Flow Past an Accumulator Unit of an Underwater Energy Storage System:Three Touching Balloons in a Floral Configuration

An LES simulation of flow over an accumulator unit of an underwater compressed air energy storage facility was conducted. The accumulator unit consists of three touching underwater balloons arranged in a floral configuration. The structure of the flow was examined via three dimensional iso surfaces of the Q criterion. Vortical cores were observed on the leeward surface of the balloons. The swirling tube flows generated by these vortical cores were depicted through three dimensional path lines. The flow dynamics were visualized via time series snapshots of two dimensional vorticity contours perpendicular to the flow direction; revealing the turbulent swinging motions of the aforementioned shedding-swirling tube flows. The time history of the hydrodynamic loading was presented in terms of lift and drag coefficients. Drag coefficient of each individual balloon in the floral configuration was smaller than that of a single balloon. It was found that the total drag coefficient of the floral unit of three touching balloons, i.e. summation of the drag coefficients of the balloons, is not too much larger than that of a single balloon whereas it provides three times the storage capacity. In addition to its practical significance in designing appropriate foundation and supports, the instantaneous hydrodynamic loading was used to determine the frequency of the turbulent swirling-swinging motions of the shedding vortex tubes; the Strouhal number was found to be larger than that of a single sphere at the same Reynolds number.     

Organization of urban mass transport in developing countries

The supply of mass transport has not kept pace with the demand in cities in developing countries due to rapid urbanization and severe resource constraints. Developing countries would benefit from a study of the experience in developed countries regarding organization of mass transport and may adopt a few of the successful techniques. Examples include: unified transport authority; intermodal transfer facilities; subsidy to public transport; light rail transit; and redevelopment of the area around main rail terminals. Developing countries would be able to implement most of these techniques. The possible contribution of developed countries to developing countries lies mainly in the area of rolling stock and advanced signalling for rail based urban transport and in training highly skilled manpower for operation and management.     

Creative nodes,logistical networks,and the future of the metropolis

A paradigmatic shift away from traditional quantitative methods towards qualitative dynamic analysis is proposed in order to fully comprehend the future of the metropolis. Over the last millennium the great structural changes of production, location, trade, culture and institutions have most likely been triggered by slow but steady changes to those logistical networks which are responsible for the movement of key factors of production. Nonlinear dynamic methods such as catastrophe theory and synergetics can help to provide the necessary analytical insights. Creativity and accessibility to logistical networks are portrayed as important catalysts of qualitative change. requests for offprints     

Optimal roll control of an articulated vehicle: theory and model validation

This paper investigates optimal roll control of an experimental articulated vehicle. The test vehicle and the mathematical model used to design the control strategies are presented. The vehicle model is validated against experimental data from the test vehicle in passive configuration. The initial controller design, performed by Sampson (Sampson, D.J.M. and Cebon, D., 2003a, Achievable roll stability of heavy road vehicles. Proc. Instn. Mech. Engrs, Part D, J. Automobile Engineering, 217(4), 269-287), is reviewed and adapted for the experimental vehicle. The effect of not controlling all the axles on the vehicle is investigated and a variable vehicle speed controller is designed by interpolating between constant speed controllers. Substantial reduction in normalized load transfer is achieved for a range of manoeuvres, both in steady-state and transient conditions.     

Fueling Control of Spark Ignition Engines

Presented in this paper is an adaptive, model based, fueling control system for spark ignition-internal combustion engines. Since the fueling control system is model based, the engine maps currently used in engine fueling control are eliminated. This proposed fueling control system is modular and can therefore accommodate changes in the engine sensor set such as replacing the mass-air flow sensor with a manifold air pressure sensor. The fueling algorithm can operate with either a switching type O 2 sensor or a linear O 2 sensor. The fueling control system is also parceled into steady state fueling compensation and transient fueling compensation. This feature provides the distinction between fueling control adaptation for transient fueling and steady state fueling. The steady state fueling compensation utilizes a feedforward controller which determines the necessary fuel pulsewidth after a throttle transient to achieve stoichiometry. This feedforward controller is comprised of two nonlinear models capturing the steady state characteristics of the fueling process. These models are identified from an input-output testing procedure where the inputs are fuel pulsewidth and mass-air flow signal and the output is a lambda signal. These models are adapted via a recursive least squares method to accommodate product variability, engine aging, and changes in the operating environment. The transient fueling compensation also utilizes a feedforward controller that captures the essential dynamic characteristics of the transient fueling operation. This controller is measured using a frequency domain system identification approach. This proposed fueling control system is demonstrated on a Ford 4.6L V-8 fuel injected engine.     

Private sector involvement in urban rail: Experience and lessons from South East Asia

Various models for competition and ownership of urban rail systems have been used in South East Asia cities since the early 1990s. The paper reviews and classifies the approaches used in Bangkok, Kuala Lumpur, Manila and Singapore. The planning, financing, procurement, implementation and operation of these systems, and the institutional context for them, are examined. All of the systems that have used private sector finance for the development of the initial systems have faced financial problems. Optimism bias in demand forecasts and unrealistic expectations for cost recovery of capital intensive systems have been contributing factors. Lessons to be learned include the importance of clear government leadership and sound institutional arrangements, and the need for improved understanding of the best manner in which the private sector can be used to achieve efficient and effective rail projects.     

Complementing distance based charges with discounted registration fees in the reform of road user charges: the impact for motorists and government revenue

The call for a congestion charge is getting louder and more frequent in many countries as major metropolitan areas experience increasing levels of road congestion. This is often accompanied by a recognition that governments need to find new sources of revenue to maintain existing road networks and to invest in new transport infrastructure. Although reform of road pricing is almost certain to occur at some time in the future in a number of countries, a key challenge is in selling the idea to the community of road users as well as a whole raft of interest groups that influence the views of society and politicians. Simply announcing a need for a congestion charge (often misleadingly called a tax) does little to progress the reform agenda. What is required is a carefully structured demonstration of what might be done to progressively introduce adjustments in road user charges that are seen as reducing the costs to motorists while ensuring no loss of revenue to government. In this paper we show, in the context of Sydney (Australia), that this can be achieved by the reform of registration fees in the presence of a distance-based charging regime that can deliver financial gains to motorists, with prospects of revenue growth to the State Treasury.     

Liner freight rates,discrimination and cross-subsidization

This paper reviews some of the current literature concerning liner freight rates. While upholding the traditional basis for the establishment of freight rate structures it disputes some of the arguments that discrimination or differential pricing policies lead to cross-subsidization of low rated by higher rated cargoes.