Design and evaluation of an integrated inventory and transportation system

This paper proposes the adoption of an integrated inventory and transportation system (IITS) to minimize the total costs of inventory and transportation. A non-linear programing is developed by analyzing transportation and inventory costs with one supplier and many retailers in the distribution environment. The paper compares the proposed model with the traditional approach in computing total costs with numerical data. The results indicate that the total costs can be optimized by adopting integrated programing rather than the traditional approach, along with achieving improved customer service levels. In particular, sensitivity analysis is applied to determine the performance of the IITS under various transportation costs, holding costs and shortage costs. It shows that the transportation cost per unit is most sensitive in the proposed model. In this situation, the IITS is more effective for cost saving when set-up cost, holding and shortage costs are high, but is less effective for situations involving high per-unit transportation costs.     

Isolating high-priority metro and feeder bus transfers using smart card data

Fixed-rail metro (or ‘subway’) infrastructure is generally unable to provide access to all parts of the city grid. Consequently, feeder bus lines are an integral component of urban mass transit systems. While passengers prefer a seamless transfer between these two distinct transportation services, each service’s operations are subject to a different set of factors that contribute to metro-bus transfer delay. Previous attempts to understand transfer delay were limited by the availability of tools to measure the time and cost associated with passengers’ transfer experience. This paper uses data from smart card systems, an emerging technology that automatically collects passenger trip data, to understand transfer delay. The primary objective of this study is to use smart card data to derive a reproducible methodology that isolates high priority transfer points between the metro system and its feeder-bus systems. The paper outlines a methodology to identify transfer transactions in the smart card dataset, estimate bus headways without the aid of geographic location information, estimate three components of the total transfer time (walking time, waiting time, and delay time), and isolate high-priority transfer pairs. The paper uses smart card data from Nanjing, China as a case study. The results isolate eight high priority metro-bus transfer pairs in the Nanjing metro system and finally, offers several targeted measures to improve transfer efficiency.     

One city,three models: comparison of land‐use/transport policy simulation models for Dortmund

The paper reports on simulation experiments conducted by the International Study Group on Land‐Use/Transport Interaction (ISGLUTI) for the metropolitan region of Dortmund in the Federal Republic of Germany. Three land‐use/transport simulation models were applied to the Dortmund region: the DORTMUND model developed at the University of Dortmund, the LILT model being used at University College London and the MEPLAN package developed by Marcial Echenique & Partners in Cambridge. The three models are briefly characterized and their ex‐post forecasts are compared with the actual development of the region. The final section of the paper compares how the three models respond to a common set of assumptions and policies from the fields of land‐use control, traffic management and transport investment. The differences in model response give insights into the validity of the theoretical foundations and internal structure of the models.     

Public/private-sector cooperation in urban transportation: Lessons from ridesharing experiences in Connecticut

An important characteristic of urban transportation policy and planning today is the increasing role that the private sector is playing in identifying and implementing transportation projects. For example, a recent examination of the possible forms of such involvement found that there were four major categories of action that could be used to classify recent private-sector efforts in urban transportation: (1) aid to and/or provision of transportation services; (2) formation of advocacy or advisory groups whose purpose is to influence public policy; (3) sponsorship of transportation studies; and (4) provision of management assistance to public agencies (Gordon, 1982). In many of these efforts, the successful implementation of a project or program required close cooperation between public and private-sector officials. The purpose of this paper is to examine the characteristics of this interaction and explore the implications for transportation planning and policy.Examples of public/private-sector interaction in two Connecticut cities, Hartford and Stamford, are used to illustrate the characteristics of successful transportation program implementation. Although the examples are limited to two cities, and are mainly concerned with one major category of action (ridesharing), the characteristics of the process used and of the results can be applied to other situations where public/privatesector interaction is desired.     

Parking policy and urban goals: Linking strategy to needs

Parking management strategies have traditionally been used as a means of accommodating traffic demand, with little or no effort made to identify how such strategies might relate to other urban objectives. In this paper, parking management strategies are classified according to the control they exert over the amount of aggregate parking supply, access to parking, spatial distribution of parking supply, or dollar price of parking. Six general categories of urban policy objectives are identified, and the relationship between parking strategies and these objectives analyzed. The parking program in Baltimore is used to illustrate some of the relationships identified in this analysis. This paper concludes that the linkage between parking and the attainment of some urban objectives is potentially quite strong, and that further empirical research is needed to fully establish this relationship. Several different directions for further research are also identified.     

