How remote is remote pilotage?

“Today, the idea of allowing aircraft pilots to operate as they see fit, without any control from the land, is unthinkable. Will the same things apply to ships in twenty to thirty years’ time?”Current maritime pilotage regimes are clearly seen in some quarters as too restrictive and old fashioned. Change is “in the air” and VTS, pilotage, and the relationship between them cannot be immune to it. Subject to the attainment of the appropriate standards by both ships and their crews there is no practical reason why more flexible Vessel Traffic Management cannot be introduced. The required technology is largely available and, with the introduction of AIS, the required dynamic data can be available. Technical problems foreseen are believed capable of solution. The more significant obstacles to implementation are, therefore, largely political, commercial, organisational, and cultural. These issues are discussed in this paper taking into account the viewpoints of major stakeholders.     

Potential and benefits of AIS to Ships and Maritime Administrations

The Universal Automatic Identification System (AIS) provides a huge variety of potential applications and services which exceed the well known ship-to-ship data exchange. The purpose of this paper is to address the most important AIS services, in particular the AIS position report and the AIS safety-related and binary messages (“AIS telegrams”). The main issue is the impact of this new technology on the on-board use of AIS in collision avoidance (and its limitations) as well as the impact on shore-based services such as Vessel Traffic Service (VTS), port management and the need of an effective AIS network.     

Structural safety assessment of a pontoon-type VLFS considering damage to the breakwater

 A structural safety assessment of a pontoon-type very large floating structure (VLFS) surrounded by a gravity-type breakwater was carried out for extreme wave conditions by considering the damage to the breakwater. Bending and shear collapses are considered to be a failure mode of the floating structure, while overturning damages the breakwater. The probability of the breakwater overturning, and the transmitted wave height before and after damage to the breakwater, are evaluated using design formulae for port and harbor facilities in Japan. The ultimate bending and shear strengths of the floating structure are calculated by the idealized structural unit method (ISUM) and FEM, respectively. The calculated failure probability for the floating structure is compared with the specified target safety level. It was found that the floating structure under consideration is most likely to fail by bending in transverse waves, and that the corresponding failure probability satisfies the target level. Received: September 12, 2002 / Accepted: October 4, 2002 Acknowledgment. The authors are grateful to Dr. Shigeo Ohmatsu, National Maritime Research Institute, Japan, for allowing us to use the program of hydroelastic response analysis. Address correspondence to: M. Fujikubo (e-mail: fujikubo@naoe.hiroshima-u.ac.jp) Updated from the Japanese original, which won the 2002 SNAJ prize (J Soc Arthit Jpn 2002;190:337–345)     

Virtual prototype simulation on underwater hydraulic impingement shovel

The virtual prototype technology is applied to the design of the hydraulic impingement shovel, which is to increase the reliability of the design. The work principle of hydraulic impingement shovel is expatiated, and its dynamic equations are established. The 3D model of virtual prototype is built by PRO/E. Then the couple between the mechanical body of prototype and the hydraulic system is completed by virtue of ADAMS. Finally, the simulation is made on the virtual prototype. The simulation results show that the design of underwater hydraulic impingement shovel is rational. The virtual prototype technology could lay sound foundation of successful manufacturing of physical prototype for the first time and offer highly effective and feasible means for the design and production of underwater equipments.     

An approach to estimating the hull girder response of a ship due to springing

This article describes an estimation method for the hull girder response of a ship due to springing. The linear and nonlinear springing effects on the hull girder are evaluated. Previous studies on the springing response focused mainly on the symmetric response, or vertical response. In this article, however, the springing analysis is extended to asymmetric responses, or horizontal and torsional responses. The Timoshenko beam model was used to calculate the hull girder response and the quadratic strip method was employed to calculate hydrodynamic forces and moments on the hull. To remove irregular frequencies, a rigid lid was adopted on the hull free surface level and hydrodynamic coefficients were interpolated for asymptotic values. Applications to two ships for the symmetric and asymmetric responses were carried out and the effect of springing responses is also discussed.     

A second order volume of fluid （VOF） scheme for numerical simulation of 2-D breaking waves

Among all environmental forces acting on ocean structures and marine vessels, those resulting from wave impacts are likely to yield the highest loads. Being highly nonlinear, transient and complex, a theoretical analysis of their impact would be impossible without numerical simulations. In this paper, a pressure-split two-stage numerical algorithm is proposed based on Volume Of Fluid (VOF) methodology. The algorithm is characterized by introduction of two pressures at each half and full cycle time step, and thus it is a second-order accurate algorithm in time. A simplified second-order Godunov-type solver is used for the continuity equations. The method is applied to simulation of breaking waves in a 2-D water tank, and a qualitative comparison with experimental photo observations is made. Quite consistent results are observed between simulations and experiments. Commercially available software and Boundary Integral Method (BIM) have also been used to simulate the same problem. The results from present code and BIM are in good agreement with respect to breaking location and timing, while the results obtained from the commercial software which is only first-order accurate in time has clearly showed a temporal and spatial lag, verifying the need to use a higher order numerical scheme.     

Multigrid fictitious boundary method for incompressible viscous flows around moving airfoils

In this paper, an efficient multigrid fictitious boundary method (MFBM) coupled with the FEM solver package FEATFLOW was used for the detailed simulation of incompressible viscous flows around one or more moving NACA0012 airfoils. The calculations were carried on a fixed multigrid finite element mesh on which fluid equations were satisfied everywhere, and the airfoils were allowed to move freely through the mesh. The MFBM was employed to treat interactions between the fluid and the airfoils. The motion of the airfoils was modeled by Newton-Euler equations. Numerical results of experiments verify that this method provides an efficient way to simulate incompressible viscous flows around moving airfoils.     

Application of H∞ control in rudder/flap vector robust control of a ship＇s course

Given the uncertainty of parameters and the random nature of disturbances that effect a ships course, a robust course controller should be designed on the basis of rudder/flap vector control. This paper analyzes system uncertainty, and the choice of weighting functions is also discussed. When sea waves operate on a ship, the energy-concentrating frequency varies with the angle of encounter. For different angles of encounter, different weighting functions are designed. For the pole of a nominal model existing in an imaginary axis, the bilinear-transform method is used. The ＂2-Riccati＂ equation is adopted to solve the H∞ controller. A system simulation is given, and the results show that, compared with a PID controller, this system has higher course precision and more robust performance. This research has significant engineering value.     

The ISM Code and the ISPS Code: A critical legal analysis of two SOLAS regimes

Within the comprehensive body of law encompassed by the International Convention on Safety of Life at Sea, 1974 (SOLAS), there are two regimes that are topical and outstanding in the current maritime milieu. These are the international safety management and the international ship and port facility regimes, both characterized by two codes serving as the centre of gravity of each, namely, the ISM Code and the ISPS Code, respectively. In this article the concept of the code as a legal instrument is perused following which a critical legal analysis is carried out of the two above-mentioned Codes, including their backgrounds, the evolutionary process culminating into the regimes and their interrelationships. Several anomalies and inadequacies in the two regimes are identified but in the final analysis it is concluded that both instruments are salutary additions to the body of convention law generated by the International Maritime Organization (IMO). They will undoubtedly influence the continuing development of international law in the field of maritime safety and security.