RECENT DEVELOPMENT OF PROCESS SIMULATION AND ITS APPLICATIONS TO MANUFACTURING PROCESSES

l.IntroductionThemostboortantdrivingforceinmanufacturillistoPrOduCeabetterPrOductatalowercost.GenerallyeffecthemethodsinchideshOrtenintheleadtiminthedesigncyCle,andredUcinthetoolingcostandmaChinedOWnmeatProductionst4e.AllOfthemrewtabettertmderstandingofhO…     

Influence of load and inflation pressure on the tyre rolling resistance

Tyre load and inflation pressure are important factors controlling rolling resistance of road vehicles. The article presents results obtained in the Technical University of Gdańsk during laboratory and road measurements of different car tyres rolling on different pavements. The knowledge of rolling resistance characteristics is important for modelling car dynamics as well as fuel consumption. It is also necessary to establish proper test conditions in the future standardized on-road method of measuring rolling resistance. The results indicate that while an increase of load always leads to the increase of rolling resistance force, the influence on Coefficient of Rolling Resistance is more complicated and unpredictable. They also indicate that tyres with high rolling resistance are more sensitive to inflation pressure changes than low rolling resistance tyres.     

管道技术

全世界正在以前所未有的速度消耗着石油和天然气，因此，需要以成本效益的方式开发新的资源。然而，最近管道设计公司面临更具挑战性的海上和海底环境，从而需要采取新的方式来克服不寻常的设计挑战     

Implementation of discharging/charging current sensorless state-of-charge estimator reflecting cell-to-cell variations in lithium-ion series battery packs

This paper offers novel insights to the design and implementation of an innovative state-of-charge (SOC) estimator for the lithium-ion (Li-Ion) series battery pack. The most interesting feature of this approach is that it can utilize information from each filtered terminal voltage of the Li-Ion cells connected in series for SOC estimation of the battery pack. Without actual sensing each discharging/charging current (DCC) applied to the Li-Ion cells, it is possible to extract each DCC estimation from the corresponding filtered terminal voltages with an equivalent electrical circuit model (EECM) identification of all Li-Ion cells in the battery pack. There are two advantages to SOC estimation of the battery pack with this approach. First, the proposal can be implemented simply and effectively, reducing the computational steps required for SOC estimation. By reducing computational steps, the proposal is expected to be more cost-effective. Second, the approach guarantees an improved SOC performance, even if the battery pack results in inevitable cell-to-cell variation among Li-Ion cells. Accordingly, there are fewer differences to previously estimated DCCs among Li-Ion cells. Specifically, all values from the estimated DCCs are properly compensated for by simultaneous parameter modification according to each cell’s electrochemical characteristics. Experimental results clearly demonstrate that our DCC sensorless SOC estimator provides robust SOC performance for the battery pack. This approach considered an experimental battery pack (12S1P) connected in series using 2.6 Ah LiCoO2 cells produced by Samsung SDI.     

One city,three models: comparison of land‐use/transport policy simulation models for Dortmund

The paper reports on simulation experiments conducted by the International Study Group on Land‐Use/Transport Interaction (ISGLUTI) for the metropolitan region of Dortmund in the Federal Republic of Germany. Three land‐use/transport simulation models were applied to the Dortmund region: the DORTMUND model developed at the University of Dortmund, the LILT model being used at University College London and the MEPLAN package developed by Marcial Echenique & Partners in Cambridge. The three models are briefly characterized and their ex‐post forecasts are compared with the actual development of the region. The final section of the paper compares how the three models respond to a common set of assumptions and policies from the fields of land‐use control, traffic management and transport investment. The differences in model response give insights into the validity of the theoretical foundations and internal structure of the models.     

