Railway wheel-flat detection and measurement by ultrasound

This work presents an innovative ultrasound technique designed to detect and quantify flats formed in the rolling surface of railway wheels. Differently from other approaches, ultrasonic pulses (Rayleigh waves) are sent over a measuring rail. The variations in the round-trip time of flight (RTOF) of the ultrasound pulse to the rail-wheel contact point allow detecting and quantifying the wheel-flats. In spite of the wear state of the irregularity, the method provides the loss of material and the length of the flat originally formed by abrasion. A theoretical background supports the technique which offers many advantages for railway maintenance. Simulations and experimental results match the expected ones.     

Influence of vehicle driving parameters on the noise caused by passenger cars in urban traffic

In this work, a sample of vehicles has been instrumented to measure of variables that influence vehicle noise emissions in Madrid. A circuit reproducing a normal travel pattern in large city is traveled by a fleet of vehicle models representing the fleets of cars in a European city. A sample of drivers covers the test track under different traffic conditions. Driving parameters and noise emitted have been recorded in each test and average values have been extracted. These data have been analyzed to define the noise emissions produced by a vehicle in real driving conditions and to identify the noisiest driving behaviors.     

A structural model of the use of automobiles by households: a case study of urban Australia

Central to the development of transport energy plans are predictions of automobile use. Together with a knowledge of the fuel efficiency of the vehicle fleet, usage acts interdependently to determine the amount of fuel consumed. In this paper we develop an econometric model system at the household level which treats vehicle use, fuel cost, and vehicle fuel efficiency as functionally interdependent. The data is drawn from Wave 1 of a4‐wave panel of Sydney households. The empirical evidence provides new insights into the influences on vehicle use and sets the context for continuing research efforts.     

One city,three models: comparison of land‐use/transport policy simulation models for Dortmund

The paper reports on simulation experiments conducted by the International Study Group on Land‐Use/Transport Interaction (ISGLUTI) for the metropolitan region of Dortmund in the Federal Republic of Germany. Three land‐use/transport simulation models were applied to the Dortmund region: the DORTMUND model developed at the University of Dortmund, the LILT model being used at University College London and the MEPLAN package developed by Marcial Echenique & Partners in Cambridge. The three models are briefly characterized and their ex‐post forecasts are compared with the actual development of the region. The final section of the paper compares how the three models respond to a common set of assumptions and policies from the fields of land‐use control, traffic management and transport investment. The differences in model response give insights into the validity of the theoretical foundations and internal structure of the models.     

Sample size requirements for stated choice experiments

Stated choice (SC) experiments represent the dominant data paradigm in the study of behavioral responses of individuals, households as well as other organizations, yet in the past little has been known about the sample size requirements for models estimated from such data. Traditional orthogonal designs and existing sampling theories does not adequately address the issue and hence researchers have had to resort to simple rules of thumb or ignore the issue and collect samples of arbitrary size, hoping that the sample is sufficiently large enough to produce reliable parameter estimates, or are forced to make assumptions about the data that are unlikely to hold in practice. In this paper, we demonstrate how a recently proposed sample size computation can be used to generate so-called S-efficient designs using prior parameter values to estimate panel mixed multinomial logit models. Sample size requirements for such designs in SC studies are investigated. In a numerical case study is shown that a D-efficient and even more an S-efficient design require a (much) smaller sample size than a random orthogonal design in order to estimate all parameters at the level of statistical significance. Furthermore, it is shown that wide level range has a significant positive influence on the efficiency of the design and therefore on the reliability of the parameter estimates.     

A dynamic stochastic assignment model for the analysis of general networks

The paper adopts the framework employed by the existing dynamic assignment models, which analyse specific network forms, and develops a methodology for analysing general networks. Traffic conditions within a link are assumed to be homogeneous, and the time varying O-D travel times and traffic flow patterns are calculated using elementary relationships from traffic flow theory and link volume conservation equations. Each individual is assumed to select a departure time and a route by trading off the travel time and schedule delay associated with each alternative. A route is considered as reasonable if it includes only links which do not take the traveller back to the origin. The set of reasonable routes is not consistant but depends on the time that an individual decides to depart from his origin. Equilibrium distributions are derived from a Markovian model which describes the evolution of travel patterns from day to day. Numerical simulation experiments are conducted to analyse the impact of different work start time flexibilities on the time dependent travel patterns. The similarity between link flows and travel times obtained from static and dynamic stochastic assignment is investigated. It is shown that in congested networks the application of static assignment results in travel times which are lower than the ones predicted by dynamic assignment.     

