Effect of Seismic Parameters on the Safety Factor for an Underground Cavern北大核心CSCD

In order to quantitatively evaluate the safety of the surrounding rock of an underground cavern under seis-mic load, a comprehensive evaluation method for the stability of surrounding rock is proposed based on the general safety factor and point safety factor. A calculation method for the general safety factor of a cavern based on the prin-ciple of shear strength reduction of a rock mass is given, the run-through of the plastic zone between the main power-house and main transformer room is presented as a critical criterion for the overall instability of the cavern, and the general safety factor is obtained by searching for the reduction coefficient. A point safety factor calculation method based on the Mohr-Coulomb yield criterion is given. The influence of different seismic input parameters on the general safety factor of the cavern and the point safety factor of key positions are studied based on an underground power-house cavern of a hydropower station in Southwest China. The results show that the quantitative evaluation method for the stability of the surrounding rock based on the safety factor is feasible and can reflect the general safety de-gree and local safety degree of different positions of the cavern for different working conditions. It is found that the general safety factor of the cavern and the point safety factor of key positions decrease with an increase of the ampli-tude and duration of a seismic wave while they increase with an increase of the incident angle; additionally, the low frequency of a seismic wave has a great influence on the cavern while the high frequency has little effect. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Bicycle mode share in China: a city-level analysis of long term trends

In the past 15 years, cities in China have experienced big changes in socioeconomic and traffic conditions, resulting in a long term change in bicycle use. This study aims to quantify the changes in bicycle mode share in Chinese cities and explore the potential causes. Based on data from 51 cities, it is found that bicycle mode share at the city level decreased gradually in the past. Conventional bicycle mode share decreased with a rate of 3 % per year, but electric bicycle mode share increased with a rate of 2 % per year. The correlations between city features such as demographics and built environments and bicycle mode share at different city sizes are compared. The generalized linear models are estimated to relate the changes in the share of different trip modes to various city-level factors. The results show that the bicycle mode share in a city is impacted by factors including city area size, population density, number of cars, percentage of local road mileage among all roads, and trip purpose. Possible reasons for the changes in bicycle uses in Chinese cities are explored and policy implications are discussed.     

隧道照明节能控制系统研究

综合考虑交通量、环境亮度、行车速度、地理环境等因素,基于隧道照明设计与控制的"全局优化"理念,采用"多模式、多等级、智能化、个性化"的控制策略,开发了能够根据公路隧道内外亮度、照度、车流量、车流特点等环境变换因素,自动进行反馈调整隧道内部照明的智能照明控制系统。估算比对同一隧道在使用节能智能控制系统前后年总能耗可知,与原有控制方案相比,节能智能控制系统综合节电30%。     

BFL-RS01改性剂在OGFC混合料中的路用性能研究

本文探讨了国产70#沥青、进口70#沥青、BFL-RS01改性剂、SBS改性沥青改性OGFC混合料性能。研究国产沥青和进口沥青分别与BFL-RS01改性剂复配改性OGFC混合料性能,并与SBS改性OGFC混合料性能对比。结果表明,采用BFL-RS01改性OGFC混合料可以提高OGFC混合料的综合路用性能,耐高温性、抗水损害性要比SBS改性OGFC混合料更加优秀。     

陆域口岸项目施工阶段BIM技术应用

根据BIM技术的特点,以某陆域口岸项目为工程背景,介绍了BIM技术在该项目施工全过程的主要应用点与技术成果。该项目全面使用BIM技术,为项目施工全过程提供有力的技术支撑,确保了工程施工质量、降低施工风险,使得项目安全可靠完成,并为今后类似项目在施工全过程使用BIM技术积累了丰富的经验。最后,对项目未来运维阶段的BIM技术运用指出了研究方向。     

多模块连接半潜式平台稳性对比分析

为开发我国海洋丰富的渔业、油气和旅游资源,可以在指定海域布设超大型浮式结构物,作为综合保障基地,提供船舶停靠、人员居住、渔业加工、油气开发、环境监测、飞机起降等多种功能.考虑到建造、运输等因素,超大型浮式结构物一般由多个相同或相似模块连接组成.本文基于一型半潜式平台模块,分别开展单、双、三模块的稳性分析,并对其稳性分析结果进行对比分析,探讨模块数量对平台稳性的影响,为超大型浮式结构物的后续设计与运营提供参考.     

基于几何平均数的风光互补发电系统MPPT控制策略研究

根据风光互补发电系统的输出特性,研究了一种基于几何平均数的最大功率跟踪控制策略。首先,利用风力和光伏发电系统MPPT分别计算出下一时刻的电压占空比,然后利用几何平均数求出两个占空比的平均值。其次,用所求平均值控制风光互补发电系统的输出电压,从而保证风光互补发电系统工作在最大功率点。最后,通过MATLAB/Simulink进行了仿真分析,其结果验证了控制策略的有效性。     

台风"莎莉嘉"过境期间某泻湖内波浪特征分析

通过在某岛礁泻湖内布置ADCP波流测量仪器,采集到2016年21号台风"莎莉嘉"期间的波浪数据.结合布置在泻湖口处风速仪的风实测数据,本文对该时间段内的波浪特征进行分析.由波浪统计数据分析发现有义波高随时间的变化趋势与风速的变化趋势高度重合;谱峰周期的变化则要晚于风速的变化;谱峰方向在台风起主导作用期间与风向高度一致.通过分析多个无因次参数以及对风浪和涌浪进行分离发现测点与台风中心距离开始变大的这个时间点有着重要的意义.在该时间点,波长开始变长,波浪由无限水深波浪转变为有限水深波浪.一些波浪特征值,比如谱峰周期、a/L,也发生比较大的变化.此后在七级风半径不再覆盖测点时,该处波浪由风浪转变为涌浪.对波浪谱进行分析发现,在台风主导期间,其谱为单峰谱,其余时间则为双峰谱.     

科研院所科技创新工作简析

本文立足于国内科研院所科技创新现状,指出了科研院所科技创新的特点,阐述了科研院所科技创新的内涵,论述了科研院所科技创新的问题,提出了科研院所科技创新的方法。     

Response-based analysis for Tension Leg Platform

The typical industry practice for Tension Leg Platform (TLP) design focuses on a conventional short-term design recipe, which assumes that an N-year design environment leads to an N-year response. In the response-based design method, the TLP is designed to withstand N-year responses rather than respond to N-year environmental conditions. In this paper, we present an overview and a general procedure for the response-based design method and use a case study to compare the critical TLP responses between the two methods. The results of our comparison show that the conventional short-term design method often contains an element of conservatism and that the response-based design method can reduce the design conditions and thereby achieve cost savings.