Prediction procedure for wear distribution of transient rolling tire

As a research method, finite element analysis (FEA) with ABAQUS can help researchers to study throughout the whole process of abnormal tire wear. For precise tread wear simulation, this paper introduces a tire finite element model building method. Then, the model is verified by comparing its simulation results with experiment data. Based on the verified model, tire high-speed rolling procedure is presented by combining steady-state transport analysis and dynamic analysis. To predict the wear distribution, micro tread wear calculation method is described. Finally, the wear prediction procedure of tread mesh evolving is introduced and tire polygonal wear pattern is simulated by this procedure.     

Discerning the operational state of a vehicle’s distributed electronic systems from vehicle network traffic for use as a fault detection and diagnosis tool

This paper suggests a novel approach to finding faults in a vehicle’s electronic systems by monitoring the network traffic directly and generating statistical traits. The nature of the data in a CAN network is considered, and a case for the use of statistical analysis presented. Statistical traits extracted from the temporal behavior of network messages are investigated as a metric for fault detection. It is shown how this trait information can be extracted from network data, and how this information could be used for fault detection of an unknown fault on a CAN network. It is then demonstrated that combining multiple types of trait data can be used to correctly identify a fault once detected.     

Optimization of drying performance considering driving conditions

Compressed air can be used as an energy source for brake systems in medium-heavy and heavy-duty commercial vehicles. The moisture in compressed air, which is due to high temperature and humidity, can be eliminated by using an air dryer. In this paper, drying performance data for a cartridge were obtained and used to develop a drying performance program, to predict the moisture and relative humidity in the air tanks of vehicles. The on-load time, off-load time, air flow, duty cycle, humidity and dew point temperature were calculated according to air consumption. The validity of the program was verified, and it was shown to be able to predict humidity changes in the air tank. The air tank capacity was increased from 100 to 130 to reduce the duty cycle. Therefore, the regeneration rate decreased from 18% to 15%, but the dew point depression temperature (ΔT) remained above 30°C. The duty cycle decreased from 50% to 43%, and the total operation time and power consumption of the air compressor were reduced. In conclusion, fuel savings were obtained by changing the parameters to optimize the system.     

Torque ripple minimization control of permanent magnet synchronous motors for EPS applications

This paper identifies a control method used to reduce torque ripple of a permanent magnet synchronous motor (PMSM) for an electric power steering (EPS) system. NVH (Noise Vibration Harshness) is important for safe and convenient driving. Vibration caused by motor torque is a problem in column type EPS systems. Maintaining a very low torque ripple is one solution that allows for smoother steering. Theoretically, it is possible to design and drive the motor without torque ripple. However, in reality, a PMSM system torque ripple is caused by the motor itself (saturation in the iron core and EMF distortion) and the imperfect driver. This paper analyzes torque ripple of a PMSM system, and an advanced PMSM control method for the column typed EPS system is presented. Results of the analysis indicate that the compensation current is needed in order to minimize torque ripple when a PMSM is driven.     

Comparative analysis on dynamic behavior of two HMA railway substructures

A numerical analysis using a finite element program was performed on three structures:hot mix asphalt(HMA) reinforced trackbed(RACS-1),HMA directly supported trackbed(RACS-2),and traditional Portland Cement Concrete(PCC) slab track(SlabTrack).Although the comprehensive dynamic responses of RACS-1 were similar with SlabTrack,HMA layer can positively affect the stress distributions.In particular,the horizontal stresses indicate that the resilience of RACS-1 was improved relative to SlabTrack.In addition,HMA r...     

Assessment of IACS-CSR implicit safety levels for buckling strength of stiffened panels for double hull tankers

The present study aims at applying structural reliability methods to assess the implicit safety levels of the buckling strength requirements for longitudinal stiffened panels implemented in the IACS Common Structural Rules (CSR) for double hull oil tankers. The buckling strength requirements considered are used in the initial stage of the hull girder scantlings’ design to control the buckling capacity of longitudinal stiffened panels subjected to the compressive loads induced by the hull girder vertical bending. The following buckling collapse failure modes are explicitly considered in the design formulation: uniaxial buckling of the plating between stiffeners, column buckling of stiffeners with attached plating and lateral-torsional buckling or tripping of stiffeners.The paper presents the procedure used to assess the implicit safety levels of the strength requirements for the three buckling collapse failure modes above mentioned, which includes the optimization of the scantlings of the plate panels and longitudinal stiffeners in order to reflect the minimum strength required by the formulation. A first order reliability formulation is adopted, and stochastic models proposed in the literature are used to quantify the uncertainty in the relevant design variables. A sample of five oil tankers representative of the range of application of the IACS-CSR design rules is considered. The effect of corrosion in the implicit safety levels is quantified based on the three corrosion levels of the Net Thickness Approach (NTA) adopted in the design rules. Sensitivity analyses are also performed to quantify the relative contribution or importance of each design random variable to the implicit safety levels.     

