Scheduling short-term marine transport of bulk products

A multinational company uses a personal computer to schedule a fleet of coastal tankers and barges transporting liquid bulk products among plants, distribution centres (tank farms), and industrial customers. A simple spreadsheet interface cloaks a sophisticated optimization-based decision support system and makes this system useable via a varity of natural languages. The dispatchers, whose native language is not English, and some of whom presumably speak no English at all, communicate via the spreadsheet, and view recommended schedules displayed in Gantt charts both internationally familiar tools. Inside the spreadsheet, a highly detailed simulation can generate every feasible alternate vessel employment schedule, and an integer linear set partitioning model selects one schedule for each vessel so that all loads and deliveries are completed at minimal cost while satisfying all operational requirements. The optimized fleet employment schedule is displyed graphically with hourly time resolution over a planning horizon of 2-3 weeks. Each vessel will customarily make several voyages and many port calls to load and unload products during this time.     

Empirical approaches to combining revealed and stated preference data: Some recent developments with reference to urban mode choice

This paper replaces the nested logit ‘trick’ used in estimation of a modal choice model, when stated preference (SP) and revealed preference (RP) data are pooled, with an error component mixed logit model that can (i) relax the IID condition attached to subsets of alternatives in nested logit models, (ii) accommodate correlated observations, and (iii) reveal the relevant scale parameter for subsets of alternatives. Such a model can also incorporate state dependence between data types and preference heterogeneity on observed attributes. An example of choice among bus, train and car modes illustrates the difference in empirical evidence, especially elasticity outputs.     

Interval estimation in the calibration of certain trip distribution models

This paper argues for interval, rather than point, estimation when calibrating some variants of the trip distribution “gravity” models. Analytic expressions are derived for the approximate asymptotic covariances of least squares and maximum likelihood estimates of the parameters in the impedance function under a variety of conditions. A comparative numerical example, and an application using migration flows, are also presented.     

Bus congestion, optimal infrastructure investment and the choice of a fare collection system in dedicated bus corridors

Microeconomic optimisation of scheduled public transport operations has traditionally focused on finding optimal values for the frequency of service, capacity of vehicles, number of lines and distance between stops. In addition, however, there exist other elements in the system that present a trade-off between the interests of users and operators that have not received attention in the literature, such as the optimal selection of a fare payment system and a designed running speed (i.e., the cruising speed that buses maintain in between two consecutive stops). Alternative fare payment methods (e.g., on-board and off-board, payment by cash, magnetic strip or smart card) have different boarding times and capital costs, with the more efficient systems such as a contactless smart card imposing higher amounts of capital investment. Based on empirical data from several Bus Rapid Transit systems around the world, we also find that there is a positive relationship between infrastructure cost per kilometre and commercial speed (including stops), achieved by the buses, which we further postulate as a linear relationship between infrastructure investment and running speed. Given this context, we develop a microeconomic model for the operation of a bus corridor that minimises total cost (users and operator) and has five decision variables: frequency, capacity of vehicles, station spacing, fare payment system and running speed, thus extending the traditional framework. Congestion, induced by bus frequency, plays an important role in the design of the system, as queues develop behind high demand bus stops when the frequency is high. We show that (i) an off-board fare payment system is the most cost effective in the majority of circumstances; (ii) bus congestion results in decreased frequency while fare and bus capacity increase, and (iii) the optimal running speed grows with the logarithm of demand.     

Mobility, social exclusion and well-being: Exploring the links

Building on a growing research foundation, transport policy makers have begun to associate the ability to be mobile with having a role in the facilitation of social inclusion. However, the further connection to well-being is not as well understood. This paper explores the association between a person’s travel patterns, their risk of social exclusion and self-assessed well-being. Key influences on social exclusion are discussed, with trip making emerging as a significant influence. Trip making is not a significant direct influence on well-being but does exercise an indirect influence through the impact on risk of social exclusion. The modelling process enables a value for additional trips to be estimated, the value being about four times the values derived from conventional generated traffic approaches. Similar high values are found in separate metropolitan and regional case studies, confirming the significance of the results.     

