Experiments on the survival of six brackish macro-invertebrates from the Baltic Sea after dredged spoil coverage and its implications for the field

Physical disturbance by disposal of dredged materials in estuarine and coastal waters may result in burial of benthic fauna. Survival rates depend on a variety of factors including the type and amount of disposed materials and the lifestyle of the organisms. Laboratory burial experiments using six common macrobenthic invertebrates from a brackish habitat of the western Baltic Sea were performed to test the organisms' escape reaction to dredged material disposal. Experimental lab-results were then extrapolated to a field situation with corresponding bottom topography and covering layer thicknesses at experimental field disposal study sites. Resulted survival rates were then verified by comparison with results of an earlier field study at the same disposal sites.Our experimental design in the lab included the disposal of two types of dredged material (i.e. ‘till’ and ‘sand/till mixture’) and two covering layer depths (i.e. 10–20 cm and 14–40 cm). All three bivalves Arctica islandica (Linnaeus), Macoma balthica (Linnaeus), Mya arenaria (Linnaeus) and the polychaete Nephtys hombergii (Savigny) successfully burrowed to the surface of a 32–41 cm deposited sediment layer of till or sand/till mixture and restored contact with the overlying water. These high escape potentials could partly be explained by the heterogeneous texture of the till and sand/till mixture with ‘voids’. The polychaete Bylgides (Harmothoe) sarsi (Malmgren) successfully burrowed through a 16 cm covering layer whereas the polychaete Lagis koreni (Malmgren) showed almost no escaping reaction. No general differences in escape behaviour after burial were detected between our test species from the brackish habitat and those reported in the literature for the same species in marine environments. However, a size-dependence in mobility of motile polychaetes and M. arenaria was apparent within our study. In comparison to a thick coverage, thin covering layers (i.e. 15–16 cm and 20 cm) increased the chance of the organisms (N. hombergii and M. arenaria) to reach the sediment surface after burial. This was not observed for the other test species. While crawling upward to the new sediment surfaces burrowing velocities of up to 8 cm d^− 1 were observed for the bivalves and up to 20 cm d^− 1 for N. hombergii. Between 17 and 79% of the test organisms showed burrowing activity after experimental burial. The survival rate (defined as the ability to regained contact with the sediment surface) ranged from 0 to 33%, depending on species and on burial depth. The organisms reached the sediment surface by burrowing (polychaetes and bivalves) and/or by extending their siphons to the new sediment surface (bivalves). The extrapolation of laboratory survival rates to the two disposal sites was obtained based on the in situ thicknesses of the dredged spoil layers measured by multi-beam echo sounder. This resulted in total average survival rate estimates for the test species of 45 and 43% for the two disposal sites. The results obtained during the laboratory tests and the following extrapolation to the field were verified by the range of results from a previous field study, using grab sampling shortly before and after a disposal event in June 2001. The effect of dredged material disposal on the tested Baltic Sea benthic macrofauna was assessed by extrapolating the verified laboratory results to the field.     

Probabilistic modelling of the ultimate strength of ship plates with non-uniform corrosion

This paper presents the results of a parametric study of probabilistic modelling of the ultimate strength of ship plates with non-uniform corrosion represented by random fields. The load-shortening behaviour of the plates with non-uniform reduction of thickness due to corrosion under longitudinal compression is obtained using a general-purpose nonlinear finite element analysis program. A nonlinear time-dependent corrosion model is used to define the probabilistic characteristics of the random fields based on corrosion data measured in plate elements at different locations of bulk carriers. Based on the probabilistic models derived by Monte Carlo simulation, equations to predict the mean and the 5 % characteristic value of the ultimate strength of plates with non-uniform corrosion are developed. Finally a regression equation is proposed to take into account the effect of non-uniform corrosion patterns in the predictions of the ultimate strength of plates with uniform corrosion.     

