5446TEU电力系统建模仿真研究

以＂COSCO ROTTERDAM＂轮等5446TEU系列船型作为母型船,建立了物理—数学混合的电力仿真系统。应用计算机仿真技术模拟船舶电力系统的操作功能,并与虚拟配电盘相结合,实现了具有视景和人机自然交互界面的电力仿真系统,该仿真系统已在山东交通学院海运学院大型轮机模拟器上成功运行并取得了满意的效果。     

船用起重机电气改造

本文对工程船起重机的电控系统的现状进行了介绍和分析,针对目前的系统配置和使用过程中存在的问题,提出了采用交流变频电控系统的改造方案,阐述了系统的配置及设备的选型。通过改造,提升了系统操控性和可靠性。     

三电平SVPWM变频调速系统的PSCAD/EMTDC仿真

本文分析了三电平空间矢量脉宽调制的基本原理,应用电磁暂态分析软件PSCAD/EMTDC搭建了基于三电平逆变器的感应电机调速系统模型,实现了电机的矢量控制。仿真结果证明了该方法的有效性。     

基于矢量控制的带式输送机能耗控制方法研究

带式输送机系统是散货码头的重要组成部分,而感应电机作为最重要的驱动组成,其运行效率不高,导致了电力能源的浪费.本文从感应电机转子磁场定向角度出发,建立了一种考虑铁损的感应电机新模型,并提出了最大效率矢量控制策略.通过检测或估计电机的电流信号,使得电机运行于最优效率点,从而提高带式输送机系统的整体效率.最后仿真模拟了该控...     

中控交通综合管理信息系统在高速公路运营管理中的应用

中控交通综合管理信息系统以HIMS为依托,能完成对各种设备,交通事故统计等进行管理,生成对应的报表,系统基于.NET Framework环境,C#语言开发,采用分层架构设计,加入ASP.NET 2.0、Sql Server 2000、AJAX、NHibernate等技术,最终给用户提供简单易懂的管理界面,可以满足高速公路日常运营的无纸化办公管理.     

多气门屋顶型燃烧室发动机动态网格生成方法研究

以具有屋顶型燃烧室的四气门汽油机MV377为例,结合改进的KIVA3V程序,提出了一种适应于该类型燃烧室的分块结构化网格划分策略及相应的动态网格调整方法,并基于该方法所生成的网格完成了汽油机缸内流动过程瞬态数值计算.结果表明用该方法能保证网格生成质量,满足计算精度要求.     

LMS自适应滤波器的FPGA实现

LMS自适应滤波器是一种广泛使用的数字信号处理算法,对其实现有多种方法.通过研究其特性的基础上,提出了在FPGA中使用软处理的嵌入式实现方案,文中对实现方式的优缺点进行了分析,并给出了硬件实现中的有线字长效应进行了详细的分析.     

轻骨料导电混凝土面层的升温与化冰实验研究

采用导电性好的炭黑轻骨料导电混凝土作为混凝土面层的表层,研究了该混凝土面层在模拟低温环境下的升温和化冰与输入电功率的关系.输入电功率较大时,在相同的低温、相同的时间内面层表面温度较高.在路面结冰不超过3 mm且环境温度分别为-10～-5℃,-15～-10℃,20～-15℃时,导电混凝土层基本满足要求的电功率分别应为400,500,600W/m2.炭黑轻骨料导电混凝土在多次通电过程中电阻稳定,因而电功率稳定.     

Investigation on transient dynamic behaviors of low-tension undersea cables

This paper presents a numerical analysis of the dynamic transient behaviors of undersea cables. In this numerical study, the governing equations based on Euler-Bernoulli beam theory are adopted, and they can satisfy many applications no matter what the magnitude of the cable tension is. The nonlinear coupled equations are solved by a popular central finite difference method, and the numerical results of transient behaviors are presented when several kinds of surrounding conditions, such as different towing speeds of surface vessel, different currents and waves with various frequencies and amplitudes, are exerted. Then a detailed comparison of the results, including the upper end tension and cable shape in time-domain, is made under the above external excitations, and finally the possible reasons for these are further explained.     

Determination of interfacial heat flux of stainless steel solidification on copper substrate during the first 0.2 s

Interfacial heat transfer is a key issue in many solidification processes. In the paper, a novel experimental apparatus has been designed and on this basis, the instantaneous interfacial heat transfer between molten steel or solidified shell and copper substrate during the first 0.2 s has been studied. The investigated parameters include melt superheat, substrate temperature and surface roughness. The results show that the peak value of the interfacial heat flux in the first stage of liquid/solid contact increases with melt superheat and changes slightly with substrate temperature and surface roughness. The interfacial heat flux in the stage of solid/solid contact has a similar trend of slow decrease in most conditions.