Review of empirical and semi-empirical Y factor solutions for cracked welded tubular joints

The practical use of fracture mechanics has been established for use on large turbine and electric generator rotor components used in the atomic power generation and the aircraft industry. Application areas in the offshore industry have also been identified. Fracture mechanics is currently used at the design stage of offshore facilities. It provides the basis for fatigue life prediction, steel selection and tolerance setting on allowable weld imperfections. Fracture mechanics is also used during the operational stage of a structure to make important decisions on inspection scheduling and repair strategies and as a tool for establishing limits on operational conditions. Linear elastic fracture mechanics relies on the use of the stress intensity factor concept. The stress intensity factor is a very important fracture mechanics parameter. Therefore, the accuracy of any fracture mechanics model for the prediction of fatigue crack growth in offshore structures for example will depend very much on the accuracy of the stress intensity factor solution used. Several empirical and semi-empirical solutions have been developed over the years with varying degrees of accuracy. This paper presents a review of some of these methods and attempts to assess their accuracy in predicting Y factors for welded tubular joints by comparing predicted results with experimental data obtained from fatigue tests conducted on large scale welded tubular joints. The experimental results were conducted under simulated service conditions, using a jack-up offshore standard load history (JOSH). A comparison between the experimental and predicted results shows that there may be other factors, which influence fatigue crack growth under variable amplitude conditions. Some of these factors have been identified and discussed in this paper.     

Efficiency of routing and scheduling system for small and medium size enterprises utilizing vehicle location data

The routing and scheduling for trucks and vans in an urban road network depends critically on the state of the road network. Trucks and vans impose significant costs on other road users and the environment, so improved routing and scheduling benefits more than just the logistics industry. However, small and medium size enterprises (SMEs) in the logistics business cannot justify investment in planning systems. In this paper, an autonomous routing and scheduling system which is available to SMEs is proposed and the efficiency of the system is investigated. The proposed system accumulates vehicle location data in a central server and uses it to generate traffic information. Test simulations using a grid network demonstrate the effects of utilizing and sharing vehicle location data on delivery efficiency. The simulation results show that the improvement of delivery efficiency is mainly due to the reduction of penalty cost for early and late arrival at the customer location. It is also shown that the system leads to the buffer effect from variations in traffic conditions on delivery cost and this effect is enhanced by taking travel time uncertainty into consideration. It is further shown that the presence of measurement periods with insufficient data results in unreliable routing and scheduling. For a reliable system, data collection over a wider area is required rather than dense data in a subset of links.     

Optical device for measuring the injectors opening in common rail systems

Since the needle displacement exerts a fundamental influence on the operation of Common Rail injection systems, accurate measurements of the control piston position can be crucial for a more thorough analysis of the behaviour of injectors, in particular when multiple injections are employed. Eddy current sensors have traditionally been used in lab activities to measure the control piston position inside injectors; apart from the high cost, the scientific literature clearly shows their inadequacy, which is mainly due to the presence of electromagnetic disturbance: the current pulse, which controls the opening of the injector, generates electromagnetic fields which strongly affect the acquisition of data. Many attempts have recently been made either to solve the interference occurring during such measurements or to propose alternative displacement transducers whose operation is not influenced by electromagnetic interference. In this paper, a new device for measuring the injector opening is proposed: it is an optical transducer characterized both by simple and very cheap construction and by a reliable physical principle for measuring the control piston lift. The reliability of the proposed sensor is assessed by a thorough experimental campaign and by comparing the experimental results with the numerical predictions achieved by a Common Rail injector model. Since the assembly of the optical sensor does not affect the injector operation, it can efficiently be used both for experimental tests and for on-board diagnosis and monitoring of the injector operation.     

Method of estimating human error probabilities in construction for structural reliability analysis based on analytic hierarchy process and failure likelihood index method

Partial safety factors must be evaluated precisely for the given target reliability index to ensure the certain level of structural reliability due to uncertain factors. The current studies of partial safety factors do not consider human error in construction for structural reliability. A mathematically model should be improved to simulate the partial safety coefficient concerned uncertainty factors which concern the effect of human error in construction. We employ the contaminated distribution to obtain the realistic mean value and standard variance of variable of structural parameters which coexist with random error human error. The reasonable partial safety coefficient can be calculated based on the realistic value of structural parameters concerned the effects of random error and gross error.     

