沉管隧道预制管节顶推滑移系统摩擦试验研究

为了针对某大型沉管隧道预制管节的顶推滑移系统选择合适的摩擦面材料,文章对该顶推滑移系统的四组拟采用摩擦面材料(不锈钢板-PTFE、不锈钢板-NGE、普通钢板-PTFE、普通钢板-NGE)进行了静、动态摩擦系数测试。利用20 000 k N压剪试验机、采用双剪法进行了模拟测试试验。试验结果表明:(1)四组被测试摩擦面的摩擦系数中,不锈钢板与PTFE板的最小,普通钢板与PTFE板的最大;(2)锂基润滑油和水对减小不锈钢板与PTFE板之间的静、动摩擦系数效果都十分明显,但锂基润滑油对摩擦系数的减小效果会随着油层被挤压变薄而逐渐减弱。该试验结果为该顶推滑移系统的摩擦面材料选择以及摩擦面润滑处理措施提供了重要参考依据。     

浅析内河航道节能现状及技术应用

内河航道在施工建设和运营管理期间会产生大量的能源消耗,抓好航道的节能减排对发展绿色交通具有重要作用。本文总结概况了目前我国内河航道节能减排现状及采用的关键技术,相关技术的推广将引导交通运输行业优化用能结构、促进产业协调发展。     

Tradeoffs among free-flow speed, capacity, cost, and environmental footprint in highway design

This paper investigates differentiated design standards as a source of capacity additions that are more affordable and have smaller aesthetic and environmental impacts than modern expressways. We consider several tradeoffs, including narrow versus wide lanes and shoulders on an expressway of a given total width, and high-speed expressway versus lower-speed arterial. We quantify the situations in which off-peak traffic is sufficiently great to make it worthwhile to spend more on construction, or to give up some capacity, in order to provide very high off-peak speeds even if peak speeds are limited by congestion. We also consider the implications of differing accident rates. The results support expanding the range of highway designs that are considered when adding capacity to ameliorate urban road congestion.     

Vulnerability analysis for large-scale and congested road networks with demand uncertainty

To assess the vulnerability of congested road networks, the commonly used full network scan approach is to evaluate all possible scenarios of link closure using a form of traffic assignment. This approach can be computationally burdensome and may not be viable for identifying the most critical links in large-scale networks. In this study, an “impact area” vulnerability analysis approach is proposed to evaluate the consequences of a link closure within its impact area instead of the whole network. The proposed approach can significantly reduce the search space for determining the most critical links in large-scale networks. In addition, a new vulnerability index is introduced to examine properly the consequences of a link closure. The effects of demand uncertainty and heterogeneous travellers’ risk-taking behaviour are explicitly considered. Numerical results for two different road networks show that in practice the proposed approach is more efficient than traditional full scan approach for identifying the same set of critical links. Numerical results also demonstrate that both stochastic demand and travellers’ risk-taking behaviour have significant impacts on network vulnerability analysis, especially under high network congestion and large demand variations. Ignoring their impacts can underestimate the consequences of link closures and misidentify the most critical links.     

偏压连拱隧道施工方法研究

文章采川三维有限元数值模拟研究了偏压连拱隧道不同施工顺序下拱顶下沉、中墙稳定性及初期支护受力特征.研究结果表明,先开挖浅埋侧时,拱顶沉降较小,中墙在施工中的稳定安全系数较大、弯矩较小,初期支护受力较大;对于浅埋偏压连拱隧道,围岩变形及中墙在施工中的稳定性控制更为重要.所以,从有利于围岩变形、中墙稳定性控制以及中墙受力的角度出发,宜采用先开挖浅埋侧的施工方法.     

等截面、等量排风管道静压分布和风口开度计算

本文详细介绍了等截面多风口等量排风长管道内压力分布基本式理论推导和风口开度调节计算方法,并根据实际地下工程测定数据验证其理论计算可靠性,可以供地下工程设计计算和工程调试中作借鉴和参考。     

地铁暗挖隧道二次衬砌施工质量控制浅析

文章根据深圳轨道交通二期工程安托山站—侨香站暗挖区间的二次衬砌施工经验,分析了地铁暗挖隧道二次衬砌施工质量的影响因素以及二次衬砌施工过程中容易发生的质量问题,并提出了具体的控制措施。通过经验总结,使地铁施工的管理、质量控制、施工通病防治上升一个台阶。     

富水砂层中暗挖隧道施工沉降控制技术

富水砂层中暗挖隧道施工是地铁施工中的一大难点,常常因沉降过大而引发安全事故。在深圳地铁安-侨区间隧道工程中,通过洞内帷幕注浆、水平旋喷桩、地表井点降水等辅助措施做到了超前控制,在解决隧道开挖安全问题的同时有效地减少了沉降量;施工过程中严格执行了"管超前、短进尺、强支护、早封闭、勤量测"的方针,控制了时空效应,解决了富水砂层中暗挖隧道沉降过大的问题。文章重点分析了沉降原因及控制沉降的关键技术和有效措施。     

光面爆破技术在城市地铁隧道施工中的应用

文章从光面爆破机理、光面爆破技术中各主要参数的确定,以及光面爆破在实际工程中的应用几个方面出发,以深圳地铁安-侨区间隧道硬岩段施工为例,研究分析了如何利用光面爆破技术来提高城市地铁浅埋暗挖法的光爆效果,特别是近距离穿越重要建(构)筑物时如何有效进行光面爆破。     

近接桩基盾构隧道施工管片力学行为研究

盾构隧道衬砌管片在施工阶段处于复杂的受力状态,易出现局部破损现象。文章以深圳地铁5号线近接桩基时盾构隧道施工为研究背景,通过现场测试对衬砌所承受的轴力和弯矩进行了分析,以此来探究盾构隧道管片的力学特性。研究结果表明:上覆建筑物的全风化花岗岩层中,管片脱出盾尾后桩基荷载将传递给隧道上部土体,最后传递至衬砌管片,管片环受到较大的附加应力作用;管片刚拼装上时试验环内力较小;当管片脱出盾尾时其内力达到最大值;稳定后的管片内力一般相较刚脱出盾尾时稍小。由于岩层破碎且极度发育,透水性好,孔隙水压力变化速度较快,且能较快趋于稳定。