基于船模的木京扩建船闸通航水流条件试验研究

针对木京枢纽扩建船闸通航条件较为复杂的问题,对其上、下游引航道推荐方案的通航安全性进行试验论证研究。在水工模型试验的基础上,利用自航小尺度船模技术,观测分析船闸上、下游引航道在不同流量下的舵角、航速等通航参数。结果表明,在Q≥3 900 m~3/s时,上、下游引航道均有通航参数超过相应限值,难以保障通航安全。上、下游引航道的航行难点分别在于横流较大的转弯段和导墙末端,且均表现为进闸难度大于出闸难度。综合试验成果进行定量和定性分析,提出船闸最高限制通航流量为3 000 m~3/s,为工程优化设计及后期运行提供了科学可靠的数据基础。     

船船水动力相互作用的CFD分析研究（英文）

A numerical study of ship-to-ship interaction forces is performed using a commercial CFD code, and the results are compared with experimental data and with the results of a panel method analysis. Two ship models have been used in the interaction forces analysis: a tug and a tanker, advancing parallel to each other with different lateral distances and two different values of the fluid depth. Computations are carried out with four different flow models: inviscid and viscous flow with the free surface modeled as a rigid wall and inviscid and viscous flow with the deformable free surface. A fair agreement was obtained with available experimental data and results obtained by panel method. The influence of viscosity in the computations is found to be comparatively weak, while the wavemaking effects may be important, at small magnitude of the horizontal clearance.     

Air itinerary shares estimation using multinomial logit models

ABSTRACT

The main goal of this study is the development of an aggregate air itinerary market share model. In order to achieve this, multinomial logit models are applied to distribute the city-pair passenger demand across the available itineraries. The models are developed at an aggregate level using open-source booking data for a large group of city-pairs within the US air transport system. Although there is a growing trend in the use of discrete choice models in the aviation industry, existing air itinerary share models are mostly focused on supporting carrier decision-making. Consequently, those studies define itineraries at a more disaggregate level using variables describing airlines and time preferences. In this study, we define itineraries at a more aggregate level, i.e. as a combination of flight segments between an origin and destination, without further insight into service preferences. Although results show some potential for this approach, there are challenges associated with prediction performance and computational intensity.     

Application of Chinese Characters in the Design and Construction of the Badaling Great Wall Station of the Beijing-Zhangjiakou High-Speed Railway北大核心CSCD

The new Badaling tunnel is the longest tunnel on the under-construction Beijing-Zhangjiakou highspeedrailway, with the Badaling Great Wall station to be built in the tunnel. This station, which is under the Badaling Great Wall historic site, is the world’s largest underground high-speed railway station with the most complicated structure and the largest overburden and excavation area. It is therefore a representative project for China’s highspeed railway development strategy, supporting infrastructure facilities for the Beijing Horticultural Expo 2019 and the 2022 Winter Olympics in Beijing, and it is important that it be of high quality and completed safely. In the de-sign and construction of the station, the glyphs of the Chinese characters of "中",”国”,”人”and”品”are used, re-spectively, along the station route, in the rescue and evacuation mode, auxiliary adit and partial excavation, which is a way to successfully integrate the art of Chinese characters into tunnel engineering. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Numerical Simulation of Shield Tunnelling Under a Historic Building Based on the Local Stiffness Correction Method (DMSM)北大核心CSCD

The district modified stiffness method (DMSM) considers the effect of joints and hand holes on the stiff-ness of the lining ring, assuming the stiffness around the joint and hand hole is to be reduced and the stiffness else-where is not changed. Considering the stiffness reduction of the lining ring caused by the segment’s circumferential joint, the internal force of the lining structure, the ground surface settlement and the displacement response of the surrounding soil body induced by shield driving are analyzed by an HS small strain constitutive model, and a 3D FEM model is established to analyze the interactions among the tunnel, soil body and building to apply to the dou-ble-line running tunnel of Shanghai Metro Line 11, which crosses under a historic building. In contrast, a 3D numeri-cal model based on the routine method (RMM) is set up and a comparison with the site measured data is conducted,with results indicating that they agree very well. The simulation results show that the existing building not only changes the surface settlement trough but also largely reduces horizontal displacement at the corresponding measuring points of the settlement trough; the distortion values of the existing building are related to the positions of the tunnel face and the location of the building; and the final distortion doesn’t decrease after completion of tunnel construction, but major residual distortion remains. This simulation method provides a reference for the control of disturbances during shield construction in soft rock. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