Public sector comparators for UK PFI roads: inside the black box

A public sector comparator (PSC) represents the hypothetical, risk-adjusted cost of a project—such as a road scheme—when that project is financed, owned and implemented by government. A PSC is commonly used in public procurement decision-making as a yardstick against which private investment proposals are evaluated. Using original material released by the UK Highways Agency for the first time, the author recreated the PSCs used for the evaluation of the first eight road projects to be promoted under the UK’s private finance initiative (PFI). Alternative assumptions regarding project risks were modelled using different levels of optimism-bias uplift, and the impact on value-for-money of using different discount rates was evaluated. Public sector comparators have attracted considerable attention in the literature as they retain a pivotal role in the policy decision to use—or not use—private finance. However the fact that their detail is usually kept confidential by public sector procuring agencies—because of commercial sensitivities—has restricted informed discussion and open debate. Now the architecture of these comparators is laid bare for critical examination. It has generally been assumed that any reduction in the discount rate used in PSC calculations will favour conventional procurement over PFI-type contracting arrangements. The research reported in this paper demonstrates that the relationship between the discount rate and the attractiveness of using private finance is not as simple as has been assumed, and the outcome in terms of value-for-money is not as predictable as has previously been reported.     

Two-MPA Model for Siting a Marine Protected Area: Bahamian Case

This article recommends the parallel but separate modeling of nature-based and people-based marine protected areas (MPA) before the design and siting stages of establishing an MPA. Separate but simultaneous modeling of ideal nature and people MPAs permits each to be maximized for its own variables and subsequently compared to identify conflicts and agreements. The case that supports this recommendation is in the Commonwealth of the Bahamas, where the study conducted 572 interviews with people from six traditional settlements in the central Exumas Islands and Cays. The research is focused on why members of these settlements differentially responded to three nearby national MPA proposals.     

Agricultural vehicles and sustainable safe road traffic: solving conflicts on arterial highways

Addressing the issues of traffic safety in rural areas presents a constant challenge. The mix of light and heavy vehicles and the considerable differences in speed among these traffic participants result in high risks and delays for the faster vehicles. Agricultural vehicles (AVs) in particular have such an impact on traffic, especially when using arterial highways. This paper reviews the problems of safety and delays that AVs cause on arterial highways, and the appropriate mitigation. The concept of 'sustainable safety' in The Netherlands focuses on these problems, because of the proposed construction of parallel roads alongside all arterial highways. However, Dutch accident statistics cannot justify the high costs for the construction of parallel roads alongside 7000 km of arterial highways. Delays experienced by fast traffic are another reason for separating AVs from other road users with parallel roads. Alternative measures alongside the arterial highway, such as passing bays, restricting AVs to travelling at off-peak only and improving the conspicuity of the AVs, may be more cost-effective ways of reducing delays and/or improving traffic safety on arterial highways. Another solution may be to eliminate the need for AVs to use the arterial highway by altering their routes. For this purpose, land reallocation projects (as practised in Holland) can provide a useful tool.     

Gain-scheduled EGR control algorithm for light-duty diesel engines with static-gain parameter modeling

This paper presents a model-based gain scheduling algorithm of a PI-based EGR controller for light-duty diesel engines. In order to capture nonlinear characteristic of the EGR system, we have proposed a new scheduling variable to illustrate the static-gain of the plant model as a linear function. The proposed scheduling variable is composed of the air-tofuel ratio of the exhaust gas and the pressure ratio between the exhaust and intake manifolds. Using the scheduling variable, a static-gain model achieved 0.94 of the R-squared value with 810 of steady-state measurements which include key engine operating conditions. Based on the model of the static-gain parameter, the gains of the PI controller are decided by Skogestad internal model control (SIMC) tuning rule in real-time. Through various scenarios of engine experiments, the proposed gain scheduling algorithm represented that the PI gains were successfully adapted according to the changes of the engine operating conditions.     

Port performance in Asia: Does production efficiency imply environmental efficiency?

Atmospheric and water pollution are two main sources of negative environmental externalities generated by shipping. This study recognizes the negative externalities in the production of port services in East Asia by explicitly incorporating environmental impacts of shipping. Programming techniques are used to analyze 156 Origin–Destination pairs between 13 major East Asian ports, to derive the externality-augmented measures of port productivity and efficiency at the waterside. The results suggest that the inclusion of externality mitigation strategies can exert a considerable influence on efficiency performance.     

Property protection,financial constraints and economic growth

The relationship between financial system, law framework or economic growth has attracted considerable attention for years. However, there are some questions still remaining unanswered: between tangible assets protection and intellectual property protection, which is more important? Between external financing and property rights protection, which does play a greater role for the economic development? According to the dynamic stochastic general equilibrium(DSGE) model with non-free market factors, we study the effectiveness of property protection and external financing, and try to answer these questions. The model fits the data well, and we find:(1) protection of intellectual property plays a more important role than that of tangible asset, in the promotion of economy;(2) relaxation of financial constraints on corporate is more effective in the short run, while the protection of intellectual property is more effectual in the long term.