PIV velocity field measurements of flow around a KRISO 3600TEU container ship model

The main purpose of this investigation was to demonstrate a useful application of the particle image velocimetry (PIV) method to analyze the complex flow characteristics around a ship. For a sample illustration, the KRISO 3600TEU container ship model was chosen. The flow structure in the stern and near-wake region of the model has been investigated experimentally in a circulating water channel. Instantaneous velocity fields measured by the PIV velocity field measurement technique have been ensemble-averaged to give details of flow structures such as the spatial distributions of the local mean velocity, vorticity, and turbulent kinetic energy. The free-stream velocity was fixed at U _o = 0.6m/s, and the corresponding Reynolds number based on the length between perpendiculars was about 9.0 × 10⁵. The container ship model shows a complicated three-dimensional flow structure in the stern and near-wake regions. The PIV results clearly revealed the formation of large-scale bilge vortices in the stern region and their effect on the flow in the near-wake. The results shown here provide valuable information for hull form design and the validation of viscous ship flow codes and of turbulence models.     

Roll Dynamics of Commercial Vehicles

An analytical model is developed here for studying the roll dynamics of commercial vehicles. Large displacements and rotations are accounted for in this nonlinear model so that it can be used for the study of roll dynamics well beyond the limits of wheel lift-off. The model is used to illustrate some of the dynamic phenomena in vehicle rollover, especially the interactive coupling between the roll and the vertical modes of motion. The influence of suspension backlash on rollover resistance is demonstrated, and the phenomenon of roll motion resonance is illustrated to suggest new means for evaluating vehicle rollover sensitivity.     

隧道检测系统及其在韩国高速铁路隧道的应用

介绍韩国高速铁路隧道安装的健康监测系统,提出基于检测数据诊断隧道衬砌可能破损的新系统识别方法。引入逆算法,即根据已知的形变数据和混凝土衬砌恒载,估计破损的程度和位置。对以刚度均减和裂缝概念为基础建立的两种模型进行效果和优劣比较。对理想化的隧道结构进行数学分析,并用检测数据中常用的白噪声对模型进行适应性研究。结果表明,基于刚度均减方法的模型1对白噪声相对不敏感,而以裂缝概念为基础的模型2由于受刚度减小的影响很小,易于现场应用。     

Engine performance and toxic gas analysis of biobutanol-blended gasoline as a vehicle fuel

A comprehensive study evaluating the performance of biobutanol-blended gasoline in passenger cars was conducted because biobutanol is considered a better biofuel than bioethanol as it has no water solubility and it has a higher caloric value, giving it a higher energy value. Several kinds of samples—suboctane gasoline, 8 volume percentage and 16 volume percentage biobutanol—blended gasoline, and a 10 volume percentage MTBE-blended market sample (as the oxygencontaining gasoline)-were tested to evaluate the engine performance in terms of the detergency of the intake valves and combustion chambers, power, emissions, and fuel efficiency. Additionally, the toxicity of the emissions from these biobutanolblended samples was tested in order to assess the viability of biobutanol as one of the competitive potential substitutes for MTBE as an oxygenator in the near future. The results show that biobutanol-blended gasoline samples had relatively better detergency, relatively higher power, and similar levels of emissions compared with those of MTBE-blended gasoline. Formaldehyde was emitted from all of the samples at almost the same levels and within the error range, whereas biobutanolblended gasoline samples emitted approximately three times the amount of acetaldehyde than did the suboctane gasoline. This study shows that biobutanol is one of the best alternative bioalcohol fuels for use in the near future.     

Towards integrated traveller information

Traveller information provision has become a key government priority in the UK following the publication of its Transport White Paper in July 1998. Developments are already underway for the integration of information systems across different public transport modes and between public transport information systems covering different regions. The Highways Agency (which is responsible for managing the strategic road network in the UK) is also advancing in its development of information databases and systems for the motorist. This paper considers the prospect of providing travellers with multimodal information with integration of driver information with public transport information. If such integration can be achieved then travellers, and in particular drivers, have the prospect of being presented with comparable information on travel options across modes. An integrated information service has a great potential to inform and influence travel choices. The paper considers the issue of travel choices and the role that information can play particularly in the context of mode choice. The political (UK) and technological climate for information provision is outlined. The paper identifies issues that will need to be addressed to identify the requirements from, and potential benefits of, integrated information, and the obstacles and challenges likely to be faced in moving towards it. Driver reactions, in particular, to the prospect of integrated information provision are fundamental to the assessment of its potential importance and value.     

