Robust optimization design method for powertrain mounting systems based on six sigma quality control criteria

This paper presents a robust optimization design method based on Six Sigma quality control criteria to improve the design of a powertrain mounting system (PMS). The powertrain is modeled as a rigid body having six degrees of freedom (DOF) connected to a rigid base by four rubber mounts, and each mount is simplified as a three-dimensional spring-damper element in its local coordinate system (LCS). The calculation method based on energy decoupling is used to estimate the decoupling ratios of a PMS. The location and static stiffness of each mount and the orientations of the two anti-torsion mounts are selected as uncertain design variables, and the nominal values of these design variables are optimized to obtain a robust Six Sigma design for a PMS. The uncertain design variables are characterized by a perturbation or percent variation around their nominal values. The generalized reduced gradient (LSGRG2) optimization method is employed to solve the robust optimization problem, and a second-order Taylor series expansion is used to estimate the statistical properties of the performance constraints and objectives. The optimization results show that the robust design ensures good robustness or high reliability for the natural frequencies, decoupling ratios, and frequency separation constraints of a PMS.     

Simple estimation of high-frequency radiation from a muffler shell

The acoustic design of exhaust mufflers has mainly focused on reducing the discharge noise from the tailpipe. However, the noise that is transmitted through the muffler jacket and the endplate becomes important since the muffler reduces the amount of discharge noise when it has an optimized design. It is known that the contribution to the overall exhaust noise of the muffler shell is significant in the mid- and high-frequency ranges. The current problem is that there are no appropriate computational tools at high frequencies. A simple method to analyze the 1/3-octave band of sound radiating from an arbitrary shape (like a muffler) was employed to predict the band spectrum of the radiated noise. The calculation method included formulating the boundary integral, which was modified into a quadratic form in order to enable the prediction of the intensity levels in a band analysis. Monopole and dipole source terms in the conventional BEM were transformed into the auto- and cross-spectra of the two vibrating sources, in which the cross-spectra could be eventually omitted by assuming that the correlation coefficients were negligible. The method was adopted in an abrupt calculation of the shell noise in 1/3-octave band levels without nonuniqueness problem. In comparison with the measured data, the simulation result showed roughly 3-dB errors at most of the field points, excluding several special points that were normal to the shell and exhibited a maximum 5-dB error.     

Modeling,parameter estimation and nonlinear control of automotive electronic throttle using a Rapid-Control Prototyping technique

An electronic throttle consists of a DC motor, spur gears, a return spring, a position sensor, power electronics and an electronic control unit. Fast and precise position control of this electromechanical system is relatively difficult due to very high friction and the strong nonlinearity of the spring. Simple application of linear control, such as PID, fails. In this paper, two new controller structures suitable for different reference signal types are described. The key component of the position controller is the friction compensator based on either/both feedforward or feedback principles. The quality of the resulting behavior was measured using several criteria including the measure of control activity around the equilibrium position. The control activity directly influences the vibration, the noise and the wear of the servo system. The proposed controllers demonstrated superior behavior compared with other published structures.     

多种交通方式下的城市空间分配

从集计角度分析了运行多种交通方式的城市交通系统。利用目前已受关注的宏观基本图（简称MFD）,描述城市交通的整体特性。以旧金山某区为例,使用现有数据,通过仿真论证如何应用MFD监管真实交通网络。然后讨论了同一路网中不同交通方式间如何相互作用,以及如何将这些作用纳入包含多种交通方式路网的MFD。研究得到的两个主要结论是：1）证实了已有研究猜想——对市区拥挤区域限行,可提高包括被限行者在肉的所有出行者的机动性;2）公交方式提供专用道路空间可提高所有交通方式的可达性。     

Rail infrastructure,ITS and access charges

This paper presents an overview of the principles and technologies relating to railway infrastructure. Specifically this paper includes rail–wheel contact, inspection and maintenance of rail. Intelligent transport systems (ITS) and their applications for the purposes of the railway transport in Europe are discussed. The potential, levels of development, technological and operational characteristics of the European Railway Traffic Management System (ERTMS) are presented. Finally, a discussion on methodologies, principles and current practices for access charging in Europe is provided.     

Numerical prediction of the modal response of flexible cylinders in cross-flow with a current dependent form of damping

A quadratic eigenvalue problem (QEP) was posed in order to study the dynamics of flexible cylinders in cross-flow, simulating slender offshore structures such as risers, catenaries or tendons. The Euler–Bernoulli equation was used to model the structure assuming a fluid loading model, and yielding a quadratic eigenvalue problem that included a form of damping dependent not only on the structural damping itself, but also on the free stream velocity and the fluid force coefficients. We solved the QEP using the finite element method. We also derived a simplified analytical solution in this work for comparison with the QEP, however this solution does not consider changes in tension along the length of the cylinder as the QEP does. In our study, the QEP solutions were first validated against the simplified analytical solution, and also against a well-known experimental dataset obtained in 2003, in which a flexible circular cylinder model was used to model the dynamics of a riser undergoing multi-mode vortex-induced vibrations.     