Bicyclist commuters’ choice of on-street versus off-street route segments

When using limited funds on bicycle facilities, it would be helpful to know the extent to which a new facility will be used. If a bicycle lane is added to a street, how many bicyclists will no longer use the adjacent sidewalk? If a separate bicycle path is constructed, how many bicyclists will move from the street or sidewalk? This study seeks to identify factors that explain a bicyclist’s choice between available facility choices—off-street (sidewalk and bicycle path) or on-street (bicycle lane and roadway). This paper investigates these issues through a survey of bicyclists headed to Purdue University in West Lafayette, IN, USA. The first data collected to address these questions were “site-based”. Bicyclists were interviewed on campus at the end of their trips and asked which part of the cross-sections along their routes they had used—on-street or off-street. The characteristics of a particular cross-section of street right-of-way were then compared against the characteristics of each bicyclist and his/her observed choice of street, sidewalk, lane, or path. Later, “route-based” serial data were also added. The study developed a mixed logit model to analyze the bicyclists’ facility preferences and capture the unobserved heterogeneity across the population. Effective sidewalk width, traffic signals, segment length, road functional class, street pavement condition, and one-way street configuration were found to be statistically significant. A bicycle path is found to be more attractive than a bicycle lane. Predictions from the model can indicate where investments in particular bicycle facilities would have the most desirable response from bicyclists.     

Experimental study on a model azimuthing podded propulsor in ice

The objective of this study was to investigate the performance of a model azimuthing podded propulsor in ice-covered water. Model tests were carried out with two different depths of cut into the ice (15 and 35 mm), two different ice conditions (presawn and pack ice conditions), and four different azimuthing angles. The depth of cut is the maximum penetration depth of the propeller blade into the ice block. The 0.3-m-diameter model propeller was operated in a continuous ice milling condition. Ice loads were measured by several sensors which were installed in various positions on the model. Six one-axis pancake-style load cells on the top of the model measured the global loads and two six-component dynamometers were installed on the shaft to measure the shaft loads. One six-component dynamometer was attached to the one of the propeller blades inside the hub to measure the blade loads. The pod unit and propeller performance in ice are presented. Ice-related loads, which were obtained when the blade was inside the ice block, are introduced and discussed. During the propeller–ice interaction, a blade can experience the path generated by the previous blade, which is called the shadowing effect. The effects of shadowing, depth of cut, azimuthing angle, and advance coefficient on propulsor performance are presented and discussed.     

Improving pollutant emissions in diesel engines for heavy-duty transportation using retarded intake valve closing strategies

A combined theoretical and experimental study has been carried out to determine the real potential of reducing pollutant emissions in a HD diesel engine by means of retarding the intake valve closing. The effects produced by this alteration of the basic operation cycle have been examined by a preliminary modelling study, and from the obtained results, a modified camshaft was manufactured with a delayed intake valve closing of 60 crank angle degrees. Single-cylinder engine tests were carried out with this modified camshaft, and the emissions and fuel consumption were recorded. The results showed that the retarded intake valve closing can enhance the premixed combustion phase, and thus simultaneously reduce soot and NOx emissions. Moreover, the combustion process attained is extremely tolerant to exhaust gas recirculation, and by adoption of this measure, Euro-5 emissions limits can be achieved at the tested conditions without after-treatment.     

Trip distribution for limited destinations: a case study for grocery shopping trips in the Netherlands

In this paper, we introduce a new trip distribution model for destinations that are not homogeneously distributed. The model is a gravity model in which the spatial configuration of destinations is incorporated in the modeling process. The performance was tested on a survey with reported grocery shopping trips in the Dutch city of Almelo. The results show that the new model outperforms the traditional gravity model. It is also superior to the intervening opportunities model, because the distribution can be described as a function of travel costs, without increasing the computational time. In this study, the distribution was described by a simple function of Euclidean distance, which provides a good fit to the survey data. The slope of the distribution is quite steep. This shows that most trips are made to nearby supermarkets. However, a significant fraction of trips, mainly made by car, still goes to supermarkets further away. We argue that modeling of these trips by the new method will improve traffic flow predictions.     

Trip generation of vulnerable populations in three Canadian cities: a spatial ordered probit approach

This paper provides an analysis of trip generation of three vulnerable groups: single-parent families, low income households, and the elderly. It compares the mobility of these groups to that of the general population in three Canadian urban areas of Hamilton, Montreal and Toronto, based on data from large-sample metropolitan transport surveys. An ordered probit model with spatially expanded coefficients is used for the analysis. Spatial expansion shows that there are spatial mobility trends for elderly populations and low-income populations even after socio-economic attributes are accounted for. Such spatial differences are not generally found for single parent families. This novel spatial analysis provides clues as to where vulnerable populations may experience greater degrees of social exclusion. It provides information to help prioritize transportation infrastructure projects or other social programs to take into account the needs of vulnerable populations with the lowest levels of mobility.