Tensile properties of different chemical compositions for TRIP-assisted multiphase steel for automobile structures

The microstructural changes and the tensile properties of TRIP-assisted steels resulting from different chemical compositions were investigated by using SEM, TEM, XRD and UTM. As a result of microscopic observation, the morphology of retained austenite could be characterized by two types: a granular type in steel containing higher Si and a film type in steel having higher C. In the case of the steel containing higher C with a tensile strength of 860 MPa and a total elongation of 38%, the film type retained austenite could be observed among the lath bainitic ferrites. Actually, the metastable retained austenite was required for good formability, which means that the chemical composition plays a significant role in the microstructure and tensile property of TRIP-assisted steel. With respect to the tensile property, each steel type that contained an suitable amount of Si and Mn demonstrated a typical TRIP effect on a stress-strain curve while steel that contained a higher Mn content exhibited similar behaviors, as demonstrated in the dual phase steels.     

Evaluation of a vehicle directional control with a fractional order PD<Superscript>μ</Superscript> controller

In this paper, a novel controller, the fractional order PD^μ controller, is designed to improve the performance of the driver-vehicle system. First, fractional calculus and fractional order PI^λD^μ controller are introduced. A control algorithm for vehicle directional control using the fractional order PD^μ controller is then presented. Based on preview-follower theory, the on-line tuning method of the fractional order PD^μ controller is designed. By comparing simulated and experimental results, the validity and robustness of the proposed fractional order PD^μ controller in the closed loop system are verified. Finally, comprehensive evaluations are performed between the systems with the fractional order PD^μ controller and with an integer PD controller. The results demonstrate that the use of the fractional order controller leads to an improvement of the performance of the driver-vehicle system.     

Explaining obesity with urban form: a cautionary tale

In recent years, there has been a dramatic increase in studies exploring associations between the built environment and obesity. Many studies have found that built environment characteristics, such as high-density land developments, mixed-land uses, and connected street networks, are associated with lower rates of obesity. However, depending on the research field and the researcher, how one specifies the experimental model and how sociodemographic characteristics of the population are defined and included in the model has led to different policy conclusions and implications. This is not a surprising observation; however, it is one that does seem to have been lost in current discussions. This article highlights several data-processing, model-specification, and model-estimation factors that should be comprehensively considered in studies of the built environment and obesity. Empirical results based on data from Atlanta, GA, USA, illustrate that the association between the built environment and obesity is sensitive to how age, income, and educational attainment are included in the model. Also, a detailed examination of land-use-mix measures shows that it is difficult to create this measure and that results are sensitive to the treatment of missing values. Models that distinguish between overweight and obese individuals are shown to provide richer insights into the associations among obesity, built environment, and sociodemographic characteristics for the Atlanta area. The article concludes by offering modeling recommendations for future studies.

Just pricing: the distributional effects of congestion pricing and sales taxes

Those who oppose tolls and other forms of road pricing argue that low-income, urban residents will suffer if they must pay to use congested freeways. This contention, however, fails to consider (1) how much low-income residents already pay for transportation in taxes and fees, or (2) how much residents would pay for highway infrastructure under an alternative revenue-generating scheme, such as a sales tax. This paper compares the cost burden of a value-priced road, State Route 91 (SR91) in Orange County, California with the cost burden under Orange County’s local option transportation sales tax, Measure M. We find that although the sales tax spreads the costs of transportation facilities across a large number of people inside and outside Orange County, it redistributes about $3 million (USD) in revenues from less affluent residents to those with higher incomes. The entire Measure M program redistributes an estimated $26 million from low-income residents to the more affluent. Low-income drivers as individuals save substantially if they do not have to pay tolls, but as a group low-income residents, on average, pay more out-of-pocket with sales taxes.

沥青混凝土罩面对水泥混凝土路面裂缝的影响

耐久裂缝（Ｄ裂缝）是普通水泥混凝土（ＰＣＣ）损坏产生的,而且通常引起的原因是冬季的冻融循环。为了较好地研究Ｄ裂缝,ＰＣＣ配合比应采用良好级配的粗骨料。对ＰＣＣ路面上Ｄ裂缝维修的方法,大多是在ＰＣＣ上用沥青混凝土（ＡＣ）罩面,这样可使路表的使用功能重新恢复。但是有关ＡＣ罩面对开裂路面的长期作用的效果,人们却很少了解。对裂缝影响最主要的气候因素反映在湿度和温度方面。采用计算机模拟的有限差分瞬间流动的温     