Fault diagnosis of steam power system based on convolutional neural network北大核心CSCD

[Objectives]In order to improve the fault diagnosis level of marine power systems, this paper studies the real-time fault diagnosis of a marine supercharged boiler based on a convolutional neural network (CNN).[Methods]First, the simulation program of the marine supercharged boiler is developed based on the GSE platform, and the simulation fault data is obtained. The fault diagnosis model of the boiler is then established using the CNN method. Next, through the change trends of temperature, flow and other parameters, combined with a priori knowledge and the machine learning method, fault identification is carried out. Lastly, the performance of the method is evaluated against criteria such as confusion matrix and accuracy. [Results]According to the comparison results between the feature extracted dataset and the original dataset, the stability of the model output results and the generalization ability of the model are optimized and improved, with an overall fault classification accuracy reaching 99.53%.[Conclusion]The results of this study can provide valuable references for the intelligent monitoring of marine power systems. © 2022 Chinese Medical Journals Publishing House Co.Ltd. All rights reserved.     

Pollution history of a tropical estuary revealed by combined hydrodynamic modelling and sediment geochemistry

Hydrodynamic modelling of water movement in Hunts Bay, a protected part of Kingston Harbour, Jamaica, shows that depth averaged tidal flows are very low. In the northeast corner of Hunts Bay, water is essentially stagnant. Even under high flow conditions, much of the Bay bottom water is ‘bypassed' by buoyant, lower salinity surface flows. The muddy sediments of Hunts Bay reflect these sluggish to stagnant conditions; sediment cores from the northeast corner of the Bay contain progressively higher amounts of organic matter in their upper parts (last 15–20 years sedimentation). Combined C/N ratios and stable carbon isotope compositions of this organic matter imply a sewage origin. Both lead and chromium metal concentrations and enrichment factors relative to average crustal shales show geographically related patterns that reflect hydrodynamic circulation predicted by modelling. In particular, metal concentrations and enrichment factors are highest at the northern end of the bay, especially in the northeast corner. Modelling confirms that stagnant conditions would occur in the northeast part of the bay even without the presence of a major causeway. The causeway may contribute to low flow conditions, but is not the principal cause of organic contamination, which is simply an excessive input of sewage.     

Residual circulation in the Ría de Muros (NW Spain): A 3D numerical model study

The residual circulation of the Ría de Muros, a large coastal embayment in NW Spain, are studied using a three-dimensional baroclinic finite-difference model. The driving forces considered by the model include the tide, winds, river inflows and density forcing at the open boundary. In situ data of current velocity and direction, water level, wind velocity and direction, river discharge, and temperature and salinity are used for model validation. Simulated and observed time series of water level and current velocity are in good agreement. Once validated, the model is applied to compute the residual circulation induced by the relevant agents of the ría hydrodynamics—the tide, an upwelling-favourable wind characteristic of spring and summer, a downwelling-favourable wind typical of winter, and freshwater inflows associated with high river runoff. The resulting residual circulation differ notably. The tide does not generate significant residual flows except in the inner ría. By contrast, winds and river discharges induce important residual flows throughout; in the middle and outer ría they generate a 3D residual circulation pattern which renders the conventional two-layer scheme of estuarine circulation too simplistic in this case. Thus, this first application of a 3D numerical model to the Ría de Muros sheds new light on its fundamental hydrodynamics.     

Estimation of air–sea CO2 fluxes in the Bay of Biscay based on empirical relationships and remotely sensed observations

An empirical algorithm has been developed to compute the sea surface CO₂ fugacity (fCO₂^sw) in the Bay of Biscay from remotely sensed sea surface temperature (SST_RS) and chlorophyll a (chl a_RS) retrieved from AVHRR and SeaWiFS sensors, respectively. Underway fCO₂^sw measurements recorded during 2003 were correlated with SST_RS and chl a_RS data yielding a regression error of 0.1 ± 7.5 µatm (mean ± standard deviation). The spatial and temporal variability of air–sea fCO₂ gradient (ΔfCO₂) and air–sea CO₂ flux (FCO₂) was analyzed using remotely sensed images from September 1997 to December 2004. An average FCO₂ of ? 1.9 ± 0.1 mol m^? 2 yr^? 1 characterized the Bay of Biscay as a CO₂ sink that is suffering a significant long-term decrease of 0.08 ± 0.05 mol m^? 2 yr^? 2 in its capacity to store atmospheric CO₂. The main parameter controlling the long-term variability of the CO₂ uptake from the atmosphere was the air–sea CO₂ transfer velocity (57%), followed by the SST_RS (10%) and the chl a_RS (2%).     

