Research on Improved Low-Energy Adaptive Clustering Hierarchy Protocol in Wireless Sensor Networks

In wireless sensor networks (WSNs), due to the limited battery power of the sensor nodes, the communication energy consumption is the main factor to affect the lifetime of the networks. A reasonable design of the communication protocol can effectively reduce the energy consumption of the network system. Based on low-energy adaptive clustering hierarchy (LEACH), an improved LEACH protocol in WSNs is proposed. In order to optimize the cluster head (CH) election in the cluster setup phase, the improved LEACH takes into account a number of factors, including energy consumption of communication between nodes, remaining energy of the nodes, and the distance between nodes and base station (BS). In the steady phase, one-hop routing and multiple-hop routing are combined to transmit data between CHs to improve energy efficiency. The forward CH is selected as relay node according to the values of path cost. The simulation results show that the proposed algorithm performs better in balancing network energy consumption, and it can effectively improve the data transmission efficiency and prolong the network lifetime, as compared with LEACH, LEACH-C (LEACH-centralized) and NDAPSO-C (an adaptive clustering protocol based on improved particle swarm optimization) algorithms.     

Performance Evaluation of Short Parabolic Trough Collectors Integrated with a Small-Scale Solar Power and Heating System

An investigation is presented on the performance of a small-scale solar power and heating system with short parabolic trough collectors (PTCs). The steady-state model of the short PTCs is evaluated with outside experiments. The model mainly contains the heat loss of the receiver, the peak optical efficiency and the incident angle factor consisting of incident angle modifier and end loss. It is found that the end loss effect is essential in this model when the length of the PTCs is less than 48 m, especially in the winter. The standard deviation of the steady-state model is 1.4%. Moreover, the potential energy efficiency ratio of the solar power and heating system is considerably larger than the coefficient of performance (COP) of general air-source heat pumps, and increases with the decrease of the condensation temperature. An overall system efficiency of 49% can be reached. Lastly, the existence of a water storage tank improves the flexibility of heating the building, and the volume of the water storage tank decreases with the increase of the heating water temperature.     

Optimal allocation of fleet’s spare parts for system reliability

Allocation of fleet’s spare parts is rarely studied due to its complexity. However, this task is extremely important because the warship’s service level highly relies on the maintenance logistics’ level. In this study, the readiness ratio is proposed as a critical index in measuring the system’s reliability. A well-established mathematical model adopting the optimization method of spare part allocation is also introduced. The objective is to minimize the number of each spare part while satisfying the fleet’s system reliability. The fault tree analysis (FTA) is applied to analyze the system’s failure logic and stratify the units on ship. As a result, the strategy of spare part sharing can be introduced in detail. The solution algorithm is developed, and the simulation experiments to obtain the key parameters are conducted. The proposed model and algorithm are applied to an actual fleet of two warships, and results show that the method above is feasible and can be directly applied into practice.     

A study of the role of seafarers in combating piracy off the coast of Nigeria

Piracy off the coast of Nigeria portends grave danger to the economic, security, and sociopolitical development of the country. It also threatens both international and regional trade as well as the stability of the West African sub-region. Despite Nigerian government’s attempts to curb piracy caused by poverty, unemployment, including corrupt and weak maritime regulatory and security institutions, attacks by pirates have continued to occur off the country’s coast. Consequent upon the adverse effects of piratical attacks on their day to day activities, seafarers can facilitate the suppression of piracy off the Nigerian coast. This paper uses statistics, provisions of international instruments and domestic legislations, the United Nations Security Council resolutions, soft laws, and opinions of researchers to examine the nature, causes, and effects of piracy on seafarers in Nigeria. The author argues that seafarers are necessary partners to curb piracy off the coast of Nigeria through enforcing maritime security conventions and other related instruments as well as testifying against pirates during trials. In conclusion, this paper contends that acts of piracy adversely affect crew members’ life, health, family, job, and finance thereby providing an overwhelming motivation for seafarers to play a role in suppressing piracy off the Nigerian coast.     

Design of Wind Turbine Blade for Solar Chimney Power Plant

Aiming at the global efficiency of solar chimney power plant (SCPP), we design a wind turbine generation device to elevate its electricity generating efficiency. Based on wind power utilization theory, a new method is proposed to design a type of wind turbine blade for SCPP. The lift and resistance coefficients on different Reynolds numbers of NACA4418 airfoil, which is suitable for experimental solar electricity generation system, are determined by Profili-V2.0 airfoil design software, a program written in Matlab to calculate chord length of the airfoil. The optimization is conducted by class-shape-transformation (CST) parameterization method and Xfoil software. An airfoil design program is designed on the basis of blade element theory and attack angle with the highest lift coefficient to iteratively determine the inflow angle and setting angle. Prandtl’s tip-loss factor is applied to correct the setting angle, after the airfoil data are input into AutoCAD to build an airfoil model which is then imported into Solidworks to draw blades. A new way is put forward to design wind turbine blades in SCPP.     

