Effect of Explosion in a Gas Pipeline Compartment of a Utility Tunnel on Neighboring Metro Tunnels北大核心CSCD

In this paper the numerical simulation analysis of the effect of explosion in the gas pipeline compartment of a utility tunnel on neighboring metro tunnels was conducted using the software AUTODYN. The results show that the TNT equivalent in a fireproof partition with length of 200 m is 41.6 kg when the gas concentration in the gas pipeline compartment reaches 10%; the blast wave has much effect on the crown and arch waist of the round metro tunnel and it’s necessary to take some protective measures in both areas; when the surrounding soil is sand, the utili- ty tunnel is above the round metro tunnel and their alignments are in the same direction, the greater the vertical spacing between the utility tunnel and the metro tunnel, the smaller the effect of the blast wave on the metro tunnel; when the vertical spacing is 7.2 m, the maximum dynamic tensile stress is 1.86 MPa (including the static stress value of 1 MPa in the tunnel segment) and it is slightly smaller than the designed tensile strength of metro tunnel (about 1.89 MPa). The maximum vibration velocity and the maximum displacement meet the structural stability require- ments, so it is suggested the vertical spacing between the utility tunnel and metro tunnel shall not be less than 7.2 m. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

A Study of Prevention Techniques for Tunnel Lining Defects北大核心CSCD

Defects of tunnel lining, such as inadequate thickness, voids, cracks, rock falling and water leakage etc., endanger the safety of railway tunnel operation. Based on the site construction, an analysis of the reasons for lining defects was conducted; technical measures against lining defects were proposed and tests were carried out at site. The results show that these measures are reliable and effective, and the purposes of prevention and treatment are re⁃ alized. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

车身壁板自由阻尼层稳健性优化设计

在车身壁板自由阻尼层的优化设计中,提出了考虑阻尼材料参数不确定性波动的稳健性优化设计方法。首先,在车身防火墙、地板和顶棚等区域全敷阻尼材料;其次,以等效辐射声功率(ERP)为优化目标对阻尼层布局进行拓扑优化并验证优化效果;最后,以阻尼层厚度为随机设计变量,损耗因子和弹性模量为随机变量,质量最小为优化目标,并结合径向基函数(RBF)近似模型、蒙特卡洛模拟(MCS)和序列二次规划算法(SQP)对阻尼层进行6σ稳健性优化设计。结果表明,优化后车身自由阻尼层的总质量减少了50.45%,并且车身结构噪声性能达到了6σ质量水平,实现了保证车身轻量化要求下的阻尼层稳健性优化的目标。     

On Safety in Dismantling Temporary Strut of Super-large Tunnels with Double-layer Primary Support北大核心CSCD

More and more multiple-track tunnels and super-large section tunnels have been built, and disman- tling of temporary strut is a weak point of the whole structure during force transfer when the secondary lining is con- structed. It is significant to guarantee structure safety during dismantling of temporary strut. Little systematic re- search on safety in dismantling of temporary strut of the super-large section tunnel with double-layer primary support has been conducted, so the internal force and security of the two-layer primary support of the Xinkaotang tunnel were analyzed by a numerical analysis and site measurement, and it proves the effect of two-layer primary support on the safety during strut dismantling. The research results indicate that: (1) with constant support thickness and one-time longitudinal dismantling length, the safety factor of secondary primary support is larger than that of the first primary support, and the safety factor of the first primary support is larger than that of the single-layer primary support. Change range of safety factor for the first primary support is smaller than that of the single-layer primary support, and the safe factor for the single-layer primary support is smaller than that of the secondary primary support; (2) with the same support pattern, the safety factors increase firstly and then decrease with an increase of the onetime dismantling length. The calculated results of various cases show that the reasonable one-time dismantling length for this project is about 9 m. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

基于有限元法的某商用车驾驶室力学性能仿真研究

文章基于有限元法,采用Nastran软件,对某商用车驾驶室系统进行了CAE模态,弯曲扭转刚度和强度分析,结果显示,驾驶室前四阶模态有效避开了发动机怠速频率,而弯曲和扭转刚度满足设计目标,同时,驾驶室四工况下最大塑性应变达成设计目标,综合评估该商用车驾驶室力学性能符合设计要求.     