基于车激动力响应互相关指标的桥梁基础冲刷诊断方法

针对当前桥梁基础冲刷诊断和检测方法过程复杂、成本高且受环境影响大等问题,提出一种基于车激动力响应互相关指标的桥梁基础冲刷诊断方法。该方法通过桥墩和桥跨不同测点的纵向加速度响应自由衰减段信号的互相关分析,建立基础冲刷诊断指标体系,实现冲刷定位和均匀性诊断。首先,依据互相关函数幅值向量置信度判据指标进行基础冲刷初判;然后,通过响应互相关函数幅值向量因子变化率向量进行冲刷定位,再根据横桥向互相关函数幅值变化率向量诊断冲刷均匀性;并通过统计评估方法提高诊断精度;最后,结合1座连续梁桥算例进行多种冲刷工况的数值仿真分析,对所提方法的有效性和适用性进行验证。结果表明：该方法能够很好地实现基础冲刷的定位和均匀性诊断,指标具有较高敏感性;同时具有较好的抗噪性能,通过所提出诊断指标体系的综合使用可消除噪声对诊断结果的干扰。该方法具有诊断结果精度高、过程简便易行、无需进行复杂且误差较大的模态识别、允许试验测试参数和条件适量变化等优点,可嵌入常规桥梁荷载试验同步开展,具有很好的工程应用潜力和实用价值。     

Insights into vehicle trajectories at the handling limits: analysing open data from race car drivers

Race car drivers can offer insights into vehicle control during extreme manoeuvres; however, little data from race teams is publicly available for analysis. The Revs Program at Stanford has built a collection of vehicle dynamics data acquired from vintage race cars during live racing events with the intent of making this database publicly available for future analysis. This paper discusses the data acquisition, post-processing, and storage methods used to generate the database. An analysis of available data quantifies the repeatability of professional race car driver performance by examining the statistical dispersion of their driven paths. Certain map features, such as sections with high path curvature, consistently corresponded to local minima in path dispersion, quantifying the qualitative concept that drivers anchor their racing lines at specific locations around the track. A case study explores how two professional drivers employ distinct driving styles to achieve similar lap times, supporting the idea that driving at the limits allows a family of solutions in terms of paths and speed that can be adapted based on specific spatial, temporal, or other constraints and objectives.     

Vibration reduction of H/Shaft using an electromagnetic damper with mode change

The objective of this study is to develop a damper that can reduce the amplitude of vibration in various frequency ranges. Previous H/Shaft vibration reduction methods work in a passive way. A dynamic damper reduces the amplitude of vibration at its first mode, but vibration still appears at the second mode. A mass damper or hollow shaft can shift the natural frequency to a lower or higher region. The fixed operating frequency prevents vibration from being reduced outside the operating frequency range. The proposed damper uses electromagnets as either masses or actuators to change the damper mode between dynamic damper mode and mass damper mode. The electromagnetic damper (EMD) can change its mode to respond to the vibration excitation at both low and high frequencies. The vibration reduction performance was evaluated by FRF tests in laboratory and vehicle conditions. The results were compared with those of a dynamic damper and indicate that the amplitude of vibration is reduced by 95.6 % when the EMD is implemented on an H/Shaft, whereas only 61.9 % vibration reduction is achieved by the dynamic damper.     

Modeling multi-unit vehicle dynamics for low-speed path-following assessment off-highway

This paper proposes a non-linear dynamics model for articulated vehicles. This model is able to capture common low-speed behaviours of any articulated vehicles off-highway, such as operating for a corner or roundabout on a cambered or slippery surface. It can be used to assess the low-speed manoeuvrability of articulated vehicles under such manoeuvres and conditions. The vehicle model was validated by comparing its path tracking performance to that of the field tests.