Effect of Seismic Parameters on the Safety Factor for an Underground Cavern北大核心CSCD

In order to quantitatively evaluate the safety of the surrounding rock of an underground cavern under seis-mic load, a comprehensive evaluation method for the stability of surrounding rock is proposed based on the general safety factor and point safety factor. A calculation method for the general safety factor of a cavern based on the prin-ciple of shear strength reduction of a rock mass is given, the run-through of the plastic zone between the main power-house and main transformer room is presented as a critical criterion for the overall instability of the cavern, and the general safety factor is obtained by searching for the reduction coefficient. A point safety factor calculation method based on the Mohr-Coulomb yield criterion is given. The influence of different seismic input parameters on the general safety factor of the cavern and the point safety factor of key positions are studied based on an underground power-house cavern of a hydropower station in Southwest China. The results show that the quantitative evaluation method for the stability of the surrounding rock based on the safety factor is feasible and can reflect the general safety de-gree and local safety degree of different positions of the cavern for different working conditions. It is found that the general safety factor of the cavern and the point safety factor of key positions decrease with an increase of the ampli-tude and duration of a seismic wave while they increase with an increase of the incident angle; additionally, the low frequency of a seismic wave has a great influence on the cavern while the high frequency has little effect. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

A Delphi analysis on green performance evaluation indices for ports in China

This study identified a set of applicable and practical green performance evaluation indices for Chinese ports using the Delphi technique. The research was conducted by targeting three representative Chinese ports in Eastern China: the Shanghai Port, Ningbo Port, and Qingdao Port. An effective expert panel was structured with direct stakeholders related to green performance, which was based on a sufficient consideration of the unique and the special decision-making system for Chinese ports. Twenty-one green performance indices in six dimensions (i.e. liquid pollution management, air pollution management, noise control, low carbon regulations and energy savings, marine biology preservation, and organization and management) were eventually identified through three rounds of iterations. The identified green performance indices for Chinese ports are highly consistent with the Chinese Government’s environmental policies. Compared with European ports, the green port performance indicators in China are not as comprehensive. The indicators that are strictly consistent with national macro policies and the factors that are more easily seen, heard, and felt were perceived to be more important. From an academic perspective, this study offers a new approach for system establishment and green practice criteria exploration and thus provides a significant basis for further green port studies.     

感应电机矢量控制系统的建模与仿真研究

为了研究异步感应电机矢量控制系统动态性能,利用Matlab/Simulink建立了基于电压空间矢量脉宽调制(SVPWM)的感应电机矢量控制模型,并对电机的启动性能以及负载为阶跃输入情况进行了仿真分析。仿真结果表明所构建的系统模型动态过程符合实际调速系统运动过程。     

基于HHT和BP神经网络的船舶电力系统故障定位

针对船舶电力系统故障难以精确定位的情况,将Hilbert-Huang变换(HHT)和BP神经网络应用于船舶电力系统故障节点定位。首先,采集各节点电流信号,经过EMD分解得到若干IMF分量,对第一个IMF分量进行Hilbert变换得到其瞬时振幅向量。然后,将各节点的瞬时振幅向量之和作为电流信号的特征量输入到带有动量因子的BP神经网络中进行训练,利用训练好的神经网络进行故障节点定位。最后,通过仿真实验验证了所提方法的有效性。     

永磁同步电机直接转矩控制的建模与仿真研究

为了研究永磁同步电机直接转矩控制系统的动态性能,利用Matlab/Simulink建立了永磁同步电机直接转矩控制模型,并对电机的启动性能以及负载为阶跃输入情况进行了仿真分析,仿真结果表明所构建的系统模型动态过程符合实际调速系统运动过程。     

Bicycle mode share in China: a city-level analysis of long term trends

In the past 15 years, cities in China have experienced big changes in socioeconomic and traffic conditions, resulting in a long term change in bicycle use. This study aims to quantify the changes in bicycle mode share in Chinese cities and explore the potential causes. Based on data from 51 cities, it is found that bicycle mode share at the city level decreased gradually in the past. Conventional bicycle mode share decreased with a rate of 3 % per year, but electric bicycle mode share increased with a rate of 2 % per year. The correlations between city features such as demographics and built environments and bicycle mode share at different city sizes are compared. The generalized linear models are estimated to relate the changes in the share of different trip modes to various city-level factors. The results show that the bicycle mode share in a city is impacted by factors including city area size, population density, number of cars, percentage of local road mileage among all roads, and trip purpose. Possible reasons for the changes in bicycle uses in Chinese cities are explored and policy implications are discussed.     

Direct formulation and algorithms for the probit-based stochastic user equilibrium traffic assignment problem

This paper proposes simple and direct formulation and algorithms for the probit-based stochastic user equilibrium traffic assignment problem. It is only necessary to account for random variables independent of link flows by performing a simple transformation of the perceived link travel time with a normal distribution. At every iteration of a Monte-Carlo simulation procedure, the values of the random variables are sampled based on their probability distributions, and then a regular deterministic user equilibrium assignment is carried out to produce link flows. The link flows produced at each iteration of the Monte-Carlo simulation are averaged to yield the final flow pattern. Two test networks demonstrate that the proposed algorithms and the traditional algorithm (the Method of Successive Averages) produce similar results and that the proposed algorithms can be extended to the computation of the case in which the random error term depends on measured travel time.     

路面热再生技术在养护施工中的推广意义

本文通过对公路养护工程具体施工方式的研究,简明扼要的分析了热再生技术在施工现场的施工方式。大量工程实际经验总结得出,路面的现场热再生技术可以大大提高原有路面沥青材料的利用率,提高经济效益的同时,资源得到了重复利用,且由于热再生技术在施工时,不会对环境造成影响,故而该技术的推广更有利于环保。     

隧道照明节能控制系统研究

综合考虑交通量、环境亮度、行车速度、地理环境等因素,基于隧道照明设计与控制的"全局优化"理念,采用"多模式、多等级、智能化、个性化"的控制策略,开发了能够根据公路隧道内外亮度、照度、车流量、车流特点等环境变换因素,自动进行反馈调整隧道内部照明的智能照明控制系统。估算比对同一隧道在使用节能智能控制系统前后年总能耗可知,与原有控制方案相比,节能智能控制系统综合节电30%。     

BFL-RS01改性剂在OGFC混合料中的路用性能研究

本文探讨了国产70#沥青、进口70#沥青、BFL-RS01改性剂、SBS改性沥青改性OGFC混合料性能。研究国产沥青和进口沥青分别与BFL-RS01改性剂复配改性OGFC混合料性能,并与SBS改性OGFC混合料性能对比。结果表明,采用BFL-RS01改性OGFC混合料可以提高OGFC混合料的综合路用性能,耐高温性、抗水损害性要比SBS改性OGFC混合料更加优秀。