Correlation between automotive CO, HC, NO, and PM emission factors from on-road remote sensing: implications for inspection and maintenance programs

Carbon monoxide (CO), hydrocarbon (HC), and nitrogen oxide (NO) emission factors (EFs) are measured with a commercial vehicle emissions remote sensing system (VERSS) during a large-scale vehicle exhaust emissions study in Las Vegas. Particulate matter (PM) EFs are simultaneously measured for individual vehicles with a newly developed PM-VERSS based on ultraviolet backscatter light detection and ranging (Lidar). The effectiveness of CO and HC EFs as proxy for NO and PM EFs for spark-ignition vehicles is evaluated. Poor correlations were found between EFs for pollutants on an individual vehicle basis indicating that high EFs for one or more pollutants cannot be used as a predictor of high EFs for other pollutants. Stronger functional relationships became evident after averaging the EF data in bins based on rank-order of a single pollutant EF. Low overlap between the highest 10% emitters for CO, HC, NO, and PM was found. These results imply that for an effective reduction of the four pollutants, inspection and maintenance (I/M) programs, including clean screening, should measure all four pollutants individually. Fleet average CO and HC concentrations determined by gaseous VERSS were compared with fleet average CO and HC concentrations measured at low-idle and at high-idle during local I/M tests for spark-ignition vehicles. The fleet average CO concentrations measured by I/M tests at either idle were about half of those measured by remote sensing. The fleet average high-idle HC concentration measured by I/M tests was about half of that measured by VERSS while low-idle I/M and VERSS HC average concentrations were in better agreement. For a typical vehicle trip, most of the fuel is burned during non-idle conditions. I/M measurements collected during idling conditions may not be a good indicator of a vehicle’s potential to be a high emitter. VERSS measurements, when the vehicle is under a load, should more effectively identify high emitting vehicles that have a large contribution to the mobile emissions inventory.     

我国汽车金融业的发展现状及趋势展望

首先分析了国内外汽车金融业的发展状况，并从当前我国汽车金融业存在的问题入手，着重从内部和外部环境2个方面进行了分析，从而有针对性地提出了我国汽车金融服务的改革思路和解决相关问题的政策建议，并对未来发展趋势作出理性预测和判断，制度设计上更趋于合理、完善；服务质量和水平逐步与国际接轨；竞争推动下的具有中国特色的金融创新渐趋活跃。在此基础上笔者设想了一种银行一体化的营销模式，权当为未来银行汽车金融业务的开展作一有益尝试。     

南宁市江南堤路园工程西园段填筑路堤后岸坡稳定性分析

通过广泛收集大量相关资料、水下测量、工程补勘及室内试验,结合岸坡稳定的各种工况,循序渐进地反复试算,综合评价南宁市堤路园工程西园段路堤加载对岸坡稳定性的影响.研究结果认为,本工程场地是稳定的;现有的钢筋砼堤也是稳定的;该段路堤加载对岸坡不产生新的稳定性问题.西园段堤路园中的道路采用填土方案是可行的.该研究为江南堤路园工程西园段的建设提供决策依据,并为设计提供技术支持.     

提速改线工程路基施工质量控制

介绍为达到铁路提速要求,改线工程和改善设备状态是关键。施工必须统一思想,明确目标,加强管理,严格标准,控制质量,特别对改移较大的曲线地段路基工程,采取多种措施、优质、出色地完成了施工任务。     

Exploring the impact of walk–bike infrastructure,safety perception,and built-environment on active transportation mode choice: a random parameter model using New York City commuter data

This study estimates a random parameter (mixed) logit model for active transportation (walk and bicycle) choices for work trips in the New York City (using 2010–2011 Regional Household Travel Survey Data). We explored the effects of traffic safety, walk–bike network facilities, and land use attributes on walk and bicycle mode choice decision in the New York City for home-to-work commute. Applying the flexible econometric structure of random parameter models, we capture the heterogeneity in the decision making process and simulate scenarios considering improvement in walk–bike infrastructure such as sidewalk width and length of bike lane. Our results indicate that increasing sidewalk width, total length of bike lane, and proportion of protected bike lane will increase the likelihood of more people taking active transportation mode This suggests that the local authorities and planning agencies to invest more on building and maintaining the infrastructure for pedestrians. Further, improvement in traffic safety by reducing traffic crashes involving pedestrians and bicyclists, will increase the likelihood of taking active transportation modes. Our results also show positive correlation between number of non-motorized trips by the other family members and the likelihood to choose active transportation mode. The model would be an essential tool to estimate the impact of improving traffic safety and walk–bike infrastructure which will assist in investment decision making.     

