Elasto-plastic modeling of soft soil considering degradation of stiffness

The stiffness has a large influence on the behavior of soils. Its value is affected by some of the soils properties, such as the over consolidated ratio(OCR), the effective normal stress, and the plasticity index etc. In this paper, the numerical modeling of soft soils was carried out using an improved elasto-plastic S-clay1 model accounting for degradation of stiffness. The relation between the stiffness and the shear strain was established based on a large number of experimental data. The effects of strain-dependent stiffness of normally consolidated soils and over consolidated soils on the stress-strain behavior were studied through a comparison of the simulations with the experimental results of undrained triaxial compression tests. The results show that the behaviors of soils can be well predicted with the improved constitutive model, particularly before the peak stress.     

Decomposing and Cluster Refinement Design Method for Application-Specific Network-on-Chips

Along with higher and higher integration of intellectual properties (IPs) on a single chip, traditional bus-based system-on-chips (SoC) meets several design difficulties (such as low scalability, high power consumption, packet latency and clock tree problem). As a promising solution, network-on-chips (NoC) has been proposed and widely studied. In this work, a novel algorithm for NoC topology synthesis, which is decomposing and cluster refinement (DCR) algorithm, has been proposed to minimize the total power consumption of application-specific NoC. This algorithm is composed of two stages: decomposing with cluster generation, and cluster refinement. For partitioning and cluster generation, an initial low-power solution for NoC topology is generated. For cluster refinement, the clustering is optimized by performing floorplan to further reduce power consumption. Meanwhile, a good tradeoff between power consumption and CPU time can be achieved. Experimental results show that the proposed method outperforms the existing work.     

探地雷达在已建高速公路岩溶塌陷探测中的应用

受通车及路面等条件的限制,对已建高速公路进行岩溶塌陷探测的手段有限。文章基于探地雷达的基本原理和特征参数,应用探地雷达对常张高速公路岩溶塌陷区进行无损探测,推断出该路基的岩溶发育及稳定情况。探测成果表明,探地雷达是一种快速无损的探测方法,可为高速公路岩溶处治提供依据。     

基于Ansys的矩形加筋平盖封头强度评定

将有限元方法与分析设计相结合,利用有限元分析软件Ansys对一种矩形加筋平盖封头进行强度评定。本文首先介绍瓶盖封头结构的改进。然后建立有限元模型,并进行应力求解。结果表明,此加筋平盖封头满足强度要求,与普通平盖封头相比,减小了平盖的厚度,降低了结构总重量,对平盖封头的结构改进设计具有一定指导作用。     

基于TEM的玉磨铁路隧道渗漏水状态预测方法研究

瞬变电磁探测结论因高度依赖作业人员的工作经验而具有较高的主观性和偏差性.为了提高瞬变电磁探测结论的准确性与客观性,以在股状地下水的冲刷下极易发生涌突事故的玉磨铁路新平隧道为研究对象,在大量瞬变电磁超前探水试验的基础上,确定视电阻率区间与地下水渗漏水状态的对应关系,同时基于Voxler软件建立80 m×40 m×40 m(长×宽×高)含水体模型,提出了基于瞬变电磁技术的隧道施工渗漏水状态预测方法,实现了对隧道施工渗漏水状态的定量预测,通过实例验证,与现场开挖揭示基本相符,能满足现场安全生产的需要.     

传感器智能芯片与阵列光纤对接平台运动顺序优化

从运动平台空间运动可能存在的720种运动顺序配置入手, 针对智能芯片与阵列光纤对接过程各运动单元产生的几何误差进行敏感性分析, 通过区分和归类各运动单元的敏感误差和不敏感误差, 将运动平台运动顺序配置数减少到90;考虑到运动平台各运动单元具有均匀分散、齐整可比的特性, 运用正交试验设计方法将敏感误差和不敏感误差确定为3个水平, 将6个运动单元确定为6个影响因素, 建立了对应的正交试验表, 得出了5条运动顺序配置的试验路径; 借助MATLAB仿真平台对5条运动顺序配置的试验路径进行了仿真试验, 获得了运动平台运动顺序最优配置; 在封装系统多自由度精密运动平台上进行了实测试验, 检验了仿真试验结果。试验结果表明: 传感器智能芯片与阵列光纤对接的运动平台在空间直角坐标系中最优的运动顺序为先沿横轴平动, 再绕横轴转动, 再绕纵轴转动, 最后沿纵轴平动; 该方法可优化光纤扫描雷达传感器智能芯片与阵列光纤对接的运动平台的空间运动顺序, 还可预测和规划其他多自由度运动平台的配准路径。      

STX4型驮背多功能运输车车体制造工艺

介绍了STX4型驮背多功能运输车的主要结构特点,分析了车体制造过程中的控制要点和难点,同时对制造难点提出了应对措施,有效保证了STX4型驮背多功能运输车的制造质量。     

Application of digital image correlation method to in-situ dynamic strain measurement

Application of digital image correlation (DIC) method to determination of in-situ dynamic strain is presented in this study. Firstly, an integrative software is programmed based on the DIC algorithms and point-wise least-squares fitting technique. Then, simulated speckle images are generated to study the computational accuracy of this software. The experimental setup and procedures for measuring in-situ dynamic strain through both DIC and strain gauge are proposed. The DIC results are close to those measured by strain gauge. This fact reveals that DIC is a practical and effective tool for in-situ dynamic strain measurement. Finally, the full-field in-situ dynamic strain of another specimen is measured by DIC, and the overall distribution of the strain in the measurement area is clearly shown.     

融合已聚力 发展正当时

浩渺行无极,扬帆但信风。一体共发展,同向曙霞东。海事监管和航海保障,关系到国家主权、经济发展、航运与水域安全。2019年航海保障工作座谈会强调要持续推动海事监管和航海保障"一体化"融合发展,为推进交通强国建设作出新贡献、展现新形象。     

基于有限元分析的五相感应电机参数计算

以自行设计的一台五相感应电机为例,分析了多相感应电动机内部的电磁关系,建立了多相感应电机二维静、瞬态电磁场考虑边界条件的偏微分方程,并在此基础上,对五相感应电动机的暂、稳态电磁场和电机性能进行计算;分别应用场算和路算方法计算了励磁电感,并与设计值进行对比,结果表明本文所用的电磁场计算方法准确有效。