A Modular Computer Model for the Design of Vehicle Dynamics Control Systems1

This paper describes a multiport approach to computer-aided modeling of vehicle dynamics. The modeling approach produces models that are suitable for the interactive design and evaluation of complex control strategies. The vehicle model which can be used for ride and handling analysis, is built from modular components. The components are programmed using the syntax of the computer aided control system design (CACSD) program EASYS. Seven modeling components are used to create a three-dimensional vehicle dvnamics model. The model is flexible enoug-h to simulate any suspension design with revolute joints.

Each component of the model consists of a FORTRAN subroutine and a main calling module called a macro. To simplify the process of model building, the modeling components in the car model are designed to represent physical elements, such as the spring, damper, link or tire. To create a model, the components, which are represented by blocks, are interconnected through points, located on the blocks, called pons. These ports have been designed to simulate the location of the connection points between the physical elements, as observed in real systems. The construction of multibody models within a CACSD program offers the flexibility of simultaneous interactive simulation of the three-dimensional dvnamics and evaluation of the desien of the controls.

Although modeling of multibody systems using FORTRAN components has been pioneered by Chace, Haug and Orlandea; and bond graph modeling of multibody systems has been investigated by Bos, this approach is novel because:-

The model is included in the control system design program (EASYS). This arrangement allows the designer to exploit the advanced control design tools available in the program. Furthermore, this approach significantly reduces the computation time required for running the model after parameters modification.

The model is built from components that are interconnected by ports which represent the actual physical location of the connection points between the elements. The multiport approach simplifies the model building process for multibody systems. This simplification is achieved by reducing the model of a multibody system to a block diagram form.     

法国新一代高速列车AGV

介绍了法国新一代高速列车AGV，该车采用动力分散方式和铰接式转向架、涡流制动等技术，具有较好的运行性能。     

Application of new parameterizations of gas transfer velocity and their impact on regional and global marine CO2 budgets

One of the dominant sources of uncertainty in the calculation of air–sea flux of carbon dioxide on a global scale originates from the various parameterizations of the gas transfer velocity, k, that are in use. Whilst it is undisputed that most of these parameterizations have shortcomings and neglect processes which influence air–sea gas exchange and do not scale with wind speed alone, there is no general agreement about their relative accuracy.The most widely used parameterizations are based on non-linear functions of wind speed and, to a lesser extent, on sea surface temperature and salinity. Processes such as surface film damping and whitecapping are known to have an effect on air–sea exchange. More recently published parameterizations use friction velocity, sea surface roughness, and significant wave height. These new parameters can account to some extent for processes such as film damping and whitecapping and could potentially explain the spread of wind-speed based transfer velocities published in the literature.We combine some of the principles of two recently published k parameterizations [Glover, D.M., Frew, N.M., McCue, S.J. and Bock, E.J., 2002. A multiyear time series of global gas transfer velocity from the TOPEX dual frequency, normalized radar backscatter algorithm. In: Donelan, M.A., Drennan, W.M., Saltzman, E.S., and Wanninkhof, R. (Eds.), Gas Transfer at Water Surfaces, Geophys. Monograph 127. AGU,Washington, DC, 325–331; Woolf, D.K., 2005. Parameterization of gas transfer velocities and sea-state dependent wave breaking. Tellus, 57B: 87–94] to calculate k as the sum of a linear function of total mean square slope of the sea surface and a wave breaking parameter. This separates contributions from direct and bubble-mediated gas transfer as suggested by Woolf [Woolf, D.K., 2005. Parameterization of gas transfer velocities and sea-state dependent wave breaking. Tellus, 57B: 87–94] and allows us to quantify contributions from these two processes independently.We then apply our parameterization to a monthly TOPEX altimeter gridded 1.5° × 1.5° data set and compare our results to transfer velocities calculated using the popular wind-based k parameterizations by Wanninkhof [Wanninkhof, R., 1992. Relationship between wind speed and gas exchange over the ocean. J. Geophys. Res., 97: 7373–7382.] and Wanninkhof and McGillis [Wanninkhof, R. and McGillis, W., 1999. A cubic relationship between air−sea CO2 exchange and wind speed. Geophys. Res. Lett., 26(13): 1889–1892]. We show that despite good agreement of the globally averaged transfer velocities, global and regional fluxes differ by up to 100%. These discrepancies are a result of different spatio-temporal distributions of the processes involved in the parameterizations of k, indicating the importance of wave field parameters and a need for further validation.