Comparison study on characteristics of nano-sized particle number distribution by using condensation particle counter calibrated with spray and soot type particle generation methods

In the year 2011, the Particle Measurement Program (PMP) in Europe started the regulation of the diesel vehicle’s nano-sized particle number density (PN) due to its high degree of harm to the human body. Concretely, the standard level of PN emission was introduced in the Euro 5+ and 6 emissions regulation with a limit (<6.0 × 10¹¹#/km) for diesel light-duty vehicle. Therefore, the determination of suitable and sophisticated instruments for reliable particle sampling and analysis was essential in taking exact experimental data. Now, among the PN emission measuring devices suggested by the PMP, condensation particle counter (CPC) is a key equipment for measuring the particle number density in real time and it has been used extensively. However, CPC can cause different results depending on operating conditions of the saturator and condensation that induce different rates of particle growth. This study was conducted to analyze the effect of CPC calibrated by a two-particle generator with spray and soot type methods applied on the nano-sized particle distribution’s parameters such as number concentration and linearity. Also, in order to ensure the reliability for particle sensor system named as PPS, which had emerged as a useful diagnostic to making spatially and temporally resolved quantitative measurements of diesel PN concentration, it was compared with calibrated CPC system. As a result, nano-sized particle measuring system with CPC calibrated by spray type particle generator had a much higher counting efficiency, indicating a larger nano size available than soot type particle generator. And, comparative experimental results on the correlation between the particle number of CPC to a reflectance PPS system showed that above 5,000 #/cm ³ in number concentrations measured by CPC as well as PPS were found to be similar with good linear relationship.     

Durability prediction for automobile aluminum front subframe using nonlinear models in virtual test simulations

This research work presents fatigue life evaluation techniques for an automotive vehicle aluminum front subframe using virtual test simulation technology with nonlinear suspension components model. The technology was used for improving the accuracy of the polynomial model used in conventional analysis. The proposed nonlinear suspension components models were developed using direct approach. The effects of the nonlinear elements on the prediction of the fatigue life were also analyzed. Actual aluminum front subframe was tested using half-car road test simulator to verify the accuracy of the models. It was found that the proposed nonlinear models yield more accurate results than conventional polynomial models. The proposed virtual test simulation technology with nonlinear suspension components model can be used to predict fatigue life for vehicle chassis structures more accurately.     

热带海洋大气中的3004铝和∝铜的原电池反应(英文)

The galvanic corrosion behaviour of aluminium 3004-∝brass with different area ratios was studied in the tropical marine atmosphere at Tuticorin harbour over a period of 426 days. The area ratios, viz. A Aluminium:A∝ brass, studied were 0.125, 0.25, 0.5, 1, 2, 4 and 8. The galvanic corrosion behaviour of the metals was studied in terms of the relative increase in the corrosion rate of aluminium due to galvanic coupling with ∝ brass, the relative decrease in the corrosion rate of ∝ brass due to galvanic coupling with aluminium, and the susceptibility of aluminium to pitting owing to galvanic coupling with ∝ brass. The galvanic potential and galvanic current of the system were monitored. Pits of different dimensions ranging from mild etchings to perforations were experienced on the borders and the surfaces of the interface of aluminium in contact with ∝ brass. The corrosion products resulting from galvanic corrosion were analysed using XRD and the pitting on aluminium as a result of galvanic corrosion was highlighted in terms of pit depth, size and density of pit, using a high resolution microscope. The most favourable area ratio of aluminium-∝ brass in marine atmosphere in terms of gravimetric corrosion rate is 8:1 and the most unfavourable area ratio of aluminium-∝ brass is 1:4.     

The influence of personality on acceptability of sustainable transport policies

Previous research has shown that fairness, infringement on freedom, and perceived effectiveness are determinants of transport pricing acceptability. In the present study we investigate determinants of acceptability of environmental (carbon) taxation for which trust in government and environmental concern are additional determinants. Carbon taxation is an extension of fuel taxes and may thus be viewed as transport pricing. Our main focus is on the role played by personality traits. Structural equation modeling reveals that acceptability is related to the personality traits extraversion, agreeableness, and conscientiousness. Extraverted individuals have higher levels of trust in government which leads to higher acceptability. Also correlations between agreeableness and conscientiousness as well as environmental problem awareness and personal norm are observed. We discuss strategies for effective marketing of transportation policies considering how acceptability is related to personality traits.     