A trial application of FSA methodology to the hatchway watertight integrity of bulk carriers

Formal safety assessment (FSA) is a formal, structured and systematic methodology, aimed at enhancing maritime safety, including protection of life, property and marine environment, by using risk and cost–benefit assessments. For the application of this methodology to the rule-making process, the International Maritime Organization (IMO) presented the Interim Guidelines, which describe procedures of FSA and inputs/outputs of each procedure in detail. This paper basically deals with an application of FSA methodology according to the IMO's Interim Guidelines to the hatchway watertight integrity of bulk carriers, which was carried out as a cooperative research between Korean Register of Shipping and Seoul National University. As results of this application study, 18 hazards are identified and 32 risk control measures are devised to reduce the associated risks. Potential risks, costs and benefits when some Risk Control Options are introduced are evaluated in monetary unit of US $. Finally, some discussions and recommendations based on experiences are also given for both future work and better application of this FSA methodology to the rule-making process.     

Origin–destination table disaggregation using biproportional least squares estimation

This paper describes a group of techniques for disaggregating origin–destination tables for travel forecasting that makes explicit use of observed traffic on a network. Five models within the group are presented, each of which uses nonlinear least-squares estimation to obtain row and column factors for splitting trip totals from and to larger geographical areas into smaller ones. The techniques are philosophically similar to Fratar factoring, although the solution method is quite different. The techniques are tested on a full-sized network for Northfield, MN and are found to work effectively.     

船闸水工建筑物的检测与评估技术

采用现代测试技术及分析方法对船闸水工建筑物进行定期的检测评估可有效延长建筑物的使用寿命。提出了船闸水工建筑物检测与评估工作的一般流程,包括船闸现状的调查、检测方案的制定、现场检测的实施、检测报告的形成、评估单位的划分、复核验算的考虑因素、评估内容及方法及评估报告的形成,并就相关的检测与评估关键技术进行了阐述。     

Overview of intelligent ship route optimization methods北大核心CSCD

智能船舶航线优化在学术界和工业界均受到越来越多的关注。针对智能船舶航线优化问题,从航线设计方法和航线优化算法这2个层面,分别阐述各种设计方法和优化算法的特点。结合近5年来的最新研究成果,在分析国内外智能船舶航线优化技术发展现状的基础上,将航线设计方法归纳为3种,即基于气象数据的航线优化、基于油耗模型的航线优化以及基于航线库或航路点库的航线优化,剖析其技术内涵及应用情况;深入分析改进的等时线法、动态规划法、图形搜索算法、智能算法、人工智能和机器学习算法的特性及不足,总结归纳将各类算法应用于智能船舶航线优化时存在的主要问题。最后,简要展望智能船舶航线优化的发展趋势,为未来在该领域的研究提供一定的思路。     

Gasket life criteria at low temperatures adopting proportional compensation for loss of flexibility and conformability

In the automobile industry, the service life of gaskets is defined as the time until which a released gasket recovers 60 % of the original compression. It was observed that the recovery curves of gaskets were highly nonlinear at high temperatures, and relatively nonlinear at temperatures above the room temperature. However, it was also noted that the recovery curves of the gaskets at temperatures below room temperature exhibited linearity with respect to the ln(time). Automotive manufacturers demand gasket life criteria that exceed a specific time or the entire life of a car. In the case of gaskets used at lower temperatures, since materials encounter losses in its flexibility and conformability, the definition of service life specifying a 60 % recovery may not be sufficiently safe to eliminate possible leakages. In this study, new gasket life criteria that could be used at low temperatures were proposed. The new criteria were proposed based on the change in Young’s modulus of the gasket material in order to conserve the sealing capability.