Further evidence on the temporal stability of disaggregate travel demand models

Current evidence on the transferability of disaggregate travel demand models is inconclusive. Adding to this body of research, the present analysis focuses upon the temporal characteristics of work trip behavior in the San Francisco Bay Area. Using before and after data sets associated with the BART Impact Travel Study, multinomial logit models of work trip modal choice are estimated. The results indicate that the general form and the coefficient estimates of a pre BART model are transferable in time. Moreover, when updated to reflect BART's presence, the model's predictive success and its implied elasticity measures are generally accurate, relative to those implied by reestimating the entire model on post BART data. Finally, as economic theory would predict, elasticity measures of the service related variables were found to increase over time.     

基于车激动力响应互相关指标的桥梁基础冲刷诊断方法

针对当前桥梁基础冲刷诊断和检测方法过程复杂、成本高且受环境影响大等问题,提出一种基于车激动力响应互相关指标的桥梁基础冲刷诊断方法。该方法通过桥墩和桥跨不同测点的纵向加速度响应自由衰减段信号的互相关分析,建立基础冲刷诊断指标体系,实现冲刷定位和均匀性诊断。首先,依据互相关函数幅值向量置信度判据指标进行基础冲刷初判;然后,通过响应互相关函数幅值向量因子变化率向量进行冲刷定位,再根据横桥向互相关函数幅值变化率向量诊断冲刷均匀性;并通过统计评估方法提高诊断精度;最后,结合1座连续梁桥算例进行多种冲刷工况的数值仿真分析,对所提方法的有效性和适用性进行验证。结果表明：该方法能够很好地实现基础冲刷的定位和均匀性诊断,指标具有较高敏感性;同时具有较好的抗噪性能,通过所提出诊断指标体系的综合使用可消除噪声对诊断结果的干扰。该方法具有诊断结果精度高、过程简便易行、无需进行复杂且误差较大的模态识别、允许试验测试参数和条件适量变化等优点,可嵌入常规桥梁荷载试验同步开展,具有很好的工程应用潜力和实用价值。     

Evasive manoeuvres with a steering robot

In the pursuit of an objective rating on vehicle stability performance, it is always desirable to reduce disturbances and inconsistencies during experimental evaluations, especially the ones introduced by human drivers. This paper presents the development of a steering robot designed for closed-loop steering tasks during evasive manoeuvres. It describes the controller structure and discusses experimental results, in addition to simulation/vehicle model verifications and theoretical control analysis.     

Plate scanning tools to obtain travel times in traffic networks

The management of vehicle travel times has been shown to be fundamental to traffic network analysis. To collect travel time measurement, some methods focus solely on isolated links or highway segments, and where two measurement points, at the beginning and at the end of a section, are deemed sufficient to evaluate users' travel time. However, in many cases, transport studies involve networks in which the problem is more complex. This article takes advantage of the plate scanning technique to propose an algorithm that minimizes the required number of registering devices and their location in order to identify vehicles candidates to compute the travel times of a given set of routes (or subroutes). The merits of the proposed method are explained using simple examples and are illustrated by its application to the real network of Ciudad Real.     

Vehicle response-based track geometry assessment using multi-body simulation

The assessment of the geometry of railway tracks is an indispensable requirement for safe rail traffic. Defects which represent a risk for the safety of the train have to be identified and the necessary measures taken. According to current standards, amplitude thresholds are applied to the track geometry parameters measured by recording cars. This geometry-based assessment has proved its value but suffers from the low correlation between the geometry parameters and the vehicle reactions. Experience shows that some defects leading to critical vehicle reactions are underestimated by this approach. The use of vehicle responses in the track geometry assessment process allows identifying critical defects and improving the maintenance operations. This work presents a vehicle response-based assessment method using multi-body simulation. The choice of the relevant operation conditions and the estimation of the simulation uncertainty are outlined. The defects are identified from exceedances of track geometry and vehicle response parameters. They are then classified using clustering methods and the correlation with vehicle response is analysed. The use of vehicle responses allows the detection of critical defects which are not identified from geometry parameters.