办公自动化环境下公文管理的Petri网模型

办公自动化系统是实现企业内部各部门之间办公信息的收集与处理、流动与共享、实现科学决策的信息系统.公文管理作为企业办公自动化系统的核心涉及到几乎所有的部门,文中在分析公文管理特点的基础上,以Petri网为描述手段,建立了企业办公自动化环境下收发文过程的Petri网模型,并利用矩阵方程对其进行了相关的分析和验证.     

沥青玛蹄脂混合料的高温性能影响因素分析

沥青玛蹄脂混合料作为良好的钢桥面铺装层材料,其高温性能一直是关注的焦点,本文基于室内车辙试验研究了其高温性能影响因素,重点分析了荷载和温度、拌合时间及加铺SMA对沥青玛蹄脂混合料的高温性能指标动稳定度的影响规律,为今后玛蹄脂混合料的路用实践提供了借鉴.     

Dynamic Estimation of Road Bank Angle

Road bank angles have a direct influence on vehicle dynamics and lateral acceleration measurement. A vehicle stability control system that knows road bank angle has an advantageous capability in achieving desired control sensitivities for maneuvers on ice and snow, among all surfaces, while avoiding false/nuisance activation on a banked road. Since neither lateral velocity nor road bank angle are directly measurable in current vehicle systems due to economical reasons, the major challenge is to differentiate the bias induced by road bank disturbances from actual effect of vehicle lateral dynamics in current measurements. This paper proposes a method of road bank estimation and provides theoretical background for the decoupling effort of lateral dynamics and road disturbances involved in bank estimation.     

Information needs of the continuing urban transportation planning process

Urban transportation is identified as a functional element in the broader context of urban facilities and services. From this point of view, the relative merits of separate information systems for transportation planning and general urban planning, as contrasted to unified systems for all urban management functions, are discussed. The overriding need to make the most effective use of urban resources argues strongly for the unification of urban information systems to the greatest possible extent consistent with the special data requirements of various functional programs. The need to identify and correlate data items for very small areal units and to keep current records of the constantly shifting patterns of social and economic activities in urban areas present difficult, but not insurmountable technical problems. However, the most serious barrier to the development and implementation of comprehensive urban information systems is concluded to be institutional, rather than technical, in nature.     

Fuzzy Logic Active and Semi-Active Control of Off-Road Vehicle Suspensions

For off-road vehicles, minimizing the absorbed power is the main objective of suspension control. The primary cause of increase in the absorbed power in off-road vehicles driven at high speeds on harsh courses is the exhaustion of the suspension travel. Fuzzy-logic approach to active and semi-active off-road vehicle suspension control, with the goal of improving the speed of the vehicle over rough terrains are developed. The ride metric used for quantifying improvements is the absorbed power of the sprung mass. Particular attention is paid to the proper modeling of the suspension using both the full kinematic constraints and the more convenient two degree of freedom linear model of the quarter vehicle suspension. The nonlinearities due to the kinematic constraints on motion are accounted for by modifying the stiffness and damping coefficients of the suspension spring and dashpot in the linear model. The control laws are developed using the less complex model and demonstrated in the fully constrained environment. Nonlinearities of the suspension, including tire stiffness/damping and bumpstops are included at all stages of controller development.     

Design Synthesis of a Vehicle Suspension System Using Multi-Parameter Qptimization

The transmission of road-generated vibrations into a vehicle body is treated as a source-path-receiver problem. The suspension system acts as the path, and improved isolation can be achieved by having a single compliant bushing at the connecting point of the shock absorber to the body with none at the other end. A mathematical model is derived for such a system which would enable detailed parameter investigation to be undertaken using the gradient method of optimization. An expression for the absolute displacement transmissibility of the body is derived and the optimization procedure is applied in order to evaluate the optimum values of the non-dimensional variables involved. This minimizes the maximum motion transmitted to the body from the road surface over a broad frequency range. Design data which are presented non-dimensionally for parameter variations show the influence of three variables: the bushing stiffness, the resonant frequency ratio and the damping coefficient upon the transmissibility.     

Engine performance and toxic gas analysis of biobutanol-blended gasoline as a vehicle fuel

A comprehensive study evaluating the performance of biobutanol-blended gasoline in passenger cars was conducted because biobutanol is considered a better biofuel than bioethanol as it has no water solubility and it has a higher caloric value, giving it a higher energy value. Several kinds of samples—suboctane gasoline, 8 volume percentage and 16 volume percentage biobutanol—blended gasoline, and a 10 volume percentage MTBE-blended market sample (as the oxygencontaining gasoline)-were tested to evaluate the engine performance in terms of the detergency of the intake valves and combustion chambers, power, emissions, and fuel efficiency. Additionally, the toxicity of the emissions from these biobutanolblended samples was tested in order to assess the viability of biobutanol as one of the competitive potential substitutes for MTBE as an oxygenator in the near future. The results show that biobutanol-blended gasoline samples had relatively better detergency, relatively higher power, and similar levels of emissions compared with those of MTBE-blended gasoline. Formaldehyde was emitted from all of the samples at almost the same levels and within the error range, whereas biobutanolblended gasoline samples emitted approximately three times the amount of acetaldehyde than did the suboctane gasoline. This study shows that biobutanol is one of the best alternative bioalcohol fuels for use in the near future.     

Devising business strategy for railways

This paper presents a case study which tackles a general problem for railway management, namely the formulation of a strategy to improve business financial performance. This is prefaced, in Section 2, by discussion of general principles - concerning the type of information system required, investigations to be conducted and associated measurement needs. The case study, of Section 3, concerns our investigations of VicRail's total business and its constituents. The task of financial improvement is revealed from an assessment of sectors' current cost-recovery positions and the identification of system joint costs. For freight sectors, future traffic prospects, pricing possibilities and the scope for more efficient operations are then considered, and the implications traced for overall deficit reduction and the development of business strategy. The concluding section draws some general lessons for railway managements.A fuller discussion by the authors of the theoretical framework employed, and particularly of the case study application, is contained in a complimentary publication: Improving Railway Financial Performance, published by Gower in January 1985.Transmark is a subsidiary of the British Railways Board, acting as its international consultancy. The authors, who were respectively study director and manager, wish to thank Bernard Warner (an independent consultant), Richard Eccles (of Transmark) and Adrian Balkyn-Rackowe (of British Rail) for their valuable contributions. The study report, titled Rail Cost — Pricing Options, was released by the Minister in April 1981.     

A reduced-gravity model of the Catalan Sea

A reduced-gravity model is used to study the effects of the wind on the upper layer circulation in the Catalan Sea. The model parameters were set by observed features of the circulation in the basin. It is shown that the results are particularly sensitive to the open sea boundary conditions. Simulations were done using the following boundary fluxes: (i) mean values estimated by Bethoux (1980) and (ii) more recent geostrophic transports computed from hydrographic data by Font et al. (1988). The latter seem to lead to more realistic circulation patterns. The influence of seasonal winds (climatological data) on the dynamics is clear, especially during the winter.     

Growth of urban transportation: Peoples republic of China

The Peoples Republic of China, with its great urban populations, is finding it necessary to develop a range of strategies to deal with increasing demand for goods and people movement, increasing motorization and the increasing congestion that results from the increasing travel demand. This paper discusses strategies being adopted in two northern cities, Changchun and Shenyang. Both transit and roadway programs are examined for Changchun. Problems and successes of a new toll road are examined for Shenyang. Sustained infrastructure investment is essential to assure the necessary mobility for economic growth.