Developing a conceptual model for sharing container terminal resources: a case study of the Gamman container terminal

It is an important matter closely connected with saving logistics costs, as well as encouraging national competitive power, to improve the productivity of container terminals by efficient utilization of container terminal resources. In this respect, this paper tries to suggest a conceptual model for sharing container terminal resources, taking as a case study the Gamman Container Terminal (GCT) in the port of Pusan. In so doing, it identifies what kinds of resources can be systematically shared from the viewpoint of their common use and draws some problems resulting from terminal operation by four operators at GCT. The model does not imply the conception that each terminal has its own resources individually, but recommends that tentatively-called Container Terminal Resource Management Center (CTRMC) should be established and operated in order to save operation and investment costs and improve operational efficiency. In addition, the continuous acquisition and life-cycle support (CALS) concept is imbedded in the model so that it can control the supply and demand of resources efficiently by sharing the database, through which the CTRMC can automatically identify the status of the excess or deficit of a certain resource in each berth at GCT.     

电力机车和电动车组自动过分相方案的发展方向

随着电力机车向高速发展、车内微机控制的普遍采用和完善,原有的3种自动过分相方案中,车上自动控制断电方案将是今后的发展方向。秦沈客运专线所采用的过分相预告信号及埋点方式仍是当前高速区段自动过分相的主流模式。     

Numerical study of a light-duty diesel engine with a dual-loop EGR system under frequent engine operating conditions using the doe method

Exhaust gas recirculation (EGR) is an emission control technology that allows for a significant reduction in NOx emissions from light- and heavy-duty diesel engines. The primary effects of EGR are a lower flame temperature and a lower oxygen concentration of the working fluid in the combustion chamber. A high pressure loop (HPL) EGR is characterized by a fast response, especially at lower speeds, but is only applicable if the turbine upstream pressure is sufficiently higher than the boost pressure. On the contrary, for the low pressure loop (LPL) EGR, a positive differential pressure between the turbine outlet and the compressor inlet is generally available. However, a LPL EGR is characterized by a slow response, especially at low and moderate speeds. In this study, of the future types of EGR systems, the dual-loop EGR system (which has the combined features of the high-pressure loop EGR and the low-pressure loop EGR) was developed and was optimized under five selected operating conditions using a commercial engine simulation program (GT-POWER) and the DOE method. Finally, significant improvements in the engine exhaust emissions and performance were obtained by controlling several major variables.     

Processing and fiber content effects on the machinability of compression moulded random direction short GFRP composites

The random direction short Glass Fiber Reinforced Plastics (GFRP) have been prepared by two compression moulding processes, namely the Preform and Sheet Moulding Compound (SMC) processes. Cutting force analysis and surface characterization are conducted on the random direction short GFRPs with varying fiber contents (25∼40%). Edge trimming experiments are preformed using carbide inserts with varing the depth of cut and cutting speed. Machining characteristics of the Preform and SMC processed random direction short GFRPs are evaluated in terms of cutting forces, surface quality, and tool wear. It is found that composite primary processing and fiber contents are major contributing factors influencing the cutting force magnitudes and surface textures. The SMC composites show better surface finish over the Preform composites due to less delamination and fiber pullouts. Moreover, matrix damage and fiber protrusions at the machined edge are reduced by increasing fiber content in the random direction short GFRP composites.     

Low cost design of parallel parking assist system based on an ultrasonic sensor

This paper presents a low cost design and implementation of a parallel parking assist system (PPAS) based on ultrasonic sensors. Generally, a PPAS requires several types of sensors, such as an ultrasonic sensor, camera sensor, radar sensor and laser sensor for parking space detection. However, our proposed PPAS only requires two ultrasonic sensors on the front and lateral sides for parking space detection. Moreover, a steering angle sensor and wheel speed sensor installed in the vehicle are used to obtain vehicle position information for localization in ultrasonic range data. The hardware architecture of the PPAS based on an electronic control unit (ECU) module, sensor modules and a human machine interface (HMI) module was proposed. Moreover, the software architecture of the PPAS is based on system initialization, scheduling, recognition and a control algorithm. In particular, a novel sensor algorithm was proposed to minimize the vehicle corner error of the ultrasonic sensor. A prototype of the PPAS based on the proposed architecture was constructed. The experimental results demonstrate that the implemented prototype is robust and successfully performs parking space detection and automatic steering control. Finally, the low cost design and implementation of the PPAS was possible due to the cheap ultrasonic sensors, simple hardware design and low computational complexity of the proposed algorithm.