高速铁路声屏障在列车脉动风载荷下的强度计算

为了得到高速列车声屏障在列车经过时的受力规律,建立了声屏障的外流场模型和有限元模型。利用流固耦合技术,计算分析了声屏障的三维动态流场和结构模型,得到了列车风气动力特性和H钢立柱的受力规律。计算结果表明:列车经过时声屏障受到的压力为一个随时间变化且不均匀分布的面载荷。H钢立柱发生弯扭组合变形,弯矩扭矩各经历两次换向。每当列车经过一次,等效应力产生四个脉冲。H钢立柱受到的应力不大,可能出现疲劳破坏。     

一种改进的快速压缩跟踪算法

为研究目标跟踪问题,构造多种不同尺度的滤波器对目标进行滤波,生成目标高维特征;利用符合有限等距性质要求的稀疏矩阵对高维特征进行采样,获得目标低维特征.采用朴素贝叶斯分类器输出与Bhattacharyya系数乘积的形式作为目标与候选目标之间的相似性度量,并选择最大值所对应的候选目标作为下一帧中的目标.文中提出了一种改进的快速压缩跟踪算法.实验表明,该改进的算法能够对目标进行有效跟踪.     

Lagrangian flow in the California Undercurrent, an observation and model comparison

During the period 1992–1998, 38 isobaric RAFOS floats were deployed to sample the subsurface flow of the California Undercurrent. The deployments, released over the California continental slope west of San Francisco, have sampled robust year-round poleward subsurface flow associated with the Undercurrent most seasons and the combined inshore current and Undercurrent in winter. Two other types of flow have been seen: a region of weak flow with little net displacement just west of the California Undercurrent, and an active westward propagating eddy field. This eddy field appears to be the primary mechanism for moving floats from the Undercurrent into the ocean interior. The observations and statistics from the RAFOS floats are compared with Lagrangian estimates of particles tracked in a global high resolution ocean simulation in order to evaluate the fidelity of the model along an eastern boundary. The results show that the model reproduces the general character of the flow reasonably well, but underestimates both the mean and eddy energies by a substantial amount.     

车用柴油机NO_x形成及控制

相对汽油发动机污染物排放,柴油发动机CO和CH的排放较低,不到汽油机的10%,但NOX排放水平却高于汽油发动机。本文重点讨论柴油发动机排气污染物中NOx的成分及危害,分析了NO的生成机理及影响因素,提出了控制柴油机NO排放的技术和方法。     

柴油机典型工况的电控喷油器多次喷射分配

为提高柴油机节能减排的效果,简要分析了多次喷射形式及其作用,依据车辆在不同路况运行,确定了车辆对应的6种柴油机典型工况。提出了基于工况排放值约束的多次喷射分配方法,采用工况排放分摊率确定典型工况的排放限值,进行喷射次数和变化喷射组合寻优,最后结合4JB1高压共轨柴油机台架试验,以氮氧化物和烟度为衡量参数,兼顾燃油消耗率的变化,分析不同喷射组合对柴油机排放的影响。结果表明:怠速工况和中速大负荷工况宜用2次喷射,低速小负荷工况和中速中负荷工况宜用3次喷射,中速小负荷工况宜用4次喷射,高速大负荷工况宜用1次喷射,说明基于工况排放值约束的多次喷射分配方法是有效的。     

水力式升船机运行安全重要风险源风险分析*

水力式升船机是高坝通航建筑物的一种新形式,在国内外没有运行经验可供借鉴。为保障水力式升船机安全可靠运行,针对重要风险源风险评价的模糊性难题,通过构建水力式升船机重要风险源因子事故树,辨识水力式升船机运行风险因子及其逻辑关系,提出基于模糊理论的水力式升船机运行安全重要风险源风险分析方法。以景洪水力式升船机为例,定量分析风险因子的风险等级,对水力系统、机械系统重要风险源进行安全风险评价。结果表明,该方法能够客观地评价风险,可为水力式升船机运行风险预警和管理提供技术支撑。     

Identifying optimal data aggregation interval sizes for link and corridor travel time estimation and forecasting

With the recent increase in the deployment of ITS technologies in urban areas throughout the world, traffic management centers have the ability to obtain and archive large amounts of data on the traffic system. These data can be used to estimate current conditions and predict future conditions on the roadway network. A general solution methodology for identifying the optimal aggregation interval sizes for four scenarios is proposed in this article: (1) link travel time estimation, (2) corridor/route travel time estimation, (3) link travel time forecasting, and (4) corridor/route travel time forecasting. The methodology explicitly considers traffic dynamics and frequency of observations. A formulation based on mean square error (MSE) is developed for each of the scenarios and interpreted from a traffic flow perspective. The methodology for estimating the optimal aggregation size is based on (1) the tradeoff between the estimated mean square error of prediction and the variance of the predictor, (2) the differences between estimation and forecasting, and (3) the direct consideration of the correlation between link travel time for corridor/route estimation and forecasting. The proposed methods are demonstrated using travel time data from Houston, Texas, that were collected as part of the automatic vehicle identification (AVI) system of the Houston Transtar system. It was found that the optimal aggregation size is a function of the application and traffic condition.

基于国六排放标准的天然气发动机试验研究

在发动机排放试验台上,对一台天然气发动机按照国六排放标准和国五排放标准分别进行了WHTC 循环试验和ETC 循环试验,进行了气体污染物排放的比较研究。结果表明,WHTC 循环条件下,冷启动试验的CH₄和NO_x排放高于热启动试验,NH₃排放低于热启动试验。冷启动试验的CH₄、NO_x排放量占冷+热加权试验结果的比重分别为47.10%和48.92%,与WHTC循环冷启动+热启动试验加权结果相比,ETC循环试验的CH₄和NO_x排放有显著的下降,NH₃排放有一定的增加。     

CFD Analysis of Ship-to-Ship Hydrodynamic Interaction

A numerical study of ship-to-ship interaction forces is performed using a commercial CFD code, and the results are compared with experimental data and with the results of a panel method analysis. Two ship models have been used in the interaction forces analysis: a tug and a tanker, advancing parallel to each other with different lateral distances and two different values of the fluid depth. Computations are carried out with four different flow models: inviscid and viscous flow with the free surface modeled as a rigid wall and inviscid and viscous flow with the deformable free surface. A fair agreement was obtained with available experimental data and results obtained by panel method. The influence of viscosity in the computations is found to be comparatively weak, while the wavemaking effects may be important, at small magnitude of the horizontal clearance.