On the observability of the fortnightly cycle of the Tagus estuary turbid plume using MODIS ocean colour images

Using three years (2003 to 2005) of MODIS-Aqua normalized water-leaving radiance at 551 nm this paper shows a fortnightly cycle in the Tagus estuary turbid plume. The Tagus estuary is one of the largest estuaries of the west coast of Europe and is located in the most populated area of Portugal, including the capital Lisbon. The turbid plume has been detected by the backscattering characteristics of the surface waters in the vicinity of the estuary mouth. In fortnightly scales, the turbid plume has smaller dimensions during and after neap tides and higher dimensions during and after spring tides. This is most probably associated with the fortnightly spring–neap tidal cycle and the consequent increase in turbidity inside the estuary during spring tides. During the summer weak spring tides (tidal amplitude approximately 2.5 m) no turbid plume is observed for an entire fortnightly cycle. Outside the summer months, precipitation, river discharge and winds, were found to increase the turbid area, but the fortnightly cycle appears to be superimposed on the large time-scale variability, and present throughout the year.     

Integrated reliability and sizing optimization of a large composite structure

In this paper, we present the application of probabilistic design modeling and reliability-based design optimization (RBDO) methodology to the sizing optimization of a composite advanced submarine sail structure under parametric uncertainty. With the help of probabilistic sensitivity analysis, the influence of individual random variables on each structural failure mode is examined, and the critical modes are treated as probabilistic design constraints under consistent lower bounds on the corresponding reliability indices. Whereas the failure modes are evaluated for structural components in the solution of the RBDO problem, the overall system reliability is also evaluated as a post-optimization step. The results indicate that in comparison to a deterministic-optimum design, the structural mass of the probabilistic optimum design is slightly higher when consistent probabilistic constraints are imposed, and the overall structural stiffness is found to be more critical than individual component laminate ply thicknesses in meeting the specified design constraints. Moreover, the post-optimality analysis shows that the overall system failure probability of the probabilistic optimum design is more than 50% lower than that of the deterministic optimal design with less than 5% penalty in structural mass.     

机车轴悬式电机悬挂齿轮副变形的三维有限元分析

本文用三维有限元方法对东风_4型内燃机车的整个牵引电机传动系统进行了计算。其计算模型利用假想的二力杆连接齿轮副的啮合点,人为地造成了均匀传递啮合力的力学条件,从而计算出了合理的齿轮修形量。     

Research progress and application of computational method for hydrodynamic noise from air-water interface北大核心CSCD

含水气界面水动力噪声是船海工程结构物经常遇到的一类典型重要噪声,具有机理复杂、声源形式多样、传播影响因素众多等特点。含水气界面水动力噪声与自由面相互作用,受空化、水气泡混合流等影响,对舰船的隐蔽性造成很多负面影响,具有重要的研究意义。分别从自由面噪声、空化噪声和水气泡混合流噪声3个方面进行介绍,并阐述相应噪声的计算方法以及在噪声计算时需要考虑的关键问题和目前所采用的解决方案。最后,展望未来的研究发展方向。     

A line impedance stabilization network for pulse current injection北大核心CSCD

［Objective］Aiming at the deficiency of the existing line impedance stability network (LISN) in the electromagnetic pulse protection capability, a LISN suitable for the pulse current injection (PCI) test of electrical and electronic equipment is proposed. ［Methods］Aiming at the characteristics of high peak value and fast rise of the pulse current in PCI testing, the circuit structure and physical structure of the LISN are improved on the existing basis through PSpice time-domain and frequency-domain simulation combined with engineering design requirements, thereby giving it good nanosecond pulse protection performance and impedance stability at the same time. Pulse current protection performance test and impedance curve test experiments are then designed and carried out.［Results］The experimental results show that the improved LISN can attenuate the injected pulse current by 60 times, while the error of its impedance curve is less than 5% compared with the Type 5 µH LISN in GJB 151B-2013. ［Conclusions］The proposed LISN has good impedance stability and decoupling ability, and can be used in the PCI testing of electrical and electronic equipment in order to protect the power supply and improve the repeatability of testing. © 2023 Chinese Journal of Ship Research. All rights reserved.     

