Advanced Control Methods for Automotive Applications

This paper reviews key developments in applications of advanced control methods to automotive systems. Such applications appear in many aspects of vehicle controls. We will examine representative application areas, which include engines, suspension systems, traction systems, steering systems and those for automated highway systems (AHS). Each area is examined from the viewpoint of modeling and control algorithm development. Useful control theories for automotive application are briefly reviewed for better understanding of the applicability of these theories.     

Damper Models for Heavy Vehicle Ride Dynamics

A laboratory rig for testing hydraulic dampers using the 'hardware-in-the-loop' method is described, and the accuracy of the test method is investigated. A mathematical model of a hydraulic shock absorber is then developed. The model is suitable for vehicle simulations and has seven parameters which can be determined by simple dynamic measurements on a test damper. The shock absorber model is validated under realistic operating conditions using the test rig, and the relative importance of various features of the model on the accuracy of vehicle simulations is investigated.     

Preview Control Algorithms for the Active Suspension of an Off-Road Vehicle

The potential performance improvement using preview control for active vehicle suspension was first recognized in the late nineteen sixties. All work done since that time has been based on optimal control theory using simple vehicle models.

In this article, the performance of quarter vehicle preview controllers when applied to a real off-road vehicle is simulated using both two degree of freedom quarter and ten degree of freedom full vehicle models. The results, which are compared with non-preview active and conventional passive suspensions, confirm that preview control reduces vertical acceleration of the body centre of gravity, which results in improved ride quality. Further, reductions in pitch and roll motion result from smaller vertical displacements of the vehicle quarters. Coupling between quarters, through the vehicle body, appears to have a smoothing effect on the control.

As an alternative to optimal control theory based controllers, a simple ad hoc preview controller based on isolating the vehicle body from dynamic loads transmitted through the suspension is proposed. Simulation results show that such a controller outperforms the optimal control theory based controllers over small discrete disturbances but responds poorly to disturbances encountered from other than steady state.     

The Geometrical Contact between Track and Wheelset

In previous publications the author has described a so-called first-order theory for the motion of a railway vehicle wheelset on a tangent track. In the present report the geometrical aspect of this theory is further evaluated and a method for solving the constraint equations between the coordinates of the wheelset is indicated.     

Dual extended Kalman filter for vehicle state and parameter estimation

The article demonstrates the implementation of a model-based vehicle estimator, which can be used for combined estimation of vehicle states and parameters. The estimator is realised using the dual extended Kalman filter (DEKF) technique, which makes use of two Kalman filters running in parallel, thus 'splitting' the state and parameter estimation problems. Note that the two problems cannot be entirely separated due to their inherent interdependencies. This technique provides several advantages, such as the possibility to switch off the parameter estimator, once a sufficiently good set of estimates has been obtained. The estimator is based on a four-wheel vehicle model with four degrees of freedom, which accommodates the dominant modes only, and is designed to make use of several interchangeable tyre models. The paper demonstrates the appropriateness of the DEKF. Results to date indicate that this is an effective approach, which is considered to be of potential benefit to the automotive industry.     

Modelling of wheels and rail discontinuities in dynamic wheel-rail contact analysis

A classification of wheel-rail contact is given. Difference is made between modelling of a running wheel with continuous single-point-contact, as is common practice in wheel-rail contact analysis, and a wheel with transient double- or multi-point-contact, which may occur for rail irregularities with curvatures larger than that of the wheel circumference. It is shown that application of the first model for these irregularities will strongly underestimate the contact forces as it does not describe occurring mechanisms correctly. Further, it is shown that in principle it is not possible to describe the second type of contact fully correct with a lumped wheel model. Both wheel models are formulated mathematically for some basic contact cases. Afterwards, results are applied to a linear track model. Analytical closed-form solutions are found in the frequency domain for arbitrary type of contact and numerically transformed to the time domain. Finally, the necessity is shown to avoid situations where transient multiple-point-contact may occur (like rail joints) in practice.     

The Impact of Travel Time Information on Travelers’ Learning under Uncertainty

In this work, laboratory experiment was conducted in order to evaluate the effect of feedback on decision-making under uncertainty, with and without provided information about travel times. We discuss the prediction of travelers’ response to uncertainty in two route–choice situations. In the first situation travelers are faced with a route–choice problem in which travel times are uncertain but some external information about routes’ travel times is provided. The second situation takes place in a more uncertain environment in which external information about travel times is not provided, and the travelers’ only source of information is their own experience. Experimental results are in conflict with the paradigm about traveler information systems: As a consequence of information, the propensity of travelers to minimize expected travel time is not necessarily increased. Providing travelers with static information about expected travel times reveals an increase in the heterogeneity of travelers’ choices and reduces the maximization rate.     

Neuro-Fuzzy Control of a Tracked Vehicle Featuring Semi-Active Electro-Rheological Suspension Units

This paper presents vibration control of a tracked vehicle installed with electro-rheological suspension units (ERSU). As a first step, an in-arm type ERSU is designed, and its spring and damping characteristics are evaluated with respect to the intensity of electric fields. Subsequently, a 16 degree-of-freedom model for a tracked vehicle equipped with the proposed ERSU is established followed by the formulation of a neuro-fuzzy controller. This controller takes account for both ride quality and steering stability by adopting a weighting parameter between two performance requirements. The parameter is appropriately determined by employing a fuzzy algorithm associated with two fuzzy variables: the vertical speed of the body and the rotational angular speed of the wheel. Control performances to isolate unwanted vibration from bump and random road excitations are evaluated through computer simulations. In addition, maximum speed of the vehicle with 6 Watt power absorption is investigated with respect to the road roughness.     

应用有限元法研究车架结构的耐撞性

本文应用有限地对车辆正面碰撞过程中车架结构的大变形过程进行了计算机模拟。文中介绍了非线性有限元分析的基本方程，运用微机版ＤＹＮＡ３Ｄ软件，在合理简化的基础上，建立了车呆结构的有限元模型，通过计算机模拟，预测了车辆正碰过程中车架的变形位置和变形形式。针对存在的问题，对车架结构进行了改进设计。实车碰撞试验表明：改进后，车架结构的耐撞性有明显提高。     

Semi-active Damping with an Electromagnetic Force Generator

The main shortcoming of vehicle suspension systems is the amplification of input vibrations at the resonant frequency. A non-amplifying suspension system with a semi-active damping is being developed. The use of an electronically controlled rotational damper has been studied theoretically. A new sprung seat is being designed for the improvement of the working conditions for drivers of road and terrain vehicles.