汽车理论非标准答案教学改革的研究

文章针对车辆工程专业核心课程—汽车理论,结合我校该专业的定位和社会对该专业人才的实际需求,根据地方院校应用型人才培养的目标和要求,在我校进行了汽车理论课程非标准答案教学改革的探索,提出了该课程采用非标准答案教学的改革思路,并从非标准答案教学的意义、非标准答案教学改革的内容与形式、具体实施步骤以及评分标准等方面进行了细致...     

基于Richards-BP模型的地表沉降特征预测模型研究

地下开采引起的地表沉降大致呈S形发展,最终趋于稳定状态,这能够运用生长曲线Richards函数进行预测分析。同时,又因为测量和外界存在不确定性和随机性,使得地表沉降也具有动态的特征。针对地下岩矿开采矿区地表沉降曲线与Richards预测模型曲线的相似性,分析了Richards模型在地表沉降预测中的适用性,提出通过Richards生长曲线模型预测矿区地表沉降的趋势性变形部分,利用BP神经网络模型降低地表沉降的随机性影响部分,提高模型预测效果。计算结果证明了其在地表沉降预测中的适用性和可行性。     

A data model applied to the knowledge-based ICAS

Image-guided computer aided surgery system (ICAS) contributes to safeness and success of surgery operations by means of displaying anatomical structures and showing correlative information to surgeons in the process of operation. Based on analysis of requirements for ICAS, a new concept of clinical knowledge-based ICAS was proposed. Designing a reasonable data structure model is essential for realizing this new concept. The traditional data structure is limited in expressing and reusing the clinical knowledge such as locating an anatomical object, topological relations of anatomical objects and correlative clinical attributes. A data structure model called mixed adjacency lists by octree-path-chain (MALOC) was outlined, which can combine patient's images with clinical knowledge, as well as efficiently locate the instrument and search the objects' information. The efficiency of data structures was analyzed and experimental results were given in comparison to other traditional data structures. The result of the nasal surgery experiment proves that MALOC is a proper model for clinical knowledge-based ICAS that has advantages in not only locating the operative instrument precisely but also proving surgeons with real-time operation-correlative information. It is shown that the clinical knowledge-based ICAS with MALOC model has advantages in terms of safety and success of surgical operations, and help in accurately locating the operative instrument and providing operation-correlative knowledge and information to surgeons in the process of operations.     

基于小波变换与支持向量机的舰船水压信号检测方法

采用小波变换与支持向量机相结合对舰船水压场信号建立检测模型.该方法通过对海浪信号进行小波分解并对某一特定低频频段信号重构,利用支持向量机对重构信号建立预测模型,预测误差值作为特征值对舰船水压信号进行检测.通过检测验算表明此方法的有效性,特别是在低信噪比情况下,仍能较好地检测到目标信号.     

基于Mindlin位移解的超大群桩基础沉降计算

针对18根和64根超长大直径群桩基础,采用Mindlin位移解,假定桩端阻力为集中力和桩侧摩擦阻力呈向下线性增加分布形式后,推导出沉降计算公式.在苏通长江公路大桥主桥索塔群桩基础离心试验的模型地基条件下,按照变形比法来确定压缩土层的计算深度,对这两类超长大直径群桩进行沉降量计算.研究结果表明,与离心模型试验沉降值相比,两类群桩理论计算沉降值均偏低,18根群桩基础沉降理论计算值偏低16.8%,而64根群桩基础偏低39.9%.可见,用基于Mindlin位移解对超长大直径群桩基础进行沉降计算时,理论值偏低,同时也表明群桩效应对桩数较多的群桩沉降计算影响较大.