Diesel-engined vehicle nitric oxide and soot emissions during the European light-duty driving cycle using a transient mapping approach

An engine mapping-based methodology is developed to gain a first approximation of a vehicle’s performance and emissions during a light-duty cycle. The procedure is based on a steady-state experimental investigation of the engine with an appropriate vehicle drivetrain model applied so that the cycle vehicle speed data can be transformed into engine speed and torque. Correction analysis is then applied based on transient experimentation to account for the transient discrepancies during real driving. The developed algorithm is applied for the case of a diesel-engined vehicle running on the European light-duty cycle. A comparative analysis is performed for each section of the cycle revealing its individual transient characteristics.     

Derivation of delays based on improved macroscopic traffic models

Recent improved and rigorous mathematical models describing the formation and dissipation of queues at signalized intersections are employed for deriving delay and effective queue size. Analytical and numerical solutions are presented that are applicable for both isolated and coordinated intersections. Comparisons against results obtained from conventional models reveals significant differences. Further, it is demonstrated that the current practice of calculating delays from input-output analysis results in substantial overestimation of delays. Numerical examples supporting this finding are presented.     

The most likely trip matrix estimated from traffic counts

For a large number of applications conventional methods for estimating an origin destination matrix become too expensive to use. Two models, based on information minimisation and entropy maximisation principles, have been developed by the authors to estimate an O-D matrix from traffic counts. The models assume knowledge of the paths followed by the vehicles over the network. The models then use the traffic counts to estimate the most likely O-D matrix consistent with the link volumes available and any prior information about the trip matrix. Both models can be used to update and improve a previous O-D matrix. An algorithm to find a solution to the model is then described. The models have been tested with artificial data and performed reasonably well. Further research is being carried out to validate the models with real data.     

Physical processes in wheel–rail contact and its implications on vehicle–track interaction

Friction within the wheel–rail contact highly influences all aspects of vehicle–track interaction. Models describing this frictional behaviour are of high relevance, for example, for reliable predictions on drive train dynamics. It has been shown by experiments, that the friction at a certain position on rail is not describable by only one number for the coefficient of friction. Beside the contact conditions (existence of liquids, solid third bodies, etc.) the vehicle speed, normal loading and contact geometry are further influencing factors. State-of-the-art models are not able to account for this sufficiently. Thus, an Extended-Creep-Force-Model was developed taking into account effects from third body layers. This model is able to describe all considered effects. In this way, a significant improvement of the prediction quality with respect to all aspects of vehicle–track interaction is expected.     

Application study on a control strategy for a hybrid electric public bus

This paper first describes the control strategy used in a hybrid electric public bus and then proposes a torque-balancing control strategy. Simulations were performed using the designed control strategies, and the results were analyzed under different conditions. The torque-balancing control strategy was improved on the basis of the efficiency-first ideas of the hybrid system. Finally, experiments were performed to verify that the efficiency-first and torque-balancing control strategy (EFCS) is both feasible and reliable. The simulation results showed that, compared with a conventional public bus, the hybrid electric bus could save approximately 27.3 percent on fuel consumption using the EFCS control strategy in a public bus in China, while under the Wuhan urban driving cycle.     

Entre marche et métro, les mouvements intra-urbains des touristes sous le prisme de l’? adhérence ? à Paris et en ?le-de-France

The urban movement of tourists remains largely unknown, but the mobility of tourists contributes to the metropolitan process. Around the notion of ??adherence??, this article demonstrates how, in the Paris metropole, tourists rely mainly on walking and the use of the tube to travel within the city. The structurally different characteristics of walking and the use of the tube represent a theoretical opposition between the two types of movements that are differently ??adherent?? to the city. However, these mobilities complement each other. Indeed, the partial disconnection of the tube is addressed by the direct connection and proximity to the city allowed by the pedestrian means.     

Constructal design of tree-shaped microchannel disc heat sink with wavy walls北大核心CSCD

［Objective］To meet the efficient thermal management needs of electronic devices such as ships and underwater vehicles, this study focuses on the constructal design of a tree-shaped microchannel disc heat sink with wavy walls. ［Method］A design prototype of the heat sink with wavy walls is first proposed. Based on constructal theory, the amplitude and wavelength of the wavy walls are designed under the constraints of fixed heat sink volume and fixed microchannel volume by maximizing the comprehensive performance evaluation criteria (PEC) while considering both heat transfer and flow pressure drop. ［Results］The results show that the wavy walls increase the heat transfer surface areas and generate vortices in their cavities, effectively reducing the maximum temperature. When the inlet Reynolds number is fixed at 700, 900 or 1100 respectively, the maximum temperature is reduced by 13.5 K by increasing the amplitude of the wavy walls, while the pressure drop increases significantly; and the maximum temperature is reduced by 4.7 K by reducing the wavelength of the wavy walls, while the pressure drop increases slightly. There are optimal amplitudes that raise the comprehensive performance evaluation criteria to extreme values for given larger wavelengths, while the comprehensive performance evaluation criteria increase monotonously as the amplitude increases for given smaller wavelengths. ［Conclusion］Wavy walls can significantly improve the thermal performance of tree-shaped microchannel disc heat sinks, and the use of constructal design can realize optimal geometric constructs with optimal comprehensive performance evaluation criteria. © 2023 Authors. All rights reserved.     

Improved hot-stamping analysis of tubular boron steel with direct measurement of heat convection coefficient

There are two types of hot-stamping processes, direct and indirect, depending on the sequence of the heating, forming, and quenching steps and the method used for each step. In this study, an indirect hot-stamping process consisting of forming at room temperature, heating, and water quenching was applied to develop a coupled torsion beam axle. The analysis results indicated that the application of the heat convection coefficient is critical in the simulations and must take into account the temperature and specific location in the model to ensure the accuracy of the heating and quenching analysis. The heat convection coefficients used in the analysis were directly measured at various positions of the tube (e.g., outside, inside, and bending region) using thermocouples, and the final values were determined through correlation between the actual tests and numerical analysis. The experimental and simulated final deformed shape and temperature distribution were in good agreement.     

Modelling and validation of coupled high-speed maglev train-and-viaduct systems considering support flexibility

This study presents a more realistic modelling of the maglev-based high-speed railway line in Shanghai, China. Focus is placed on an accurate simulation of the two subsystems: the train subsystem including the magnets and the viaduct subsystem including the modular function units of the rails. The electromagnet force–air gap model with a proportional-derivative (PD) controller is adopted to simulate the interaction between the maglev train via its electromagnets and the viaduct via its modular function units. The flexibilities of the rails, girders, piers and associated elastic bearings are all considered in the modelling of the viaduct subsystem to investigate their effects on an interaction between the two subsystems. By applying the proposed model to the Shanghai maglev line, the essential characteristics of the coupled system can be duly captured. The accuracy and effectiveness of the proposed approach are then validated by comparing the computed dynamic responses and frequencies with the measurement results. It is confirmed that the proposed modelling with a detailed simulation of the magnets and modular function units can duly account for the dynamic interaction between the train and viaduct systems. Moreover, the effects of the inclusion of the flexibilities of the rails, girders and elastic supports to the response of the coupled system are respectively investigated, the results of which prove that their involvements are essential to the accurate prediction of the response of the coupled maglev train–viaduct system.