Multi-objective optimization of quarter-car models with a passive or semi-active suspension system

A systematic methodology is applied in an effort to select optimum values for the suspension damping and stiffness parameters of two degrees of freedom quarter-car models, subjected to road excitation. First, models involving passive suspension dampers with constant or dual rate characteristics are considered. In addition, models with semi-active suspensions are also examined. Moreover, special emphasis is put in modeling possible temporary separations of the wheel from the ground. For all these models, appropriate methodologies are employed for capturing the motions of the vehicle resulting from passing with a constant horizontal speed over roads involving an isolated or a distributed geometric irregularity. The optimization process is based on three suitable performance criteria, related to ride comfort, suspension travel and road holding of the vehicle and yielding the most important suspension stiffness and damping parameters. As these criteria are conflicting, a suitable multi-objective optimization methodology is set up and applied. As a result, a series of diagrams with typical numerical results are presented and compared in both the corresponding objective spaces (in the form of classical Pareto fronts) and parameter spaces.     

Nonlinear three-dimensional wagon-track model for the investigation of rail corrugation initiation on curved track

A nonlinear wagon-track model on curved track has been developed to characterize rail corrugation formation due to self-excitation of the wheel-rail stick-slip process. In this model, wagon movements were described using up to 78 degrees of freedom (DOFs) to model a three-piece freight bogie. Innovatively, the wheelset movements are described using nine DOFs, including torsional and bending modes about the longitudinal and vertical directions. The track modelling is considered as a one-layer structure (two rail beams on discrete spring and damper elements). The wheel sliding after creepage saturation is considered in the wheel-rail interface modelling. Simulation of a case study shows that the frequencies of the wheel stick-slip process are composed of the basic frequency, which might come from the combined effect of sleeper-passing frequency and one-third of the combined torsional and bending frequency of the wheelset, and the double and triple basic frequencies, which form the wavelengths of rail corrugation at different situations.     

An algorithm for finding reasonable paths in transit networks

In this paper, reasonable paths in transit networks are defined as possible paths that satisfy the acceptable time criterion and transfer‐walk criterion. A recursive algorithm for finding all of the reasonable paths in a transit network that does not involve a rapid increase in program run‐time with network size is presented. Realistic transit networks in Hong Kong and Guangzhou were selected as case studies of the different phases of the development of a trip planning system. Transport planning practitioners and potential users were invited to test the system to evaluate its performance. The results of the prototype evaluation were satisfactory, and the viability of the system as a useful tool for supporting decision‐making has been confirmed by the positive feedback that was obtained from survey questionnaires.     

An analysis of the determinants of children’s weekend physical activity participation

This paper examines the out-of-home, weekend, time-use patterns of children aged 5–17 years, with a specific emphasis on their physical activity participation. The impact of several types of factors, including individual and household demographics, neighborhood demographics, built environment characteristics, and activity day variables, on physical activity participation is analyzed using a joint nested multiple discrete–continuous extreme value-binary choice model. The sample for analysis is drawn from the 2000 San Francisco Bay Area Travel Survey. The model developed in the paper can be used to assess the impacts of changing demographics and built environment characteristics on children’s physical activity levels.     

Optimal Preview Control of a Two-dof Vehicle Model Using Stochastic Optimal Control Theory

An optimal preview control algorithm is applied to a two degree of freedom(dof) vehicle model travelling with constant velocity on a randomly profiled road. The road roughness is modelled as a homogeneous random process being the output of a linear first order filter to white noise. The input from the road irregularity is assumed to be measured at some distance in front of the vehicle and this measured infonnation is utilized by the active controller to prepare the system for the ensuing input. The preview control algorithm is obtained by minimizing a quadratic performance index and by describing the average behaviour of the system by the covariance matrix of the vehicle response state vector. Results are presented for full state feedback and significant improvements in sprung mass acceleration, suspension working space and road holding are observed.     

Preview Control Algorithms for the Active Suspension of an Off-Road Vehicle

The potential performance improvement using preview control for active vehicle suspension was first recognized in the late nineteen sixties. All work done since that time has been based on optimal control theory using simple vehicle models.

