电流变流体的润滑性能研究

提出了电流变流体作为润滑剂使用的新设想，研究了电流变流体粘度的可控特性，通过试验获得了电流变流体摩擦力随电场强度、悬浮颗粒浓度、油膜厚度等因素的变化规律，为深入研究电流变流体的润滑特性奠定了基础。     

Role of filtering and biodeposition by Adamussium colbecki in circulation of organic matter in Terra Nova Bay (Ross Sea, Antarctica)

At Terra Nova Bay, the scallop Adamussium colbecki (Smith, 1902) characterises the soft and hard bottoms from 20 to 80 m depth, constituting large beds and reaching high values of density (50–60 individuals/m²) and biomass (120 g/m² DW soft tissues). To assess its role in the organic matter recycling in the coastal ecosystem, its filtering and biodeposition rates were evaluated in laboratory experiments during the austral summer 1993/94. Filtration rates, measured in a flow-through system, were calculated from the difference in particulate organic carbon (POC), nitrogen (PON) and chlorophyll-a (Chl-a) concentration in inflow and outflow water. Experiments were performed using natural sea water with POC, PON and Chl-a concentrations of about 450 μg/l, 90 μg/l and 2 μg/l, respectively. The biodeposition rate and the biochemical composition of the biodeposits were studied in order to detect how the organic matter is transformed through feeding activity of A. colbecki. At +1°C temperature, the average filtering rate was about 1 l h⁻¹ g⁻¹ (DW soft tissues) in specimens ranging in body mass from 2 to 3 g (DW soft tissues) and 6–7 cm long. The biodeposition rate in 3–8 cm long specimens, ranging from 0.4 to 5.7 g (DW soft tissues), was about 5.65 mg DW/g DW/day, leading to an estimate of Corg flux, through biodeposition by A. colbecki, of about 21 mg C m⁻² day⁻¹ at in situ conditions. Comparison between the biochemical composition of seston and biodeposits shows a decrease of the labile compounds, of the Chl-a/phaeopigments ratio in the biodeposits. The recorded C/N ratio decrease suggests a microbial colonisation in the biodeposits. This study suggests that Adamussium colbecki plays an important role in coupling the material fluxes from the water column to the sea bed, processing about 14% of total Carbon flux from the water column to the sediments, with an assimilation efficiency of 36%.     

The economics of technological change in shipping

Management of technological change is among the most important problems in shipping management. Models representing the economic impact of technological change in shipping are presented and the use of technology productivity analysis as a method for effective management of technological change in shipping is proposed.     

Management of coastal eutrophication: Integration of field data, ecosystem-scale simulations and screening models

A hybrid approach for eutrophication assessment in estuarine and coastal ecosystems is presented. The ASSETS screening model (http://www.eutro.org) classifies eutrophication status into five classes: High (better), Good, Moderate, Poor and Bad (worse). This model was applied to a dataset from a shallow coastal barrier island system in southwest Europe (Ria Formosa), with a resulting score of Good. A detailed dynamic model was developed for this ecosystem, and the outputs were used to drive the screening model. Four scenarios were run on the research model: pristine, standard (simulates present loading), half and double the current nutrient loading. The Ria Formosa has a short water residence time and eutrophication symptoms are not apparent in the water column. However, benthic symptoms are expressed as excessive macroalgal growth and strong dissolved oxygen fluctuations in the tide pools. The standard simulation results showed an ASSETS grade identical to the field data application. The application of the screening model to the other scenario outputs showed the responsiveness of ASSETS to changes in pressure, state and response, scoring a grade of High under pristine conditions, Good for half the standard scenario and Moderate for double the present loadings. The use of this hybrid approach allows managers to test the outcome of measures against a set of well-defined metrics for the evaluation of state. It additionally provides a way of testing and improving the pressure component of ASSETS. Sensitivity analysis revealed that sub-sampling the output of the research model at a monthly scale, typical for the acquisition of field data, may significantly affect the outcome of the screening model, by overlooking extreme events such as occasional night-time anoxia in tide pools.     

Improving the predictiveness of the quasi-d combustion model for spark ignition engines with flexible intake systems

Fast and predictive simulation tools are prerequisites for pursuing simulation based engine control development. A particularly attractive tradeoff between speed and fidelity is achieved with a co-simulation approach that marries a commercial gas dynamic code WAVE™ with an in-house quasi-dimensional combustion model. Gas dynamics are critical for predicting the effect of wave action in intake and exhaust systems, while the quasi-D turbulent flame entrainment model provides sensitivity to variations of composition and turbulence in the cylinder. This paper proposes a calibration procedure for such a tool that maximizes its range of validity and therefore achieves a fully predictive combustion model for the analysis of a high degree of freedom (HDOF) engines. Inclusion of a charge motion control device in the intake runner presented a particular challenge, since anything altering the flow upstream of the intake valve remains “invisible” to the zero-D turbulence model applied to the cylinder control volume. The solution is based on the use of turbulence multiplier and scheduling of its value. Consequently, proposed calibration procedure considers two scalar variables (dissipation constant C _β and turbulence multiplier C _M ), and the refinements of flame front area maps to capture details of the spark-plug design, i.e. the actual distance between the spark and the surface of the cylinder head. The procedure is demonstrated using an SI engine system with dual-independent cam phasing and charge motion control valves (CMCV) in the intake runner. A limited number of iterations led to convergence, thanks to a small number of adjustable constants. After calibrating constants at the reference operating point, the predictions are validated for a range of engine speeds, loads and residual fractions.     