Model-based control system design in a urea-SCR aftertreatment system based on NH3 sensor feedback

This paper presents preliminary control system simulation results in a urea-selective catalytic reduction (SCR) aftertreatment system based on NH₃ sensor feedback. A four-state control-oriented lumped parameter model is used to analyze the controllability and observability properties of the urea-SCR plant. A model-based estimator is designed via simulation and a control system is developed with design based on a sliding mode control framework. The control system based on NH₃ sensor feedback is analyzed via simulation by comparing it to a control system developed based on NO_x sensor feedback. Simulation results show that the NH₃ sensor-based strategy performs very similarly in comparison to a NO_x sensor-based strategy. The control system performance metrics for NO_x index, urea index, urea usage, and NH₃ slip suggest that the NO_x sensor can be a potential alternative to a NO_x sensor for urea-SCR control applications.     

ZS6900EV纯电动城市公交客车

文章主要介绍了ZS6900EV纯电动城市公交客车的结构参数、动力性能及其基本工作原理、主要部件和测试结果.     

Numerical Simulation of Vehicle Behavior during Straight Line Keeping on Undulating Road Surfaces

Numerical design of vehicles having optimal straight line stability on undulating road surfaces requires an accurate vehicle model based on knowledge of the relevant phenomena. Therefore, vehicle behavior on undulating straight roads has been analyzed and modeled. Measurements on a flat road surface have shown that the dedicated vehicle model yields accurate simulation results of the steering response to medium steering wheel angle inputs. In addition, the model has been validated by measuring two vehicle responses during normal driving on an undulating straight road: viz. the responses to the small steering wheel angle input and to the input by the global inclination of the road surface.     

Union rivalry and crew reform in shipping: A United States—Australia comparison

The national-flag fleets of most of the traditional martitime nations have, in virtually every case, been in decline in the 1980s and 1990s, despite the continued growth of ocean shipping. They have declined in terms of numbers of vessels and numbers of sea-going jobs, although not necessarily in terms of cargo carried. However, a number of those nations have responded to the changed technological and competitive conditions with some success by attempting to adjust crewing and work practices on vessels at sea. Neither the USA nor Australia has been in the forefront of such change. However, considerably more progress has been made in modernizing crewing practices and work rules in the Australian-flag fleet than in the US-flag fleet. There are a variety of reasons for this, inluding government policy. However, it is our argument that one of the principal reasons the US fleet lags behind the Australian fleet in the adoption of modern crewing practices and work rules is the much greater degree of union rivalry in the US shipping industry. In fact, while the degree of fragmentation and rivalry among unions in the Australian flag fleet has declined dramatically since 1980, their US cousins have continued, and in some ways expanded, their pattern of fratricidal behavior. First we shall discuss some of the technological and competitive imperatives that are driving human resource management practices in shipping and the crewing and industrial relations adjustments that are being made around the world to adjust to them. Then we shall indicate how the Australian and US fleets have responded to these challenges. This will be followed by a discussion of unionism in the Australian and US maritime industrics as it has devloped in the last two decades of the twentieth century. Finally, we shall draw conclusions about the impact of different patterns of unionization.     

The effects of chord length and boundary conditions on the static strength of a tubular T-joint under brace compression loading

Non-linear finite element analysis is used to assess the static collapse strength of a sample tubular T-joint configuration subjected to compressive brace loading. Two series of models are used to assess the effects of varying the chord length L, one series having simply supported chord ends and the other having fixed chord ends. It is shown that chord length and boundary conditions can have a significant influence on static collapse loads. The results are discussed in the light of current design procedures.     

北京市铁路噪声特性实例分析研究

通过实际测量及数据分析，认为测量现场昼夜等效声级达到 ７７７ ｄ Ｂ（ Ａ），超过了国家标准；快速列车噪声频谱分布复杂，难以治理；列车鸣笛对铁路噪声超标贡献最大，验证了铁路噪声与列车车速的关系，最后提出控制铁路噪声的建议。