“三图四表”管理制度在轨交基坑施工中的应用

结合宁波轨交1号线一期工程TJ-Ⅷ标东环南路站工程,参建单位对基坑结构风险进行了静态分析与评估,并对基坑设计方案进行了优化。在基坑开挖过程中,通过"三图四表"管理制度对基坑开挖过程进行动态实时的控制,采取了一系列针对基坑变形的控制措施,顺利完成了该站主体基坑的开挖作业。可供欠固结土地区深基坑的设计和施工参考。     

不锈钢车体钝化工艺研究

针对轨道交通车辆在制造过程中,不锈钢车体表面的钝化膜因机加工、焊接等因素可能遭到破坏,导致不锈钢车体防腐能力下降的情况,详细介绍了不锈钢车体的钝化原理、钝化工艺及钝化效果的检测方法。经过柠檬酸钝化液钝化处理后,可有效去除车体表面游离铁和其他杂质,车体表面颜色均匀一致,提高了不锈钢车体的耐蚀性和美观性。     

两种跨平台航迹精度测评方法研究

跨平台航迹精度测评对多平台协同使用传感器航迹数据具有指导意义,论文介绍了相对于本平台距离/方位的测评方法(方法一)和空间距离精度的测评方法(方法二),从非线性坐标变换的角度分析了本平台位置对测评结果的影响,其中方法一的计算结果在两平台位置相差不大的情况下主要受被探测目标相对于这两个平台的方位角度差影响,方法二的计算结果则不受本平台位置的影响,因而后者更有意义。     

泥浆悬浮砂粒能力分层测定试验研究

为实现泥浆悬浮砂粒能力的量化分析,提出一种分层测定方法,选取12%、15%和18%3种质量分数的试验泥浆,通过自行设计的分层取样装置进行试验研究,获取不同泥浆质量分数、沉降时间和砂粒粒径条件下的10个深度分段的砂粒质量分布,分析各参数影响下的砂粒沉降变化规律。结果表明:1)该分层测定方法可较好地获取不同深度分段的砂粒质量,弥补现有测定方法只能获取底层砂粒沉降质量的不足;2)试验所采用的3种质量分数的泥浆对0.1 mm以上粒径的砂粒悬浮能力均较差。根据砂粒沉降曲线分布特征,提出一种用于判别泥浆悬浮砂粒能力的方法,即砂粒沉降曲线越平缓,各层质量差异性越小,底层质量无明显拐点,不同沉降时间曲线越紧密,则泥浆悬浮砂粒能力越强。     

Occupant injury risk analysis at NASS/CDS database

Injury information for vehicle occupants from the body regions of the head, thorax, abdomen, and upper and lower extremities, due to the restraints and interior parts of the vehicle, were extracted from the 2009 ~ 2012 NASS/CDS database. For those cases with high occurrence frequency, a detailed and comprehensive data analysis was performed to find the relationship between the accident, occupant, vehicle, and injury data. A numerical frontal impact sled model with the Hybrid III dummy and the GHBMC human body model was constructed to simulate and identify those injury risks according to NASS/CDS. Among the 5,734 injuries to the aforementioned body regions from frontal crashes are, listed by frequency of occurrence, the lower extremity (27.8 %), upper extremity (21.3 %), thorax (15.1 %), face (10.9 %), spine (8.7 %), head (7.3 %), and abdomen (6.9 %). The main injury sources to the head were the windshield, side structure, and steering wheel. For the thorax and abdomen they were the seat belt and steering wheel. For the lower extremity it was the instrument panel. The main injury patterns for the head were the concussion and the contusion. For the thorax they were vessel laceration and lung contusion. For the abdomen they were laceration and contusion of the organs. For the lower extremity they were bone fracture and ligament rupture. The steering wheel and seat positions were main factors affecting head and thorax injury risks. From the sled impact simulation, high injury risks of the head and thorax were assessed respectively at conditions of steering column tilt down and rear most seat position, which correlated well with the findings from the NASS/CDS data analysis.     

Integrated approach to an optimal automotive timing chain system design

Ensuring engine efficiency is a crucial issue for automotive manufacturers. Several manufacturers focus on reducing the time taken to develop and introduce brand new vehicles to the market. Thus, a synergic approach including various simulations is generally adopted to achieve a development schedule and to reduce the cost of physical tests. This study involved proposing a design process that is very useful in the preliminary development stage through effective support from simulations. This type of simulation-based design process is effective in developing timing chain drives; the use of this process, based on results from multiple trials, showed improvements in performance including low friction and vibration, improved durability, and cost-effective part design when compared to conventional processes. This study proposes an integrated approach to the preliminary design of an automotive timing chain system. The approach involves structural and dynamic analyses. The details of the design process are described by using the case of a virtual engine. This study conducted and summarized a dynamic and structural analysis as well as topological optimization to describe a process to obtain optimal results. The results of this study indicated the following improvements in overall performance factors: 12.1 % improvement in transmission error, 10.1 % reduction in chain tension, 46 % reduction in tensioner arm weight, and 11 % reduction in transversal displacement.     

