Information Management in Beach Planning

Abstract

This article concerns optimizing the use of environmental information for creative planning. It arose from a detailed study of the status and management of the coastal dunes of New South Wales, Australia, and discusses the way in which ideas for optimizing the management process were developed, and applied to three beach environments on the coast of New South Wales, Australia.

The problem of coastal beach/dune management may be thought of as being similar to a production function in which the inputs are the land resource, the skills and knowledge of managers, finance, and materiel. The outcomes are in the form of experiences, or opportunities for experiences, either passive or active, either consumption values or option values, desired by the coastal user population (which includes the resource managers themselves). The resource manager's task is to manipulate the “production function”; in order that the outputs will best mesh with the expectations of the user population and with the capability of the land resource to deliver on a sustained basis. An aim of the project was to develop a method for the specification of different possible outputs from the production function, in different beach/dune environments, and that could be used to assist in the preparation of advice on appropriate recreational development, allowing decisions to be based on both environmental data and information on the expectations, activities, and amenity preferences of beach users.     

Effect of mass ratio on hydrodynamic response of a flexible cylinder

The effect of the mass ratio on the flow-induced vibration (FIV) of a flexible circular cylinder is experimentally investigated in a towing tank. A Tygon tube with outer and inner diameters of 7.9 mm and 4.8 mm, respectively, was employed for the study. The tube was connected to a carriage and towed from rest to a steady speed up to 1.6 m/s before slowing down to rest again over a distance of 1.6 m in still water. Reynolds number based on the cylinder’s outer diameter was 800–13,000, and the reduced velocity (velocity normalized by the cylinder’s natural frequency and outer diameter) spanned from 2 to 25. When connected, the cylinder was elongated from 420 mm to 460 mm under an axial pre-tension of 11 N. Based on the cylinder’s elongated length, the aspect ratio (ratio of the cylinder’s length to outer diameter) was calculated as 58. Three mass ratios (ratio of the cylinder’s structural mass to displaced fluid mass, m*) of 0.7, 1.0, and 3.4 were determined by filling the cylinder’s interior with air, water, and alloy powder (nickel-chromium-boron matrix alloy), respectively. An optical method was adopted for response measurements. Multi-frequency vibrations were observed in both in-line (IL) and cross-flow (CF) responses; at high Reynolds number, vibration modes up to the 3^rd one were identified in the CF response. The mode transition was found to occur at a lower reduced velocity for the highest tested mass ratio. The vibration amplitude and frequency were quantified and expressed with respect to the reduced velocity. A significant reduced vibration amplitude was found in the IL response with increasing mass ratios, and only initial and upper branches existed in the IL and CF response amplitudes. The normalized response frequencies were revealed to linearly increase with respect to the reduced velocity, and slopes for linear relations were found to be identical for the three cases tested.     

Limitation of egg production in Calanus finmarchicus in the field: A stoichiometric analysis

The egg production of marine copepods correlates with a range of variables, including the availability of organic carbon (C), nitrogen (N) and the polyunsaturated fatty acids (PUFAs) 20:5(n−3) (EPA) and 22:6(n−3) (DHA). However, an understanding of which substrates limit egg production in the natural environment has yet to be reached. The quantities of C, N, EPA and DHA ingested, derived from parental biomass, and invested in eggs by female Calanus finmarchicus during a 5-day incubation experiment were examined using stoichiometric theory to determine which substrate was limiting. The majority of each substrate was derived from parental biomass, and therefore the existing stoichiometric theory is developed to include this route of supply. The females were essentially devoid of lipid reserves, as evidenced by the lack of the storage fatty acids 20:1(n−9) and 22:1(n−11), and carbon limitation was predicted under most of the scenarios examined. Nitrogen limitation was only apparent when carbon and nitrogen utilisation efficiencies were assumed to be high (0.5) and low (0.4) respectively. PUFAs were assumed to be utilised with high efficiency (0.9), and were never predicted to limit production. This work highlights the need for a more detailed understanding of the maintenance requirements that marine copepods have for C, N, EPA, and DHA and hence the efficiencies with these substrates can be utilised for growth.     

