电流型GTR有源无功补偿器的研究

介绍了以电流波形补偿理论为根据，由ＧＴＲ电流型四象限变流器构成的有源无功功率补偿器。详细叙述了补偿器的补偿原理、主电路工作方式、控制系统的结构及其控制策略。实验表明该系统能实时地、完全地补偿电网上的基波和谐波无功，并且具有系统简单、控制方便、体积小等优点。     

论二阶Euler—Lagrange方程的形式和结构

本文讨论m个变元情形,得到结论:m≥2时,二阶方程为Euler-Lagrange方程的充要条件是它为Monge-Ampere方程,其系数满足某些条件。     

Effect of fatigue strain range on properties of high-strength structural steel

Ship hulls are built with stiffened steel plates and experience continuous fatigue load cycles when in service. Mechanical properties of the steel are expected to change due to the application of these cyclic loads. Therefore, the mechanical properties of the material at various levels of fatigue damage need to be understood. This paper presents two test series that were conducted to determine the effect of two different strain ranges (2000 and 3000 micro strains) of fatigue cycles on the mechanical properties of high-strength structural steel. The test results indicate that the cycle-dependent behaviours of the material can cause a slight increase or a significant decrease in the yield strength when compared to its virgin state. However, the ductility of the steel does not change much as the strain cycle increases.     

Effects of information in road transport networks with recurrent congestion

This paper aims to gain more insight into the implications of information provision to drivers on the performance of road transport networks with recurrent congestion. For this purpose, a simulation program consisting of three components has been written. The first component is the traffic simulation model, the second component is the information provision mechanism, and the third component monitors the behavioural decision-making process of the drivers, which is modelled using a utility-based satisficing principle. Three types of information provision mechanisms will be considered: information based upon own-experience, after-trip information and real-time en route information. The findings in this paper, obtained in a hypothetical context, underline the important relationship betweenoverreaction, thelevel of market penetration and thequality of the information. High quality information allows a high level of market penetration, while low quality information, even when provided at low levels of market penetration, induces overreaction. Furthermore, real-time en route information is in particular beneficial during the process leading to a steady state; it reduces the variance in travel time considerably. The paper concludes with a discussion on the market potential of motorist information systems when commercially marketed.     

SLENIUM FROM BEEF IS HIGHLY BIOAVAILABLE AS ASSESSED BY LIVER GLUTATHIONE PEROXIDASE （EC1．11．1．9） ACTIVITY AND TISSUE SELENI

ＳＬＥＮＩＵＭＦＲＯＭＢＥＥＦＩＳＨＩＧＨＬＹＢＩＯＡＶＡＩＬＡＢＬＥＡＳＡＳＳＥＳＳＥＤＢＹＬＩＶＥＲＧＬＵＴＡＴＨＩＯＮＥＰＥＲＯＸＩＤＡＳＥ（Ｅ．１．１．９）ＡＣＴＩＶＩＴＹＡＮＤＴＩＳＳＵＥ　ＳＥＬＥＮＩＵＭＳｈｉＢｉｎｇ；Ｊ．Ｅ．Ｓｐａｌｌ...     

Reliability assessment of maintained ship hulls with correlated corroded elements

This paper reviews the factors that affect the corrosion rate of the ship hull girder. It is shown that corrosion rates vary as a function of the location of the element in the structure, of the ocean area and type of ballast tank and steel. However, the corrosion rate in elements that are subjected to similar conditions is highly correlated.

A time-variant formulation is proposed including the correlation between the corrosion rates in neighbouring elements in modelling the degrading effect that corrosion has on the reliability of ship hulls. The effect of corrosion is represented as a time-dependent decrease of plate thickness that affects the midship section modulus. One repair policy was considered and the example results show the effect of plate replacement when its thickness reaches 75% of the original value. The results also illustrate how the limit value of the thickness in the repair criteria influences the reliability and the decision about repair actions. This is also shown for the effect of different corrosion rates, inspection intervals, and allowable stresses.     

On the axial force induced on a duct by a propulsor

The axial force induced on a duct (duct thrust) which surrounds a propulsor is, by means of an energy conservation argument, expressed in terms of the thrust and power of the propulsor and the kinetic energy losses per unit of time of the propulsor and the duct. Emphasis is put on the linear theory of an axisymmetric ducted actuator disk, where it is shown that the work done by the duct thrust is equal to the extra work done by the actuator disk when it is surrounded by the duct. This simplified model gives more insight into the interaction between the propeller and the duct and on the limits of linearization.     

Wave impact on a horizontal elastic plate

The objective is to find slamming-induced local stresses in the steel or aluminum wetdeck of a multihull vessel. This is studied theoretically by representing the wetdeck as a beam model and accounting for dynamic hydroelastic effects. Two numerical methods are used, one being a simplified asymptotic solution. Satisfactory agreement between the two methods is reported. Experimental drop tests of horizontal elastic plates of steel and aluminum are also reported, and the results from the experiments agree well with the numerical computations. This study reveals, both numerically and experimentally, that slamming-induced local stresses are strongly influenced by dynamic hydroelastic effects. The maximum bending stresses are insensitive to where waves hit, the curvature of the waves, and maximum pressures. Measured maximum pressures are very sensitive to external conditions, and cannot be used as a measure of maximum local bending stresses. A simple procedure for local design stresses due to wetdeck slamming is outlined.     

Pb and Pu in the Northeast Water Polynya, Greenland: particle dynamics and sediment mixing rates

Distributions of the radionuclides ²¹⁰Pb and ^239,240Pu in sediment cores from the Northeast Water Polynya, Greenland, showed that these nuclides reached depths of 5–15 cm by particle mixing and sediment accumulation. End-member average values of the particle mixing coefficient and sediment accumulation rate were 0.13 cm² y⁻¹ and 0.06 cm y⁻¹, obtained from the ²¹⁰Pb profiles by assuming that each process is dominant relative to the other. Both ²¹⁰Pb and ^239,240Pu were measured on four cores; using the Pu data to constrain mixing rates produced corrected sediment accumulation rates that were 20–80% of the values calculated by neglecting mixing. Organic carbon burial in the polynya sediments was ≤0.4 mmol m⁻² d⁻¹, based on measured POC values at depth in the sediments and sediment accumulation rates corrected for mixing. This value is about 1% of the independently measured POC flux leaving the euphotic zone and compares with benthic carbon remineralization rates of 7% calculated by others from O₂ uptake in the sediments.The inventories of excess ²¹⁰Pb in the sediments ranged from 6 to 28 dpm cm⁻². Relative to the atmospheric input of ²¹⁰Pb and in situ production from decay of ²²⁶Ra, approximately 5 dpm cm⁻² of ²¹⁰Pb was being removed from the water column. The difference between the removal from the water column and sediment inventories suggests a net import of ²¹⁰Pb to the polynya. This may occur by input of dissolved ²¹⁰Pb from offshore waters or by input of ²¹⁰Pb carried by sea ice. Particulate matter in land-derived fast ice adjacent to the polynya contained 330 ± 14 dpm of excess ²¹⁰Pb g⁻¹. If particles transported in sea ice are comparable to those extracted from fast ice, then sea ice transport into the polynya followed by melting may be an important source of excess ²¹⁰Pb to the area. Fast ice also may contribute ²¹⁰Pb if portions break off and melt within the polynya, as occurred in 1993.