Open-type ferry safety system design for using LNG fuel

In this feasibility study, we investigate the viability of using Liquefied Natural Gas (LNG) fuel in an open type Ro-Ro passenger ferry and the associated potential challenges with regard to the vessel safety systems. We recommend an appropriate methodology for converting existing ships to run on LNG fuel, discuss all the necessary modifications to the ship’s safety systems, and also evaluate the relevant ship evacuation procedures. We outline the basic requirements with which the ship already complies for each safety system and analyze the additional restrictions that must be taken into consideration for the use of LNG fuel. Appropriate actions are recommended. Furthermore, we carry out a hazard identification study. Overall, we clearly demonstrate the technical feasibility of the investigated scenario. Minimal modifications to the ship’s safety systems are required to comply with existing safety rules for this specific type of ship.     

A Mean Dynamic Topography of the Mediterranean Sea computed from altimetric data, in-situ measurements and a general circulation model

In the Mediterranean Sea, where the mean circulation is largely unknown and characterized by smaller scales and less intensity than in the open ocean, the interpretation of altimetric Sea Level Anomalies (SLA) is rather difficult. In the context of operational systems such as MFS (Mediterranean Forecasting System) or MERCATOR, that assimilate the altimetric information, the estimation of a realistic Mean Dynamic Topography (MDT) consistent with altimetric SLA to be used to reconstruct absolute sea level is a crucial issue. A method is developed here to estimate the required MDT combining oceanic observations as altimetric and in-situ measurements and outputs from an ocean general circulation model (OGCM).In a first step, the average over the 1993–1999 period of dynamic topography outputs from MFS OGCM provides a first guess for the computation of the MDT. Then, in a second step, drifting buoy velocities and altimetric data are combined using a synthetic method to obtain local estimates of the mean geostrophic circulation which are then used to improve the first guess through an inverse technique and map the MDT field (hereafter the Synthetic Mean Dynamic Topography or SMDT) on a 1/8° resolution grid.Many interesting current patterns and cyclonic/anticyclonic structures are visible on the SMDT obtained. The main Mediterranean coastal currents are well marked (as the Algerian Current or the Liguro–Provenço–Catalan Current). East of the Sicily channel, the Atlantic Ionian Stream divides into several main branches crossing the Ionian Sea at various latitudes before joining at 19°E into a unique Mid-Mediterranean Jet. Also, strong signatures of the main Mediterranean eddies are obtained (as for instance the Alboran gyre, the Pelops, Ierapetra, Mersa-Matruh or Shikmona anticyclones and the Cretan, Rhodes or West Cyprius cyclones). Independent in-situ measurements from Sea Campaigns NORBAL in the North Balearic Sea and the North Tyrrhenian Sea and SYMPLEX in the Sicily channel are used to validate locally the SMDT: deduced absolute altimetric dynamic topography compares well with in-situ observations. Finally, the SMDT is used to compute absolute altimetric maps in the Alboran Sea and the Algerian Current. The use of absolute altimetric signal allows to accurately follow the formation and propagation of cyclonic and anticyclonic eddies in both areas.     

Analysis of naval warship blast and shock resistance technology system北大核心CSCD

舰船抗爆和抗冲击技术概念宏观,内涵广泛,对其认识理解、设计研究都需要技术体系的顶层划分和牵引。首先,基于武器攻击对舰船的爆炸毁伤类型,对舰船抗爆与抗冲击这两个概念进行划分;然后,基于舰船总体抗爆抗冲击设计技术需求,区分不同的研究对象及技术的基础理论,提出包含6大类型的舰船抗爆抗冲击技术体系的划分方案,即水上/水下防护结构设计、新型抗爆结构与毁伤分析、设备系统及人员抗冲击、舰船抗爆抗冲击试验验证及技术标准规范;最后,分别对舰船抗爆和抗冲击技术内涵进行详细阐述。所做研究可为我国舰船抗爆抗冲击技术体系的形成提供一个初步构想,供从事舰船抗爆抗冲击设计、研究及管理人员参考。