Improving operational safety during icebreaker operations

The study presented in this paper aims at investigating what safety measures that can be taken to improve the operational safety during icebreaker operations in the Baltic Sea. During icebreaker operations, the icebreaker and the assisted vessel operate in close proximity to each other, a distance which can be even smaller if weather and ice conditions are severe. This poses a severe threat to the operation, since the extremely short distance between the vessels leaves no room for error. The results, which are based on data collected through individual interviews and questionnaires, indicate several possible improvements. Firstly, on a regulatory level, the introduction of an ice navigation certificate for deck officers would set a minimal level of formal competency. Secondly, on a knowledge level, more ice navigation training and better language skills work in favour for the safety. Thirdly, on a technical level, having an electronic chart with target tracking capability increases the efficiency and safety of the passage through ice. In addition to these results, this study shows a need to further research the communication and language situation during icebreaker operations.     

Optimization of CMOS repeater driven interconnect RC line using genetic algorithm

In this work, optimization of complementary metal oxide semiconductor (CMOS) repeater driven interconnect resistive-capacitive (RC) line is carried out using genetic algorithm (GA). This work is aimed at powerdelay- product (PDP) minimization of RC interconnect at 180 nm technology node. The algorithm simultaneously optimizes the values of supply voltage, number of repeaters and repeater width for delay and PDP minimization. The accuracy of results obtained is verified by simulations from Cadence virtuoso tool. For delay minimization, comparison of GA results with previous results of the literature shows an improvement of 44.4% in the value of the optimal number of repeaters required. This improvement is obtained by increasing the repeater size, which also increases power dissipation, so a tradeoff has also been achieved in terms of PDP minimization. The comparison of PDP results obtained in this work, with the results at 70, 100, and 130 nm technologies from literature shows improvement in optimal number of repeaters required. The results of algorithm and simulations are in good agreement and demonstrate the validity of proposed algorithm.     

Enhancing the Efficiencies of Organic Photovoltaic and Organic Light-Emitting Diode Devices by Regular Nano-Wrinkle Patterns

Organic photovoltaic (OPV) cells and organic light-emitting diodes (OLEDs) are energy harvesting and generation devices that have attracted great attention these years because of their low costs, thin film structures, flexibility and environment-friendly manufacturing processes. For such thin film devices, photon management methods that increase the light absorption of OPV cells and the light extraction from OLEDs are highly desirable. Here, we report the experimental efforts to fabricate geometrically tunable and spontaneously formed nano-wrinkle structures with large areas, and the theoretical results on photon management with the nano-wrinkles.     

Study of algorithms of new slender ship theory of wave resistance

In this paper, Noblesse‘s New Slender-Ship Wave-Making Theory was investigated numerically. Detailed expressions of zeroth and 1st order wave resistance have been derived and calculation programs have also been compiled. In the single and double integral terms of Green function, the kernel function of wave resistance expression, special function expansion method and Chebyshev polynomials approach have been adopted respectively, which greatly simplify the calculation and increase the convergence speed.     

Explaining light vehicle demand evolution in interurban toll roads: a dynamic panel data analysis in Spain

Tolls have increasingly become a common mechanism to fund road projects in recent decades. Therefore, improving knowledge of demand behavior constitutes a key aspect for stakeholders dealing with the management of toll roads. However, the literature concerning demand elasticity estimates for interurban toll roads is still limited due to their relatively scarce number in the international context. Furthermore, existing research has left some aspects to be investigated, among others, the choice of GDP as the most common socioeconomic variable to explain traffic growth over time. This paper intends to determine the variables that better explain the evolution of light vehicle demand in toll roads throughout the years. To that end, we establish a dynamic panel data methodology aimed at identifying the key socioeconomic variables explaining changes in light vehicle demand over time. The results show that, despite some usefulness, GDP does not constitute the most appropriate explanatory variable, while other parameters such as employment or GDP per capita lead to more stable and consistent results. The methodology is applied to Spanish toll roads for the 1990–2011 period, which constitutes a very interesting case on variations in toll road use, as road demand has experienced a significant decrease since the beginning of the economic crisis in 2008.