Numerical simulation on truncated oval-nosed projectile penetrating into stiffened plate北大核心CSCD

[Objectives]In this paper, the numerical simulation method is used to study the anti-penetration performance and energy absorption mode of a stiffened plate, as well as the influence of different stiffened bars on the flight attitude of the projectile body.[Methods] Finite element software LS-DYNA is used to simulate the process of a truncated oval-nosed projectile penetrating a stiffened plate, and the results of the numerical simulation are compared with an experiment to verify the reliability of the numerical simulation method. The momentum method and mass equivalence method are used to predict the residual velocity of the projectile, and the applicability of different theoretical methods within different velocity ranges is compared. The deformation energy of different regions of the stiffened plate is then extracted to analyze the influence of the initial velocity of the projectile body on the energy absorption mode of the target plate. Finally, the structure of the stiffeners is changed and the influence of the relative position of the stiffeners on the penetration attitude of the projectile body is analyzed.[Results]The results show that the mass equivalence method is more accurate than the momentum method in predicting the residual velocity of the stiffened plate when the initial velocity of the projectile body is in the range of 300–900 m/s. The ratio of the deformation energy of the stiffened plate to the energy loss of the projectile body decreases with the increase of the initial velocity of the projectile body. The effect of a T-stiffened plate on trajectory is greater than that of a rectangular-stiffened plate.[Conclusions]The related calculation method and research results have certain reference value for research and engineering application surrounding the anti-penetration of stiffened plates. © 2023 Chinese Journal of Ship Research. All rights reserved.     

An application of a rank ordered probit modeling approach to understanding level of interest in autonomous vehicles

Surveys of behavior could benefit from information about people’s relative ranking of choice alternatives. Rank ordered data are often collected in stated preference surveys where respondents are asked to rank hypothetical alternatives (rather than choose a single alternative) to better understand their relative preferences. Despite the widespread interest in collecting data on and modeling people’s preferences for choice alternatives, rank-ordered data are rarely collected in travel surveys and very little progress has been made in the ability to rigorously model such data and obtain reliable parameter estimates. This paper presents a rank ordered probit modeling approach that overcomes limitations associated with prior approaches in analyzing rank ordered data. The efficacy of the rank ordered probit modeling methodology is demonstrated through an application of the model to understand preferences for alternative configurations of autonomous vehicles (AV) using the 2015 Puget Sound Regional Travel Study survey data set. The methodology offers behaviorally intuitive model results with a variety of socio-economic and demographic characteristics, including age, gender, household income, education, employment and household structure, significantly influencing preference for alternative configurations of AV adoption, ownership, and shared usage. The ability to estimate rank ordered probit models offers a pathway for better utilizing rank ordered data to understand preferences and recognize that choices may not be absolute in many instances.     

襄阳汉江沉管隧道设计关键技术北大核心CSCD

基于襄阳汉江沉管隧道的工程设计实践,针对该隧道强冲刷、强透水地层深厚、防洪要求高等特点,对隧道平纵布置、管节及接头止水结构、干坞选型及结构、沉管基础及回填、沉管最终接头及对接端止水结构等进行了研究。结果表明:(1)内河沉管隧道采用长距离双轴线干坞布置方式,通过格形地下连续墙、超深落底式帷幕、地下连续墙预应力锚索垂直支护和混凝土封底组合技术解决了强透水地层深基坑支护及隔水难题;(2)采用全断面顺浇技术进行整体式管节预制,实现了管节接头止水设施的全国产化;(3)在内河沉管隧道采用高精度浮式整平先铺卵石基础,并提出了强冲刷区管顶防冲保护解决方案;(4)采用了不设独立止推构造的陆域最终接头,并针对工程需求设置了大直径锁口钢管桩配合外侧止水墙的对接端支护结构及分片整体吊装双壁钢围堰二次止水结构。     

Galvanic corrosion behaviour of HE 20 / MDN 138 & HE 20 / MDN 250 alloys in natural seawater

In view of their excellent mechanical properties, workability and heat treatment characteristics, MDN 138 & MDN 250 have been widely used in missile, rocket and aerospace industries. With light weight and high performance characteristics HE 20 aluminium alloy acts as an important material in defence and aerospace applications. The galvanic corrosion behaviour of the metal combinations HE 20 / MDN 138 and HE 20 / MDN 250, with 1:1 area ratio, has been studied in natural seawater using the open well facility of CECRI’s Offshore Platform at Tuticorin for a year. The open circuit potentials of MDN 138, MDN 250 and HE 20 of the individual metal, the mixed potential and galvanic current of the couples HE 20 / MDN 138 and HE 20 / MDN 250 were periodically monitored throughout the study period. The calcareous deposits on MDN 138 and MDN 250 were analysed using XRD. The results of the study reveal that that HE 20 has offered required amount of protection to MDN 138 & MDN 250.     

Evaluating the impact of PSC inspectors’ professional profile: a case study of the Spanish Maritime Administration

Full-scale globalisation of trade has been accompanied by a progressive liberalisation of maritime transport. The proliferation of open registries has created a situation in which Port State Control (PSC) has become much more effective than the feeble or non-existent control exercised by those States. This study has been conducted on the influence of the professional profile of inspectors on inspection results. The objective of our paper was to evaluate the impact of PSC inspectors’ professional profile by conducting a case study of the Spanish Maritime Administration. The paper concludes with a discussion of the correlation between deficiencies detected and professional profiles.     