Overview of intelligent ship route optimization methods北大核心CSCD

智能船舶航线优化在学术界和工业界均受到越来越多的关注。针对智能船舶航线优化问题,从航线设计方法和航线优化算法这2个层面,分别阐述各种设计方法和优化算法的特点。结合近5年来的最新研究成果,在分析国内外智能船舶航线优化技术发展现状的基础上,将航线设计方法归纳为3种,即基于气象数据的航线优化、基于油耗模型的航线优化以及基于航线库或航路点库的航线优化,剖析其技术内涵及应用情况;深入分析改进的等时线法、动态规划法、图形搜索算法、智能算法、人工智能和机器学习算法的特性及不足,总结归纳将各类算法应用于智能船舶航线优化时存在的主要问题。最后,简要展望智能船舶航线优化的发展趋势,为未来在该领域的研究提供一定的思路。     

Further study on the ultimate strength analysis of spherical pressure hulls

From a comparative study it is concluded that current design rules for the spherical pressure hull of manned submersible need to be updated and unified. In this paper, a series of spherical pressure hulls are calculated by nonlinear FEM. Based on these numerical results, the influence of critical arch length and the relationship of ultimate strength with t/R and structural imperfection are studied. Finally, empirical formulae for the ultimate strength of the titanium alloy spherical pressure hull of deep manned submersible based on numerical computations are given. The formulae can be used as the core equations to update current design rules.     

Transport of radionuclides by sea-ice and dense-water formed in western Kara Sea flaw leads

A transport assessment of particle-bound and dissolved artificial radionuclides (¹³⁷Cs and ^239,240Pu) by sea-ice and dense-water formed in western Kara Sea flaw leads close to the Novaya Zemlya dumping sites is presented in this study. We both performed a “best estimate” based on available data, and a “maximum assessment” relying on simulated constant releases of 1 TBq ¹³⁷Cs and ^239,240Pu from individual dumping bays. The estimates are based on a combination of (i) the content of particulate matter in sea-ice; (ii) analytical data and numerical simulations of radionuclide concentrations in shelf surface deposits, suspended particulate matter (SPM), and the dissolved phase; and (iii) estimates of lead-ice and dense-water formation rates as well as modeling results of local ice drift pathways. In the “best estimate” case, 2.90 GBq ¹³⁷Cs and 0.51 GBq ^239,240Pu attached to sea-ice sediments can be exported from the lead areas toward the central Arctic basin. The radionuclide burden of the annually formed dense lead water in the “best estimate” amounts to 4.68 TBq ¹³⁷Cs and 0.014 TBq ^239,240Pu. In the “maximum assessment”, potential export-rates of ice-particle bound ¹³⁷Cs and ^239,240Pu toward the central Arctic would amount to 0.64 and 0.16 TBq, respectively. As much as ≈900 TBq ¹³⁷Cs and ≈6.75 TBq ^239,240Pu could be annually taken up by 34.75 dense-water rejected in the lead area. Assuming the (unlikely) instantaneous release of the total ¹³⁷Cs and ^239,240Pu inventories (≈1 PBq and 10 TBq, respectively) from the Novaya Zemlya dumping sites into the dissolved phase, the dense lead water locally formed during one winter season could take up ≈90% of the Cs and ≈68% of the Pu released.     

Altimeter assimilation in the OCCAM global model: Part I: A twin experiment

An altimeter data assimilation scheme has been tested in the OCCAM (Ocean Circulation and Climate Advanced Modelling) global 1/4°, 36-level model using a twin experiment format. The Cooper and Haines displacement scheme is used. The method works well in most regions and depths. Currents and densities in the top 1000 m generally improve by over 50–70% after 5 months of sea level assimilation every 15 days. Below 1000 m, an error reduction of up to 50% is achieved. The errors remain low during a further 60-day run without assimilation. Diagnostics for the North Atlantic, the Tropical Pacific and the Antarctic Circumpolar Current are shown alongside the global averages.The main problems encountered were in weakly stratified regions of the Antarctic and Arctic seas. A scale selective filter is developed to avoid assimilating scales much larger than the local deformation radius, and this avoids the adverse assimilation effects in the southern oceans. A companion paper uses this scheme to assimilate TOPEX and ERS-1 altimeter maps.     

考虑不确定性因素的路径优化(英文)

A route optimization methodology in the frame of an onboard decision support/guidance system for the ship’s master has been developed and is presented in this paper.The method aims at the minimization of the fuel voyage cost and the risks related to the ship’s seakeeping performance expected to be within acceptable limits of voyage duration.Parts of this methodology were implemented by interfacing alternative probability assessment methods,such as Monte Carlo,first order reliability method(FORM) and second order reliability method(SORM),and a 3-D seakeeping code,including a software tool for the calculation of the added resistance in waves of NTUA-SDL.The entire system was integrated within the probabilistic analysis software PROBAN.Two of the main modules for the calculation of added resistance and the probabilistic assessment for the considered seakeeping hazards with respect to exceedance levels of predefined threshold values are herein elaborated and validation studies proved their efficiency in view of their implementation into an on-board optimization system.