Influence of horizontal model grid resolution on the simulated primary production in an embedded primary production model in the Norwegian Sea

The purpose of this paper is to investigate the influence of horizontal grid resolution in a physical model on an embedded primary production model. The area for the experiment was along the west coast of Norway, from 60° N to 70° N, an area of high mesoscale activity. The HYbrid Coordinate Ocean Model was coupled with the NORWegian ECOlogical Model system, and run in a nested system, consisting of three model grids with horizontal resolution of 50 km, 16 km and 4.5 km (hereafter: COARSE, MEDIUM and FINE) in the focus area. Two main results were obtained, first, the composition of the phytoplankton functional groups changed with increasing model grid resolution. In FINE, the diatoms produced a larger part (60%) of the total annual primary production than the flagellates, whereas in COARSE and MEDIUM, the primary production from the two phytoplankton groups was the same. This was explained by a higher transport of silicate into the euphotic layer in FINE compared to the other two. Second, the differences in the primary production first became large when the resolution of the model grid reached the Rossby radius of deformation. Whereas the total net primary production in MEDIUM only was 5% larger than in COARSE, the total net primary production in FINE was 20% higher than in COARSE. This was explained by the models ability to resolve mesoscale activity.     

A Preliminary Study on the Law of Ground Settlement Caused by Shield Tunnelling Based on the Stratum Characteristic Value M S北大核心CSCD

Based on an analysis of monitoring data of surface settlement in the construction of a shield running tunnel of Beijing metro, an improved hyperbolic model was proposed to fit the ground subsidence law, and the characteris⁃ tic factor M S was used to evaluate the stratum under the condition of shield construction. The relationship between stratum parameters and surface settlement was studied, with the results indicate that the surface settlement caused by shield construction complies with hyperbolic distribution and it is basically stable at 30 days, the larger the value of M S is, the better the conditions of the stratum is and the smaller the settlement is; a certain correlation exists be⁃ tween the parameters of improved hyperbolic model and the characteristic value M S . © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Research and Application of Drag Reduction by Grouting the Pipe Jacking in Complex Conditions北大核心CSCD

This paper presents the technology measures, equipment selection and required grout properties and re-lated techniques for the grouting base-station arrangement of the drag reduction system of the Fuchun River pipe jacking project, which is characterized by a combined stratum, a longitudinal curve with a large falling head, a large gradient and high water pressure. Drag reduction by grouting can effectively reduce the friction coefficient in pipe jacking construction, decrease the time and frequency of the relay station, improve construction efficiency, and re-duce the grout loss along the stratum fissure while guaranteeing grouting pressure of the terminal, is favorable for sta-ble annular bentonite grouting between the stratum fissure and the segment. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Estimation of a time‐dependent origin‐destination matrix for congested highway networks

This paper presents a time‐dependent origin‐destination (O‐D) matrix estimation procedure embedded with a dynamic traffic assignment model, in which the predictive dynamic user optimal conditions in congested networks are maintained. Two solution algorithms are proposed, namely: an iterative (ITR) scheme and a method of successive averages (MSA) scheme. It is found that the MSA scheme outperforms the ITR scheme. As a prior O‐D matrix is an important input for the problem, its quality is essential for the reliability of the matrix estimation procedure. Empirical constraints are set in relation to the quality of the prior O‐D matrix for the estimation procedure. Numerical examples are used to demonstrate the effectiveness of the proposed methodology.     

Priorities in urban transport research

Research should be fundamental to transportation as a phenomenon, and yet central to the problems that need to be solved. This paper looks at the history of transportation research in the U.S. with a view toward understanding the bases of past research priorities, and deriving a basis for proposing future priorities. As a result, varieties of research are proposed. They include research which is progressive by criteria of the field during past decades, research which is critical or established as needed by rejection of those criteria, and research which arises as newly required by recent mandates to the field. As the most significant conclusion, it is proposed that research models be built — models which put the understanding of urban structure dynamics ahead of accuracy in forecasting.The authors wish to acknowledge the assistance of Ray Blessing, Department of Urban Studies and Planning, and Thomas McKim, Department of Civil Engineering, M.I.T. This paper has profited from criticism by Professor Daniel Brand. The original version was prepared with support from the National Science Foundation.     

A reliability‐based network design problem

This paper presents a reliability‐based network design problem. A network reliability concept is embedded into the continuous network design problem in which travelers' route choice behavior follows the stochastic user equilibrium assumption. A new capacity‐reliability index is introduced to measure the probability that all of the network links are operated below their capacities when serving different traffic patterns deviating from the average condition. The reliability‐based network design problem is formulated as a bi‐level program in which the lower level sub‐program is the probit‐based stochastic user equilibrium problem and the upper level sub‐program is the maximization of the new capacity reliability index. The lower level sub‐program is solved by a variant of the method of successive averages using the exponential average to represent the learning process of network users on a daily basis that results in the daily variation of traffic‐flow pattern, and Monte Carlo stochastic loading. The upper level sub‐program is tackled by means of genetic algorithms. A numerical example is used to demonstrate the concept of the proposed framework.     

Study of the Impact of Single-and Double-tube Tunnel Systems on Rockburst in Deep-buried Extra-long Tunnelling北大核心CSCD

Rockburst is one of the main disasters for tunnelling under high ground stress. Taking the rockburst section of Ping'an Tunnel with high ground stress, which is located on Chengdu-Lanzhou Railway, as the study object, this paper adopts combined methods of filed measurement, numerical analysis, and laboratory test, and with respect to rockburst development mechanism, energy density change and rockburst strength it comprehensively analyzes the impact of two construction schemes (single-tube double-track tunnel system and double-tube single-track tunnel system) on the rockburst in deep-buried extra-long tunnels with high ground stress. The study results show that the order relation of maximum energy density at various locations of the tunnel is Uside wall >Uhance >Utunnel face >Uvault, and rockburst easily occurs at the working face of the tunnel section to be excavated and both side walls of excavated and supported section; compared with vault, hance, side wall and other locations, more energy would be released at the tunnel face, and the stress release holes shall be reasonably installed in the process of excavation; the doubletube single-track tunnel system scheme can effectively reduce the rockburst intensity and the rockburst hazards, so as to better avoid the occurrence of rockburst. © 2022, Editorial Office of Modern Tunnelling Technology. All right reserved.     

高海拔隧道施工劳动强度与供氧浓度关系研究北大核心CSCD

为研究高海拔隧道施工人员供氧浓度问题,文章通过骑行试验得到了不同人员在海拔高度为590~4000 m,氧气浓度为20.9%~29%,骑行功率为0、50 W、75 W、100 W工况下的生理指标,得到测试对象的劳动强度指数,分析研究得到以下结论:(1)在同一海拔高度、相同劳动强度工况下,提升环境氧气浓度,可以显著降低人员劳动强度指数;(2)劳动强度指数的减少与氧气浓度的增加并不是线性关系,当环境氧气浓度超过25%时,劳动强度指数的降低程度有限;(3)拟合得到了劳动负荷为100 W且氧气浓度为20.9%~25%时施工人员的劳动强度指数与海拔高度及供氧浓度的关系式。