聚合物和硅粉复合修复砂浆的性能试验

针对老旧码头混凝土修复需求较大,普通砂浆的修补效果有待提高等问题,采用丙烯酸乳液(PAE)和硅粉复合配制港工修复砂浆,进行试验研究,对试验数据分析得出:聚丙烯酸乳液的黏结作用以及硅粉的火山灰效应和填充作用可以有效改善修复砂浆力学性能,显著提高黏结强度,降低干缩,提高砂浆的抗冲磨、抗渗等耐久性能,相比于其他不掺丙烯酸乳液(PAE)和硅粉的砂浆综合性能更好,可替代普通砂浆作为良好的混凝土修补材料。     

全阶状态观测器在传动控制系统中的速度辨识

比较了直接转矩控制中2种计算定子磁链的方法：全阶磁链观测器法和电压-转速模型法的异同。利用MATLAB对设计的一个闭环磁链观测器进行极点配置,在该观测器基础上采用自适应原理对电机转速进行辨识。     

Flexible transport services: A new market opportunity for public transport

The term Demand-Responsive Transport (DRT) has been increasingly applied in the last 10 years to a niche market that replaces or feeds (usually via small low floor buses or taxis) conventional transport where demand is low and often spread over a large area. More recently, the concept of DRT as a niche market has been broadened to include a wider range of flexible, demand-responsive transport services and is increasingly referred to as Flexible Transport Services (FTSs). The contention of this paper is that well-implemented FTS has the potential to revitalise bus-based public transport services which are traditionally based on fixed networks with variable geographical coverage and levels of service.     

Hydrography, currents and distribution of suspended matter during a dumping experiment in the western Baltic Sea at a site near Warnemünde

During a dumping experiment on 20/21 June 2001, an extensive data record was collected to understand the dynamical processes in the water column of the investigation area and to validate model results. Weak westerly winds with strongly changing cloud coverage characterized the meteorological situation. During the second day the wind calmed down and moved shortly to easterly directions. The water column was characterized by a strong vertical stratification with discontinuity layers in temperature and salinity in 12 and 16 m. The current regime was dominated by outflow at the water surface and inflow along the German coast, with strong current shearing in the dumping area. The suspended matter clouds could be identified by optical methods and ADCP (Acoustic Doppler Current Profiler) scattering intensity. During the experiment the suspended matter plumes were only visible at the surface up to 1 h after the dumping. The aerial photographs document that the particle clouds at the surface drifted to the west and, after approximately 40 min, they were only weakly visible. The fine material was concentrated in the discontinuity layer leading to substantially higher values of optical parameters and suspended matter concentration than measured in the surface clouds. Due to the vertical current shears the material was transported in the water column in different directions. At the first day the maximum of the suspended matter in the discontinuity layer was in the north-western corner and in the bottom layer in the northeast corner of the dumping area. Strong wind conditions after the dumping led to periodical resuspension processes.     

Assimilation of sea surface temperature in the POL Coastal Ocean Modelling System

A one-dimensional scheme is used to assimilate satellite Sea Surface Temperature data into the Proudman Oceanographic Laboratory Coastal Ocean Modelling System, set up in the Irish Sea with a fine resolution ( 1.8 km). The capabilities of the assimilation scheme are investigated using two different sets of satellite data, of lower and similar resolution to that of the model respectively. Comparison of results with independent data show that assimilation improves the modelled Sea Surface Temperature, but does not address model representation of the temperature vertical structure. It is concluded that for the Irish Sea and at the scales resolved by the model, the assimilation problem cannot be approached in a one-dimensional framework. It is also pointed out that forecast error needs to account explicitly for errors in the representation of the vertical structure of the thermal field.Three-dimensional methods that are suited for coastal systems are then suggested.