A time-use investigation of shopping participation in three Canadian cities: is there evidence of social exclusion?

Increasing awareness and concern about the status of mobility-disadvantaged groups in society has given rise to a wide body of research that focuses on the social exclusion dimension of transportation. To date, much of the empirical work on this topic is mainly spatial in nature despite recent developments that call for the inclusion of time use analyses in social exclusion research. In this paper we attempt to fill this gap by estimating activity and trip durations to determine whether poverty, old age, or being a single parent results in time use patterns indicative of exclusion. Given the importance of shopping and using services for social inclusion objectives, these activities are the focus of this investigation. In terms of methods, use of a multiple equation approach allows for the estimation of the daily duration of shopping activities and trips while simultaneously controlling for daily durations of four broad categories of activities as well as their associated travel times. The results indicate: that being a senior citizen increases travel durations while decreasing shopping activity durations; that coming from a low income household decreases shopping activity durations; and single-parent status does not impact shopping activity durations when holding income and other activity durations constant. These results highlight the feasibility and challenges of time-use and activity analysis in social exclusion research.     

Optimal allocation of turns to lanes at an isolated signal-controlled junction

Conventional design methods require the lane marking patterns, which are painted on ground showing road users the permissible turning directions on different approach lanes, as exogenous inputs to define the traffic stream grouping for analysis. This predefined grouping of traffic movements may restrict the design of signal timings in the optimisation procedures. More recently, a lane-based design method has been developed to relax the lane markings as binary-type control variables in a mathematical programming approach. The lane marking patterns and the signal timings can then be optimised simultaneously in a unified framework. This paper presents an extension work to further relax the numbers of approach lane in traffic arms as new integer variables which can then be optimised to give optimal lane arrangement in various arms of a junction to manage the given traffic demands more efficiently. All well-defined signal timings variables in the phase-based approach as well as the lane marking and lane flow variables in the lane-based approach together with their governing constraints are all preserved in the new formulation for the reserve capacity optimisation of isolated signal-controlled junctions.     

Galvanic corrosion behaviour of aluminium 3004 and copper in tropical marine atmosphere

The galvanic corrosion behaviour of aluminium 3004 and copper with different area ratios were studied in the tropical marine atmosphere at Tuticorin harbour over a period of 426 days. The area ratios OfAAI： Acu, studied were l：l, 1：2, l：4, 1：8, 2：1, 4：1 ＆ 8：1. The galvanic corrosion behaviour of metals was studied in terms of relative increase in the corrosion rate of aluminium due to galvanic coupling with copper, relative decrease in the corrosion rate of copper due to galvanic coupling with aluminium, and the susceptibility of aluminium to pitting owing to galvanic coupling with copper, The galvanic potential and galvanic current of the system were monitored. Pits of different dimensions ranging from mild etchings to perforations were experienced on the borders and the surfaces of the interface of aluminium in contact with copper. The weathering parameters and the environmental pollutants which have a major role in influencing the galvanic corrosion of metals were also monitored. The corrosion products resulting from galvanic corrosion were analysed using XRD and the pitting on aluminium resulting from galvanic corrosion has been highlighted in terms of pit depth, size and density of pit, using a high resolution microscope.     

Analysis of impact damage characteristics of marine carbon fiber composite laminates embedded with PEI film北大核心CSCD

[目的]在传统船用碳纤维复合材料层合板层间添加热塑性相材料能有效提升船用复合材料的抗冲击性能,为探究其冲击损伤特性,开展实验研究。[方法]使用光学显微镜观察层合板的热塑性/热固性界面,分析两相材料的结合方式;对不同结构的复合材料层合板进行低、中、高3种不同能量的低速冲击;通过超声C扫描与电子显微镜,对各试件的损伤形貌进行观测,以研究各试件的冲击响应及损伤机理。[结果]结果显示,相较于碳纤维层合板,含热塑性相的船用复合材料层合板具有更好的损伤阻抗;内部嵌膜层合板试件在冲击能量为8和12 J的冲击下,内部分层损伤分别减少了19%和39%,且受到12 J冲击后,内部结构损伤较小,完整性较好。[结论]将PEI热塑性膜嵌于内部能提升层合板的韧性,显著减少内部分层损伤,明显提升内部嵌膜层合板的抗冲击性能。