Analysis of Ground Response and Structure Stress Induced by PBA Method北大核心CSCD

The application of prefabricated tunnel technology has been become a new research field both in China and abroad. Based on the running tunnel between Yufuhe station and Wangfuzhuang station of Jinan rail transit line R1, a new prefabricated tunnel construction technology, the PBA method is presented. This paper makes a detailed discussion on section form, supporting scheme and construction process of the PBA method. In this study, 3D a new 3D numerical model for PBA method is presented by finite difference numerical simulation software Flac and the construction processes are modeled. The rule of ground surface settlement, ground deformation and structural stress caused by PBA method is studied in detail. Results show that the structure of PBA method can effectively control the deformation magnitude and scope. Stress concentration appears at the prefabricated connection parts and the reinforcement needs to check. The total assembled structure forms the load-bearing system after the completion of the lateral wall. The built-in depth of the precast pile and pile bottom grouting quality should to be ensured to control the displacement of the precast piles. The results of this study will be a useful reference for similar projects in the future. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

舰船中压直流综合电力推进系统稳态分析研究

本文对舰船中压直流综合电力推进系统进行稳态分析。首先,根据舰船中压直流综合电力系统基本特点,选定直流分层前推回代法作为基本方法加以改进;同时,提出了适用于该方法的支路计算等效模型,并将上述思想进行程序实现。通过算例分析结果可知,论文所提出的基于直流分层前推回代法的潮流计算方法,能够适用于舰船中压直流综合电力推进系统。     

大功率脉冲电能变换器功率模块叠层母排设计与优化研究

通过分析叠层母排设计的基本原理,对大功率脉冲电能变换器功率模块叠层母排的设计要点进行了研究。论文依据母排结构对杂散电感的影响,明确了叠层母排设计和优化的原则,并运用到大功率脉冲电能变换器的叠层母排设计中。最后通过软件仿真分析,验证了母排设计原则的可行性及大功率脉冲电能变换器叠层母排设计的合理性。     

船舶电网谐波分析

本文介绍了电力推进船舶谐波,阐明了谐波产生的原因和谐波的危害,分析总结了抑制船舶谐波的方法和措施。     

锌氧化银电池注液激活系统仿真模拟

利用ANSYS Fluent软件对锌氧化银一次电池注液激活系统进行模拟分析,在三种不同特性的点火器匹配注液激活系统条件下,模拟计算各个阀门能否正常开启、开启时间以及开启的顺序。分析计算得出各个阀门开启的时间,能够很好的指导注液系统设计。     

吉隆坡地铁A标段盾构土舱压力的计算与分析

文章以吉隆坡新捷运工程地下北段A标工程为例,基于Horn的三维楔形体破坏理论,采用极限平衡分析法,推导出了在土压及全水头压力作用下满舱土、半舱土、无土三种状态下土舱压力的计算方法,并采用整体分析与局部分析相结合的方法进行了验证。从计算结果可以看出,影响土舱压力的因素主要有水位高度、覆土厚度、粘聚力、覆土及掌子面处的内摩擦角,并对这五个因素进行了敏感性分析。通过运用该方法计算的土舱压力进行掘进并对现场监控量测数据进行分析,地表沉降均满足相关设计要求。     

高速铁路交叉隧道动力学问题研究综述

文章针对高速铁路交叉隧道的分类和组合型式进行划分,分别阐述了其存在的关键动力学问题,并通过广泛的相关文献调研,总结了高速铁路交叉隧道在列车振动、空气动力效应以及地震震动等方面的研究现状与不足;指出了今后的研究重点:(1)考虑隧道结构、地层参数以及邻近交叉隧道的结构特征,建立高速列车-轨道-交叉隧道为一体的三维精细化分析模型,并用其开展定量安全评价;(2)开展车隧气动结构效应研究,提出保障隧道结构安全的工程措施,进而建立考虑列车气动荷载与其他动力荷载叠加作用下交叉隧道的安全性评估方法;(3)进行全方位的高速铁路交叉隧道地震动力响应研究,揭示交叉隧道结构本身的动力特性,提出相适应的抗震设计方法;(4)引入混凝土和岩石动力损伤本构关系,建立能考虑材料动态损伤的计算模型,以对结构在长期反复动力作用下的动力响应特性及其累积损伤效应开展深入研究。     

Bush-based sensitivity analysis for approximating subnetwork diversion

Subnetwork analysis is often used in traffic assignment problems to reduce the size of the network being analyzed, with a corresponding decrease in computation time. This is particularly important in network design, second-best pricing, or other bilevel problems in which many equilibrium runs must be solved as a subproblem to a master optimization program. A fixed trip table based on an equilibrium path flow solution is often used, but this ignores important attraction and diversion effects as drivers (globally) change routes in response to (local) subnetwork changes. This paper presents an approach for replacing a regional network with a smaller one, containing all of the subnetwork, and zones. Artificial arcs are created to represent “all paths” between each origin and subnetwork boundary node, under the assumption that the set of equilibrium routes does not change. The primary contribution of the paper is a procedure for estimating a cost function on these artificial arcs, using derivatives of the equilibrium travel times between the end nodes to create a Taylor series. A bush-based representation allows rapid calculation of these derivatives. Two methods for calculating these derivatives are presented, one based on network transformations and resembling techniques used in the analysis of resistive circuits, and another based on iterated solution of a nested set of linear equations. These methods are applied to two networks, one small and artificial, and the other a regional network representing the Austin, Texas metropolitan area. These demonstrations show substantial improvement in accuracy as compared to using a fixed table, and demonstrate the efficiency of the proposed approach.     

软弱围岩隧道修建新方法——核心土加固变形控制法

2006年我国铁路系统相关施工单位开始接触变形控制法隧道施工技术,经过长达5年的基础理论学习研究与准备,在铁道部和兰渝铁路公司的支持下,2011年由中铁瑞威公司和意大利土力公司联合在兰渝铁路桃树坪隧道进行了中国首次隧道核心土加固变形控制法应用试验研究,并取得成功。文章通过工程实践,对桃树坪隧道的工程概况、地质问题、施工工艺、施工设备及核心土加固控制变形技术的应用效果作了较详细介绍。     

大洋勘探船钻探系统总体方案设计

针对大洋科学钻探的实际需求,确定大洋勘探船钻探系统总体布置原则,开展提升系统、深孔钻进补偿系统、管柱自动化系统、钻探取芯及岩芯输送系统等关键系统的选型研究,确定目标勘探船提升系统采用绞车提升系统方案、深孔钻进补偿系统采用天车补偿方案、管柱自动化系统采用柱式排管系统方案,在此基础上完成钻探系统总体方案设计,为大洋勘探船钻探系统工程建造提供依据。