Spatial variability of the barotropic M2 constituent tidal current over the Rías Baixas Galician shelf (NW Spain)

Using current meters and systematically repeated vessel mounted ADCP data legs, we describe the role of the semidiurnal and diurnal constituents in the tidal currents and investigate the mesoscale variability of the M₂ tidal currents field along three cross-shelf legs over the Galician shelf. We found that the estimated values of the semi-major axes of the main semidiurnal tidal constituents are closely related to those obtained in previous research and that the tidal currents are predominantly semidiurnal. Amplitudes of the M₂ and S₂ semi-major axes constituents are comparable, and important fortnightly variability should thus be expected in the amplitude of the semidiurnal tidal currents. Vertical profiles of the semi-major axes of the main tidal constituents reveal that, in the absence of stratification, and far from the bottom frictional effects, the tidal currents are mostly barotropic. Over the slope, the tidal ellipses tilt from a north–south orientation toward the northeast–southwest direction and, as we go further into the shelf, their amplitude is increased, a feature that is reasonably explained by the transition from the dynamics of a Poincaré wave offshore to the dynamics of a northward alongshore propagating Kelvin wave over the shelf. The Ría de Vigo exerts a notable influence over the tidal currents, acting as an extension of the shelf and introducing a meridional variation in the orientation of the ellipses from the alongshore direction in the southern straight coast toward the northeast–southwest direction at the latitude of the Rías. Finally, the spatial fitting methods we tried have proved to be successful in VMADCP data detiding in this region.     

Experimental investigation using CFD for thermal performance of ventilated disc brake rotor

In the present work, different ventilated disc brake rotor configurations were analysed to enhance the heat transfer rate and obtain the uniform temperature distribution in the rotor. CFD code used in this work was validated at using experimental results obtained by conducting experiments on a test rig. The experimental analysis was performed to calculate the mass flow rate and heat dissipation through the rotor. Further, different types of rotor configurations viz. straight radial vane (SRV), tapered radial vane (TRV), alternate long and short vane (ALSV), variable diameter circular pillars (VDCP) were considered for the analysis. A rotor segment of 20° was considered for the numerical analysis due to its rotational symmetry. CFD results were in good agreement with the experiments. The maximum deviation of the numerical results were about 12 % from the experimental results. It is found from the analysis that among the different types of rotor configurations; variable diameter circular pillars (VDCP) rotor gives better rate of heat dissipation with more uniform temperature distribution in the flow passages. Hence for modern high speed vehicles VDCP rotor may be more appropriate.     

Perturbation/correlation based optimal internal combustion engine tuning

This paper addresses the application of the perturbation/correlation method to optimizing the torque output of internal combustion engines. This application was inspired by observations of the limitations in current techniques of the automotive performance tuning industry. Performance issues such as errors from true optimum spark timing and fuel injector pulse width values as well as convergence were considered for optimal tuning. The ability of the system to deal with engine cycle-to-cycle variations and their effect on input parameters is also analyzed.     

Factors affecting the environmental impact of pavement wear

Wear at the interface between flexible pavements and tires influences pavement life, pavement cycle costs, and tire consumption, and is a source of environmental harm. Wear-related processes evolve over time and are affected by a number of boundary conditions, such as interface fluids, water and fuels. We develop a model explaining and predicting mass losses in flexible pavements under carefully controlled conditions, and with estimation of the related environmental costs. We also employed an accelerated loading test. Under normal conditions, the environmental impact of pavement wear is not greatly influenced by mix type or volumetrics. Indeed, the presence of hazmat materials, traditional, dense mixes have an environmental impact that is appreciably lower than that of porous European mixes.     

Equilibria of bilateral taxi–customer searching and meeting on networks

This paper proposes an equilibrium model to characterize the bilateral searching and meeting between customers and taxis on road networks. A taxi driver searches or waits for a customer by considering both the expected searching or waiting time cost and ride revenue, and a customer seeks a taxi ride to minimize full trip price. We suppose that the bilateral taxi–customer searching and meeting occurs anywhere in residential and commercial zones or at prescribed taxi stands, such as an airport or a railway station. We propose a meeting function to spell out the search and meeting frictions that arise endogenously as a result of the distinct spatial feature of the area and the taxi–customer moving decisions. With the proposed meeting function and the assumptions underlying taxi–customer search behaviors, the stationary competitive equilibrium achieved at fixed fare prices is determined when the demand of the customers matches the supply of taxis or there is market clearing at the prevailing searching and waiting times in every meeting location. We establish the existence of such an equilibrium by virtue of Brouwer’s fixed-point theorem and demonstrate its principal operational characteristics with a numerical example.