欧洲土木工程设计规范Eurocode代表了当前工程设计的最高水平;部分欧洲国家板桩码头设计则直接采用该规范,例如英国海上工事设计规范BS6349。本文介绍了基于BS6349和Eurocode规范的板桩码头设计方法,有助于设计人员理解和使用欧洲板桩规范。     

循环载荷下考虑累积塑性影响的含中心穿透裂纹板CTOD研究

裂纹尖端张开位移(CTOD)是评估结构材料韧性以及分析低周疲劳破坏引起的裂纹扩展的重要参量。结合Dugdale模型,以裂纹尖端累积塑性应变为控制参量,提出了一个循环载荷下含裂纹船体板的CTOD计算模型;利用有限元法模拟了裂纹尖端累积塑性应变、平均应力、裂纹长度等相关因素影响;结合最小二乘法拟合出了基于累积塑性塑性应变、平均应力比以及裂纹长度的两阶多项式。研究表明,基于累积塑性应变的CTOD计算模型为正确评估循环载荷下船体板的累积塑性破坏提供了一种新途径。     

堆料机悬臂皮带机打滑原因的分析与处理

堆料机的悬臂皮带机在使用过程中,当悬臂上仰角度达到正常需要工作角度的某一值时,皮带会发生打滑现象,尤其是应用于运送铁矿和采用螺旋张紧或液压张紧装置张紧的悬臂皮带机,更易出现打滑的现象。通过实例分析其打滑机理,并提出解决办法。     

可逆卡诺制冷机和热泵的输出率密度分析与优化

以逆卡诺循环的输出率密度(对循环最大比容平均的循环输出率),即卡诺制冷机的制冷率密度和卡诺热泵的供热率密度作为热力性能目标,分别对内可逆卡诺制冷机和热泵进行分析与优化,导出了最佳换热器面积分配的关系式,计算分析了热源温比对输出率密度与性能系数关系的影响。所得结果不同于以制冷率和供热率为目标的优化结果,对装置设计具有一定理论上的指导意义。     

小型舰船航海仪器数据采集装置的设计与实现

提出了一种以C8051F340单片机作为核心器件的航海仪器信息采集装置,该装置利用了C8051F340单片机自身具有的USB接口、UART0、UART1的输入输出接口,以最小的硬件开销,实现了对部分航海仪器数据的采集、实时处理数据及显示的功能。具有电路简单、精度高、功耗低、抗干扰能力强、通用性强的特点。     

低阻通风船体的远程控制测试平台开发（英文）

This paper addresses the development and testing of a remotely controlled boat platform with an innovative air-ventilated hull. The application of air cavities on the underside of ship hulls is a promising means for reducing hydrodynamic drag and pollutant emissions and increasing marine transportation efficiency. Despite this concept’s potential, design optimization and high-performance operation of novel air-cavity ships remain a challenging problem. Hull construction and sensor instrumentation of the model-scale air-cavity boat is described in the paper. The modular structure of the hull allows for easy modifications, and an electric propulsion unit enables self-propelled operation. The boat is controlled remotely via a radio transmission system. Results of initial tests are reported, including thrust, speed, and airflow rate in several loading conditions. The constructed platform can be used for optimizing air-cavity systems and testing other innovative hull designs. This system can be also developed into a high-performance unmanned boat.     

A havelock source panel method for near-surface submarines

A panel method is described for calculating potential flow around near-surface submarines. The method uses Havelock sources which automatically satisfy the linearized free-surface boundary condition. Outputs from the method include pressure field, pressure drag, wave resistance, vertical force, trim moment and wave pattern. Comparisons are made with model tests for wave resistance of Series 58 and DARPA SUBOFF hulls, as well as with wave resistance, lift force and trim moment of three length-to-diameter variants of the DSTO Joubert submarine hull. It is found that the Havelock source panel method is capable of determining with reasonable accuracy wave resistance, vertical force and trim moment for submarine hulls. Further experimental data are required in order to assess the accuracy of the method for pressure field and wave pattern prediction. The method is implemented in the computer code “HullWave” and offers potential advantages over RANS-CFD codes in terms of speed, simplicity and robustness.     

A non-geometrically similar model for predicting the wake field of full-scale ships

The scale effect leads to large discrepancies between the wake fields of model-scale and actual ships, and causes differences in cavitation performance and exciting forces tests in predicting the performance of actual ships. Therefore, when test data from ship models are directly applied to predict the performance of actual ships, test results must be subjected to empirical corrections. This study proposes a method for the reverse design of the hull model. Compared to a geometrically similar hull model, the wake field generated by the modified model is closer to that of an actual ship. A non- geometrically similar model of a Korean Research Institute of Ship and Ocean Engineering (KRISO)’s container ship (KCS) was designed. Numerical simulations were performed using this model, and its results were compared with full-scale calculation results. The deformation method of getting the wake field of full-scale ships by the non-geometrically similar model is applied to the KCS successfully.