The influence of parents’ travel patterns,perceptions and residential self-selectivity to their children travel mode shares

Using the UK National Travel Survey from 2002 to 2006, this paper investigates the influence of households’ residential self-selectivity, parents’ perceptions on accessibilities and their travel patterns on their children daily travel mode share. In doing this, this study introduces a model structure that represents the complex interactions between the parents’ travel patterns, their perceptions on public transport services and their reported residential self-selectivity reasons and the children travel mode shares. This structure is analysed with structural equation modelling. The model estimation results show that parents’ residential self-selectivity, parents’ perceptions and satisfactions on accessibilities and their daily travel patterns significantly influence the children’s daily travel mode shares. However, the effects are not uniform across household members. This study has revealed that households’ residential self-selectivity behaviours have more correlations with the children’s non-motorised mode shares, whilst the parents’ perceptions and satisfactions on transport infrastructure and public transport service qualities have more correlations with parents’ mode shares. The results also confirm that parents’ non-motorised modes use in travelling is highly correlated with the children’s physically active travel mode shares. However, at the same time, the results also show that the effects of mothers’ car use to the children travel mode shares is more apparent than fathers’.     

Mathematical model for optimising the sequence for clearing snow from the manoeuvring area during winter operations

This article considers the optimisation of the sequence for clearing snow from stretches of the manoeuvring area of an airport. This issue involves the optimisation of limited resources to remove snow from taxiways and runways thereby leaving them in an acceptable condition for operating aircraft. The airfield is divided into subsets of significant stretches for the purpose of operations and target times are established during which these are open to aircraft traffic. The document contains several mathematical models each with different functions, such as the end time of the process, the sum of the end times of each stretch and gap between the estimated and the real end times. During this process, we introduce different operating restrictions on partial fulfilment of the operational targets as applied to zones of special interest, or relating to the operation of the snow‐clearing machines. The problem is solved by optimisation based on linear programming. The article gives the results of the computational tests carried out on five distinct models of the manoeuvring area, which cover increasingly complex situations and larger areas. The mathematical model is particularised for the case of the manoeuvring area of Adolfo Suarez Madrid—Barajas Airport. Copyright © 2016 John Wiley & Sons, Ltd.

Highlights
• Optimal sequence for clearing snow from the manoeuvring area of an airport.
• Contains optimising algorithms solved using CPLEX LP‐based tree search.
• Restrictions on partial fulfilment of operational targets applied to subsets of significant stretches, used for planning the operation of snow‐clearing machines.
• Model applied to the case of the manoeuvring area of Adolfo Suárez Madrid Barajas Airport.
• Conclusions are given on the results of the computational tests carried out. There are five models of the manoeuvring area which cover increasingly complex situations and larger areas.

     

Clamping performance of fastener in windshield wiper assembly using theoretical and experimental methods

Improper clamping of wiper arms can cause problems in the operation of the wiper. An excessive clamping force can cause damage to the wiper arm head. On the other hand, an insufficient clamping force can cause self-loosening of the nut. Given the lack of direct research on the clamping force of the fastener in wiper assembly, this study verifies the existing clamping performance of the fastener in windshield wiper assembly by theoretical and experimental methods. The theoretical calculation results show that all the clamping performance are satisfied under the general snow load condition. However, under the critical load condition, maximum assembly preload and safety margin against slipping are in disagreement with the standard values. This problem is solved by increasing the strength grade of the bolt. The experimental results show a reducing tendency of the clamping force during the snow durability test. However, this reducing clamping force during the 60,000 test cycles is acceptable. In the case of nut reusing more than two times possibly cause a problem of its loosening because of insufficient clamping force. Therefore, it is recommended that the nut should not be reused more than two times.     

One-dimensional model on fuel penetration in diesel sprays with gas flow

In diesel engine, spray penetration is usually changed by in-cylinder gas flow. Accurate prediction on diesel spray with gas flow is important to the optimal design of diesel fuel injection system. This paper presents a theory investigation focusing on the penetration of diesel spray with gas flow. In order to understand the effect of gas flow on the penetration of diesel spray, a one-dimensional spray model is developed from an idealized diesel spray, which is able to predict the spray behavior under different gas flow conditions. The ambient gas flow is simplified as ideal flow that has only constant flow velocity along x-axial and y-axial directions of spray. The x-axial and y-axial directions are respectively defined as along and vertical spray directions. The main assumption is that the y-axial direction gas flow has no effect on the penetration of spray along x-axial direction. The principles of conservation of mass and momentum are used in the derivation. Momentum of in-cylinder air flow is also taken into consideration. Validation of the model at stable condition is achieved by comparing model predictions with experimental measurements of diesel spray without gas flow from Naber's experiments. Furthermore, CFD simulations on penetration of diesel spray with gas flow were performed with the commercial code AVL-fire. The onedimensional model is validated by the penetration results with gas flow from CFD calculation. Results show that a reasonable estimation of the spray evolution can be obtained for both with and without ambient gas flow conditions.