A Simplified Model for the Effect of Weld-Induced Residual Stresses on the Axial Ultimate Strength of Stiffened Plates

The present work investigates the compressive axial ultimate strength of fillet-welded steel-plated ship structures subjected to uniaxial compression, in which the residual stresses in the welded plates are calculated by a thermo-elasto-plastic finite element analysis that is used to fit an idealized model of residual stress distribution. The numerical results of ultimate strength based on the simplified model of residual stress show good agreement with those of various methods including the International Association of Classification Societies (IACS) Common Structural Rules (CSR), leading to the conclusion that the simplified model can be effectively used to represent the distribution of residual stresses in steel-plated structures in a wide range of engineering applications. It is concluded that the widths of the tension zones in the welded plates have a quasi-linear behavior with respect to the plate slenderness. The effect of residual stress on the axial strength of the stiffened plate is analyzed and discussed.     

Development and calibration of a long-distance passenger traffic assignment model

This paper studies the assignment of long-distance passenger traffic on a highway corridor network. First, we propose a traditional model for the long-distance traffic assignment considering interactions with local commuter traffic. It addresses the effect of local networks on highway corridors. An iterative algorithm is developed to solve for the exact solution. Then, to address the potential computational issues that arise therein, a decomposition method is proposed by introducing a new concept of corridor elasticity. An assignment procedure for long-distance passenger traffic is developed accordingly. Numerical tests show that the proposed decomposition method makes significant improvements in computational performance at a small loss of optimality. This decomposition method well approximates the exact assignment from the traditional formulation, especially when the highway corridors are near-saturation. The proposed decomposition method appears practical for application.     

Assessing the representativeness of a smartphone-based household travel survey in Dar es Salaam,Tanzania

The household travel survey (HTS) finds itself in the midst of rapid technological change. Traditional methods are increasingly being sidelined by digital devices and computational power—for tracking movements, automatically detecting modes and activities, facilitating data collection, etc.. Smartphones have recently emerged as the latest technological enhancement. FMS is a smartphone-based prompted-recall HTS platform, consisting of an app for sensor data collection, a backend for data processing and inference, and a user interface for verification of inferences (e.g., modes, activities, times, etc.). FMS, has been deployed in several cities of the global north, including Singapore. This paper assesses the first use of FMS in a city of the global south, Dar es Salaam. FMS in Dar was implemented over a 1-month period, among 581 adults chosen from 300 randomly selected households. Individuals were provided phones with data plans and the FMS app preloaded. Verification of the collected data occurred every 3 days, via a phone interview. The experiment reveals various social and technical challenges. Models of individual likelihood to participate suggest little bias. Several socioeconomic and demographic characteristics apparently do influence, however, the number of days fully verified per individual. Similar apparent biases emerge when predicting the likelihood of a given day being verified. Some risk of non-random, non-response is, thus, evident.     

Biogeography-based combinatorial strategy for efficient autonomous underwater vehicle motion planning and task-time management

Autonomous Underwater Vehicles (AUVs) are capable of spending long periods of time for carrying out various underwater missions and marine tasks. In this paper, a novel conflict-free motion planning framework is introduced to enhance underwater vehicle’s mission performance by completing maximum number of highest priority tasks in a limited time through a large scale waypoint cluttered operating field, and ensuring safe deployment during the mission. The proposed combinatorial route-path planner model takes the advantages of the Biogeography-Based Optimization (BBO) algorithm toward satisfying objectives of both higher-lower level motion planners and guarantees maximization of the mission productivity for a single vehicle operation. The performance of the model is investigated under different scenarios including the particular cost constraints in time-varying operating fields. To show the reliability of the proposed model, performance of each motion planner assessed separately and then statistical analysis is undertaken to evaluate the total performance of the entire model. The simulation results indicate the stability of the contributed model and its feasible application for real experiments.     

Some insights in novel risk modeling of liquefied natural gas carrier maintenance operations

This study discusses the analysis of various modeling approaches and maintenance techniques applicable to the Liquefied Natural Gas (LNG) carrier operations in the maritime environment. Various novel modeling techniques are discussed; including genetic algorithms, fuzzy logic and evidential reasoning. We also identify the usefulness of these algorithms in the LNG carrier industry in the areas of risk assessment and maintenance modeling.