南海某FPSO STP单点系泊系统的再评估

本文针对一艘中国南海北部服役的STP(Submerged Turret Production)内转塔单点FPSO在极端环境条件下单点静密封失效问题进行了分析。STP浮筒静密封主要依靠浮筒上端液压大钳的预紧力、浮筒与舱壁的静摩擦力等来抵抗系泊系统的载荷,从而保证浮筒与船体舱壁的紧密贴合。本文进行了新旧百年一遇环境条件作用下系泊系统载荷评估分析,比较结果可以发现：在新的百年一遇条件作用下,单点系泊系统的最大系泊缆张力增加31%,相应地系泊系统作用在锚链盘的平面载荷增加33%,垂向载荷增加12%。进一步地进行了新环境条件下两百年一遇极端环境作用下的系泊系统响应分析,比较结果可以发现：两百年一遇环境条件作用下,平台平面位移、系泊缆最大张力以及系泊载荷均出现了不同程度的增加,此时系泊缆已不能满足系泊系统完整状态的安全系数要求。分析结果表明：该FPSO的STP静密封系统在新的环境条件下存在较大失效风险,有必要对液压锁紧装置进行优化和加强设计,浮筒与舱壁有必要重新进行结构强度评估。     

腰沙围垦一、二期通道工程环保措施

以腰沙一、二期通道工程为例,从项目对周边环境、工程的影响出发,就施工期的施工方案、固废处理、生物保护,营运期的相关影响等提出一系列优化措施,将环境危害降至最低。     

Incorporating the extended theory of planned behavior in a school travel mode choice model: a case study of Shaoxing,China

Travel to and from school can have social, economic, and environmental implications for students and their parents. Therefore, understanding school travel mode choice behavior is essential to find policy-oriented approaches to optimizing school travel mode share. Recent research suggests that psychological factors of parents play a significant role in school travel mode choice behavior and the Multiple Indicators and Multiple Causes (MIMIC) model has been used to test the effect of psychological constructs on mode choice behavior. However, little research has used a systematic framework of behavioral theory to organize these psychological factors and investigate their internal relationships. This paper proposes an extended theory of planned behavior (ETPB) to delve into the psychological factors caused by the effects of adults’ cognition and behavioral habits and explores the factors’ relationship paradigm. A theoretical framework of travel mode choice behavior for students in China is constructed. We established the MIMIC model that accommodates latent variables from ETPB. We found that not all the psychological latent variables have significant effects on school travel mode choice behavior, but habit can play an essential role. The results provide theoretical support for demand policies for school travel.     

基于模型参考自适应的电动车用内置式永磁同步电机电感参数辨识技术研究

内置式永磁同步电机(IPMSM)由于其优良的转矩特性和宽广的调速范围而广泛运用于电动汽车电驱系统。与表贴式永磁同步电机(SMPSM)不同,IPMSM转子具有强烈的凸极效应。因此其控制方式相较表贴式更为复杂,需要更加精确的电机数学模型。但是由于饱和效应和交叉耦合,电感参数会随运行工况变化而发生变化,从而影响系统控制精度,所以能够实时掌握内置式永磁同步电机电感参数是非常重要的。本文采用模型参考自适应算法(MRAS)实现IPMSM电感参数在线辨识,运用Runge Kutta离散化方法建立可调模型,依据Popov超稳定性定理推导出自适应律。仿真结果表明,采用MRAS的在线参数辨识算法可以准确、实时地辨识出IPMSM的交、直轴电感。     

舰船中压直流综合电力推进系统稳态分析研究

本文对舰船中压直流综合电力推进系统进行稳态分析。首先,根据舰船中压直流综合电力系统基本特点,选定直流分层前推回代法作为基本方法加以改进;同时,提出了适用于该方法的支路计算等效模型,并将上述思想进行程序实现。通过算例分析结果可知,论文所提出的基于直流分层前推回代法的潮流计算方法,能够适用于舰船中压直流综合电力推进系统。     

大功率脉冲电能变换器功率模块叠层母排设计与优化研究

通过分析叠层母排设计的基本原理,对大功率脉冲电能变换器功率模块叠层母排的设计要点进行了研究。论文依据母排结构对杂散电感的影响,明确了叠层母排设计和优化的原则,并运用到大功率脉冲电能变换器的叠层母排设计中。最后通过软件仿真分析,验证了母排设计原则的可行性及大功率脉冲电能变换器叠层母排设计的合理性。     

船舶电网谐波分析

本文介绍了电力推进船舶谐波,阐明了谐波产生的原因和谐波的危害,分析总结了抑制船舶谐波的方法和措施。     

锌氧化银电池注液激活系统仿真模拟

利用ANSYS Fluent软件对锌氧化银一次电池注液激活系统进行模拟分析,在三种不同特性的点火器匹配注液激活系统条件下,模拟计算各个阀门能否正常开启、开启时间以及开启的顺序。分析计算得出各个阀门开启的时间,能够很好的指导注液系统设计。     

Modeling the interactions between car and bicycle in heterogeneous traffic

In this paper, a new cellular automata model is proposed to simulate the car and bicycle heterogeneous traffic on urban road. To capture the complex interactions between these two types of vehicles, a novel occupancy rule is adopted in the proposed model to consider the variable lateral distances of mixed vehicular traffic. Based on massive simulations, microscopic fundamental diagrams under different bicycle densities are devised. With these, the bicycle's spilling behavior is then investigated and discussed. In order to reflect the interference of a bicycle on a car, the interference transformation from friction state to block state is modeled explicitly. Finally, different simulation results under different occupancy rules indicate that the constant and fixed occupancy rule adopted in the previous studies might lead to overestimation of car flux in the heterogeneous traffic flows with different bicycle densities. Copyright © 2013 John Wiley & Sons, Ltd.     

吉隆坡地铁A标段盾构土舱压力的计算与分析

文章以吉隆坡新捷运工程地下北段A标工程为例,基于Horn的三维楔形体破坏理论,采用极限平衡分析法,推导出了在土压及全水头压力作用下满舱土、半舱土、无土三种状态下土舱压力的计算方法,并采用整体分析与局部分析相结合的方法进行了验证。从计算结果可以看出,影响土舱压力的因素主要有水位高度、覆土厚度、粘聚力、覆土及掌子面处的内摩擦角,并对这五个因素进行了敏感性分析。通过运用该方法计算的土舱压力进行掘进并对现场监控量测数据进行分析,地表沉降均满足相关设计要求。