In this article, the performance of quarter vehicle preview controllers when applied to a real off-road vehicle is simulated using both two degree of freedom quarter and ten degree of freedom full vehicle models. The results, which are compared with non-preview active and conventional passive suspensions, confirm that preview control reduces vertical acceleration of the body centre of gravity, which results in improved ride quality. Further, reductions in pitch and roll motion result from smaller vertical displacements of the vehicle quarters. Coupling between quarters, through the vehicle body, appears to have a smoothing effect on the control.

As an alternative to optimal control theory based controllers, a simple ad hoc preview controller based on isolating the vehicle body from dynamic loads transmitted through the suspension is proposed. Simulation results show that such a controller outperforms the optimal control theory based controllers over small discrete disturbances but responds poorly to disturbances encountered from other than steady state.     

Identification Methods for Vehicle System Dynamics

The paper presents a survey on parameter identification techniques for complex vehicle models. In order to cope with the complexity of the model, the information on the system available from the equations of motion has to be included in the identification process. Basic methods for the solution of this problem are shown. The application of the approach is demonstrated by identification of the vertical automobile dynamics. It is concluded that the presented techniques will become more important with increasing applications of theoretical modeling in vehicle system dynamics.     

Short-term Hourly Traffic Forecasts using Hong Kong Annual Traffic Census

The need for acquiring the current-year traffic data is a problem for transport planners since such data may not be available for on-going transport studies. A method is proposed in this paper to predict hourly traffic flows up to and into the near future, using historical data collected from the Hong Kong Annual Traffic Census (ATC). Two parametric and two non-parametric models have been employed and evaluated in this study. The results show that the non-parametric models (Non-Parametric Regression (NPR) and Gaussian Maximum Likelihood (GML)) were more promising for predicting hourly traffic flows at the selected ATC station. Further analysis encompassing 87 ATC stations revealed that the NPR is likely to react to unexpected changes more effectively than the GML method, while the GML model performs better under steady traffic flows. Taking into consideration the dynamic nature of the common traffic patterns in Hong Kong and the advantages/disadvantages of the various models, the NPR model is recommended for predicting the hourly traffic flows in that region.     

Effects of economic disincentives on private car use

A field experiment was conducted to investigate the effects of economic disincentives on private car use. Eighty two-adult households who were owners of at least one car were randomly assigned to three experimental groups and one control group. Both experimental and control groups logged their car trips during one week before, one week during, and one week after treatment. The treatment consisted of charging two of the experimental groups approximately 100% of normal cost per kilometer of driving during 2 weeks, and charging the third experimental group this amount per kilometer of driving during 4 weeks. With the purpose of investigating whether deliberate planning increases the effect of economic disincentives, the households in one of the former and in the latter group were asked to fill out a prospective car log for the following week. The control group was not charged or requested to fill out a prospective car log but was in other respects treated in the same way. Analyses of the car logs and odometer readings during and at the end of treatment showed a weak reduction of car use due to the economic disincentives that however were almost completely dependent on planning.     

Neuro-Fuzzy Control of a Tracked Vehicle Featuring Semi-Active Electro-Rheological Suspension Units

This paper presents vibration control of a tracked vehicle installed with electro-rheological suspension units (ERSU). As a first step, an in-arm type ERSU is designed, and its spring and damping characteristics are evaluated with respect to the intensity of electric fields. Subsequently, a 16 degree-of-freedom model for a tracked vehicle equipped with the proposed ERSU is established followed by the formulation of a neuro-fuzzy controller. This controller takes account for both ride quality and steering stability by adopting a weighting parameter between two performance requirements. The parameter is appropriately determined by employing a fuzzy algorithm associated with two fuzzy variables: the vertical speed of the body and the rotational angular speed of the wheel. Control performances to isolate unwanted vibration from bump and random road excitations are evaluated through computer simulations. In addition, maximum speed of the vehicle with 6 Watt power absorption is investigated with respect to the road roughness.