通过水下储能系统的蓄电池单元的流:三个接触的似花结构的球状物(英文)

An LES simulation of flow over an accumulator unit of an underwater compressed air energy storage facility was conducted. The accumulator unit consists of three touching underwater balloons arranged in a floral configuration. The structure of the flow was examined via three dimensional iso surfaces of the Q criterion. Vortical cores were observed on the leeward surface of the balloons. The swirling tube flows generated by these vortical cores were depicted through three dimensional path lines. The flow dynamics were visualized via time series snapshots of two dimensional vorticity contours perpendicular to the flow direction; revealing the turbulent swinging motions of the aforementioned shedding-swirling tube flows. The time history of the hydrodynamic loading was presented in terms of lift and drag coefficients. Drag coefficient of each individual balloon in the floral configuration was smaller than that of a single balloon. It was found that the total drag coefficient of the floral unit of three touching balloons, i.e. summation of the drag coefficients of the balloons, is not too much larger than that of a single balloon whereas it provides three times the storage capacity. In addition to its practical significance in designing appropriate foundation and supports, the instantaneous hydrodynamic loading was used to determine the frequency of the turbulent swirling-swinging motions of the shedding vortex tubes; the Strouhal number was found to be larger than that of a single sphere at the same Reynolds number.     

Assessing economic activity in coastal areas: A shift‐share approach

Abstract

An essential aspect of economic analysis associated with planning efforts is identifying the composition of existing economic activity and understanding historical trends in economic change. The shift‐share model is a useful and inexpensive tool for this purpose. Shift‐share analysis evaluates changes in local economic activities relative to changes in a reference area (usually the state or nation). Economic change is separated into a reference area component, an industry mix component, and a local share component. These measure, respectively, the effect on the local economy due to changes in the reference area, factors specific to the local mix of industries, and the changing competitive position of the local area relative to the reference area.

A shift‐share analysis of Florida's coastal counties reveals that all grew much faster over the 1965–1975 period than did the national economy. This rapid growth is primarily a result of a net shift of economic activity toward the study area relative to the nation. However, a few coastal counties did exhibit a mix of slow‐growing industries. Specific industry results for Florida counties at the eighty‐industry level reveal that many industries showed significant shifts toward Florida's coastal counties. The performance of individual industries in the coastal counties generally exceeded that of the same industries in noncoastal counties.     

Assessing the economic significance of port activity: evidence from ABP Operations in industrial South Wales

The paper seeks to improve the evidence base surrounding regional ports and their economic impact. The paper reveals that industries dependent on the port infrastructure are actually key regional players, often operating in relatively fast growth sectors, and contributing to the economic and social needs of the local economy. The focus in the case element of the paper is the operations of Associated British Ports (ABP) plc in industrial South Wales. In examining the direct and indirect consequences of the port activity the paper adopts an input–output framework of analysis. A better contextualization of the economic impact of ports is shown to be necessary in the devolved policy-making environment in the region.     

Considering “Coastal Carbon” in Existing U.S. Federal Statutes and Policies

Coastal ecosystems such as mangroves, salt marshes, and seagrasses provide important ecosystem services, including nursery habitat for fish, shoreline protection, and the recently recognized service of carbon sequestration and storage. When these wetland ecosystems are degraded or destroyed, the carbon can be released to the atmosphere, where it adds to the concentration of greenhouses gases (GHGs) that contribute to climate change. Many federal statutes and policies specifically require that impacts on ecosystem services be considered in policy implementation. Yet, no federal statute, regulation, or policy accounts directly for the carbon held in coastal habitats. There are a number of federal statutes and policies for which coastal carbon ecosystem services could reasonably be added to environmental and ecosystem considerations already implemented. We look at a subset of these statutes and policies to illustrate how coastal carbon ecosystem services and values might affect the implementation and outcomes of such statutes generally. We identify key steps for the inclusion of the ecosystem services of coastal habitats into the implementation of existing federal policies without statutory changes; doing so would increase the degree to which these policies consider the full economic and ecological impacts of policy actions.     

Fatigue life prediction of welded ship details

Ship structures are submitted to variable cyclic loading during navigation. The cyclic motion of waves induces variable and complex loadings in the structure, which could generate fatigue damage. Moreover, most of these metallic structures are welded assemblies. This technique generates local stress concentrations at the weld toe, which becomes a critical area regarding fatigue. In previous works, a methodology to predict fatigue life was developed and tested on butt-welded and cruciform joints. The present work focuses on other welded assemblies in order to extend fatigue crack initiation life evaluation to a wider range of ship details. The strategy could be split into two steps. First, a finite element calculation is performed under constant or variable amplitude loadings, in order to analyze the elastic shakedown of the structure. To characterize the material heterogeneity of the welded joint, experimental tests together with micro-hardness measurements, are performed on a simulated heat-affected zone. If there is a shakedown in the structure, a post-treatment is applied to predict the fatigue crack initiation. It is based on a two-scale damage model, initially developed by Lemaitre et al. and again includes the heterogeneity of fatigue properties. To validate this methodology, some experimental tests have been performed on welded assemblies which are typical of shipbuilding applications, using a fatigue machine. These comparisons between experimental and numerical fatigue lives are encouraging.