某深基坑开挖数值模拟与实测对比分析

通过FLAC3D对现场工况进行了开挖模拟,与实测结果进行了对比分析。围护结构型式采用单排桩+锚索和双排桩,开挖到坑底时,计算的桩身水平位移最大值分别为8.73 mm和10.19 mm,实测值分别为10.57 mm和12.05 mm,实测值稍大于计算值,桩身整体侧向变形规律一致。围护结构型式采用单排桩+锚索,不同开挖阶段坑外地表沉降的计算值与实测值对比,整体沉降均随着开挖深度增加而增大;沿基坑方向的分布规律也大致相同,都是呈凹槽型分布,最大沉降值出现在距桩后3~4 m范围内。     

掺锶磷酸钙骨水泥的体外细胞生物学性能评价及其与掺锶量的相关性

目的 评价"SrHPO4/Ca4(PO4)2O/CaHPO4"系掺锶磷灰石骨水泥的生物相容性及其与掺锶量的关系.方法 通过急性全身毒性、热原性、溶血性、体外细胞毒性以及成骨细胞在材料表面的黏附、增殖与表达等实验,检测材料的性能及生物降解潜能.结果 "SrHPO4/Ca4(PO4)2O/CaHPO4"系掺锶磷灰石骨水泥的急性全身毒性、热原性、溶血性、体外细胞毒性均为合格.Sr-CPC的热原性、溶血性以及碱性磷酸酶值与掺锶量呈非线性关系.结论 含锶磷酸钙骨水泥体外细胞生物相容性良好,是安全的新型骨组织工程支架材料.     

2型糖尿病患者一级亲属正常糖代谢人群胰岛素抵抗分析

目的探讨2型糖尿病(T2DM)患者糖耐量正常的一级亲属胰岛β细胞功能及胰岛素抵抗情况,并分析胰岛素抵抗的相关因素。方法选取T2DM患者糖耐量正常的一级亲属63例,根据胰岛素抵抗指数分为胰岛素抵抗组及非抵抗组;选取30例健康体检者作为正常对照组。对所选的93例对象进行血压、血糖、胰岛素、血脂的测定,并计算稳态模型胰岛素抵抗指数(HOMA-IR)及胰岛β细胞功能指数(HOMA-β)。结果①糖尿病患者一级亲属组与对照组相比,胰岛素水平、HOMA-IR、HOMA-β明显升高(P<0.05);②胰岛素抵抗组体质指数、舒张压、甘油三酯、餐后血糖、HOMA-β明显高于胰岛素非抵抗组(P<0.05);③相关分析示胰岛素抵抗与体质指数、舒张压、甘油三酯、餐后胰岛素呈正相关(P<0.01,P<0.05),与空腹血糖、餐后血糖、空腹胰岛素、收缩压、胆固醇无显著相关性(P>0.05)。结论T2DM患者一级亲属存在胰岛β细胞代偿性的高分泌,早期已经出现胰岛素敏感性的下降和胰岛素抵抗。胰岛素抵抗与体重增加、舒张压升高及甘油三酯的升高有关。提示对糖尿病患者一级亲属应严格控制体重、血压及血脂,对减少T2DM具有积极意义。     

兔眼环孢霉素A缓释微球的眼内释药性研究

目的建立兔眼房水中环孢霉素A缓释微球的高效液相测定方法,考察在不同给药剂量下兔眼房水中的药物代谢特性,为该药预防后发性白内障提供理论依据。方法兔眼行晶体囊外摘除,左眼前房及囊袋内注射环孢素微球,右眼给予空白微球作对照,采用高效液相色谱法监测给药后4周内兔眼房水中环孢霉素A的浓度。色谱柱为反相C18硅胶柱,柱温为60℃,流动相为乙腈-水(67∶33),检测波长210nm。结果兔眼房水中环孢霉素A的浓度在0.13-1.25mg/L范围内呈良好线性关系(r=0.9951),最低检测浓度0.13mg/L,回收率95.91%,日间和日内精密度均小于5.0%。缓释微球的释药速率适中,兔眼前房给药后可在2周内维持较高浓度,高低两种给药剂量下,环孢霉素A的吸收半衰期(t1/2Ka)和血浆清除速率(CL)经检验无统计学差异,药时曲线下面积(AUC)和峰浓度(Cmax)与剂量之间线性相关。结论环孢素A缓释微球在兔眼内有较高的生物利用度,实验期内可达到抑制后发性白内障的有效浓度。