EFD and CFD for KCS heaving and pitching in regular head waves

The KCS container ship was investigated in calm water and regular head seas by means of EFD and CFD. The experimental study was conducted in FORCE Technology’s towing tank in Denmark, and the CFD study was conducted using the URANS codes CFDSHIP-IOWA and Star-CCM+ plus the potential theory code AEGIR. Three speeds were covered and the wave conditions were chosen in order to study the ship’s response in waves under resonance and maximum exciting conditions. In the experiment, the heave and pitch motions and the resistance were measured together with wave elevation of the incoming wave. The model test was designed and conducted in order to enable UA assessment of the measured data. The results show that the ship responds strongly when the resonance and maximum exciting conditions are met. With respect to experimental uncertainty, the level for calm water is comparable to PMM uncertainties for maneuvering testing while the level is higher in waves. Concerning the CFD results, the computation shows a very complex and time-varying flow pattern. For the integral quantities, a comparison between EFD and CFD shows that the computed motions and resistance in calm water is in fair agreement with the measurement. In waves, the motions are still in fair agreement with measured data, but larger differences are observed for the resistance. The mean resistance is reasonable, but the first order amplitude of the resistance time history is underpredicted by CFD. Finally, it seems that the URANS codes are in closer agreement with the measurements compared to the potential theory.     

Are Longer and Heavier Vehicles (LHVs) Beneficial for Society? A Cost Benefit Analysis to Evaluate their Potential Implementation in Spain

Abstract

In this paper we carry out a thorough review of the current research related to the benefits and costs arising from the implementation of longer and heavier vehicles (LHVs). From this review we concluded that despite the many studies available, little has been said about the sensitivity of the benefits and costs to the ultimate performance of the key variables related to the evolution of the economy, road transport performance, safety, and so on. In order to fill this gap, we have designed a sensitivity approach based on a cost benefit analysis tool to determine which variables demonstrate the greatest influence on the benefits and costs stemming from the implementation of LHVs. In order to test the methodology, we have used it in an analysis of the Spanish trunk network. The results show that the benefits of LHVs for society are significant. Even in the least favorable scenario, the economic benefits are greater than €3500 million over 15 years, and the environment enhanced as well, for CO₂ emissions are reduced by 2 Million tonnes. Overall we noted how the results are not very sensitive to the evolution of key variables in determining the final outcome. However, we found that the variables that have the greatest affect on the final benefit, such as traffic growth and social discount rate, depend basically on the performance of the overall economy. Moreover, the private cost for haulers seems to be more important in determining the final benefit than externality costs.     

A Modeling Framework for Bus Rapid Transit Operations Evaluation and Service Planning

Abstract

In this paper, we present a dynamic traffic assignment-simulation modeling framework (DYNASMART-P) to support the evaluation and planning of Bus Rapid Transit (BRT) services in urban transportation networks. The model represents the different characteristics associated with BRT operations such as: exclusive right-of-way lanes, limited-stop service, signal prioritization at congested intersections, and enhanced bus stops to reduce passenger boarding times. A set of simulation experiments is conducted using the model to study the impact of introducing a hypothetical BRT service in the Knoxville area in the State of Tennessee. In these experiments, the different operational characteristics of BRT are evaluated in terms of potential impact on transit ridership and on the interacting auto traffic. The results illustrate the advantages of BRT for increasing transit ridership and improving overall system performance.     

Optimization of Fare Structure and Service Frequency for Maximum Profitability of Transit Systems

Abstract

Providing efficient public transportation has been recognized as a potential way of alleviating congestion, improving mobility, mitigating air pollution, and reducing energy consumption. Many people use public transportation systems for their daily commute, while others use different transportation modes (e.g. cars, taxis, carpools, etc.). Inexpensive fares with good transit service encourages ridership, and the resulting revenue may be used to provide better service. Optimization of transit service frequency and its associated fare structure is desirable in order to increase revenue at reasonable transit operating expenditure. The objective of the study reported here is to maximize profit subject to service capacity constraint, while elastic demand is considered. The solution methodology is developed and applied to solve the profit maximization problem in a case study based on Newark, NJ, USA. Numerical results, including optimal solutions and sensitivity analyses, are presented. It is found that an optimal temporal headway and differential fare structure that maximizes total profit for the studied subway system can be efficiently solved.