AN EXPERIMENTAL STUDY ON REMOVAL OF NOx IN FLUE GAS AT THENONEQUILIBRIUM PLASMA

Removal of nitrogen oxides (NOx) in flue gas by means of nonequilibrium plasma technology is a very prospect and attractive method. As the nonequilibrium plasma micro discharges can generate a powerful energy flux, imparted to the flue gas, the molecules and atoms of pollutants are motivated and decomposed, and then NOx in the flue gas are decomposed and conversed in the particular conditions. Based on nonequilibrium plasma in combination with catalytic principle, an experimental investigation on NOx decomposition and conversion with AI2 03 catalysts was carriedout and the NOx removal rate up to 95% was obtained. The NOx decomposition and conversion principle with AI2O3 catalysts was also discussed.     

钢管混凝土箱型拱桥空间结构分析研究

以某主跨为152 m的钢管混凝土箱形拱桥为例,用有限元方法建立其空间计算模型,分析矢跨比等设计参数对拱圈截面内力的影响,并在考虑混凝土收缩徐变的情况下,分析各控制截面内力和位移随时间的变化关系.表明:拱桥矢跨比对其轴力和弯矩影响较大;随着时间的推移,拱桥结构内力和位移有很大改变.     

海城南枢纽立交扩建设计

随着高速公路逐年增长,使得高速公路与高速公路相交的枢纽立交扩建也越来越多.对海城南枢纽立交扩建设计进行了详细介绍.     

特大城市多层次轨道交通网络整合问题思考

未来10年,中国特大城市将大规模建设市域快速轨道交通系统。这为在整个市域范围内改善铁路、中心城轨道交通、市域快速轨道交通及其结合关系提供了良好契机。总结轨道交通网络之间的三种结合类型:点状结合、线状结合、网状结合,并分析不同结合类型的服务效果差异。提出轨道交通网络整合的概念,论述轨道交通网络整合的必要性和可行性。重点阐述轨道交通网络整合的主要技术措施。最后,指出中国市域快速轨道交通规划中需要注意的主要问题。     

抑制心内直视术中核转录因子激活保护心肌

目的在人类体外循环(CPB)心内直视手术中研究核转录因子-kB(NF-kB)的激活与心肌白细胞浸润及损伤的关系,并观察氧自由基清除剂辅酶Q10对NF-kB激活的抑制作用及其对心肌的保护作用。方法选取47例接受CPB心内直视手术的成年患者,随机分为对照组30例,治疗组17例。治疗组手术前5 d口服辅酶Q10片剂。在体外循环转机前、心脏缺血45 min和再灌注45 min时取右心房肌组织,做心肌组织病理学、超微结构及NF-kB活性观察。术后观察血流动力学指标、血管活性药物剂量和临床指标。结果在缺血45 min及再灌注45 min后,对照组心肌毛细血管腔内可见嗜中性白细胞聚集并黏附于内皮细胞,超微结构损害,细胞胞核和胞浆内均可见NF-kB阳性表达;而治疗组心肌可见少数嗜中性细胞浸润,超微结构损害轻微,细胞胞核和胞浆内有微弱的NF-kB阳性表达。术后两组血流动力学指标、血管活性药物剂量和临床指标间无显著差异。结论NF-kB在心内直视术中的心肌缺血和再灌注病理过程中起重要作用,辅酶Q10对NF-kB激活有明显抑制作用,并对心肌有保护作用。     

生存素和CD44V6蛋白在胃癌中的表达及其相关性

目的探讨生存素（survivin）和CD44v6蛋白在胃癌中的表达及意义。方珐应用免疫组化技术检测120例胃癌（GC）、30例异型增生（GED）和20例正常胃黏膜组织（NGM）中survivin和CD44v6蛋白表达，并结合肿瘤的病理学行为和临床随访资料进行分析。结杲在胃癌组织中，survivin和CD44v6阳性率分别为75．8％和81．7％，均显著高于GED和NGM（P〈O．05）；survivin和CD44v6表达与GC浆膜浸润、淋巴结转移和患者预后密切相关（P〈0．05）。结论Survivin和CD44v6表达与GC发生、转移和患者生存期有关，检测survivin和CD44v6蛋白表达可作为预测胃癌患者预后的参考指标。     

沥青混凝土与连续配筋混凝土复合式路面承载力分析

为了防止公路的早期破坏, 为长寿命路面结构研究提供理论依据与技术支持, 应用有限元方法对沥青混凝土与连续配筋混凝土复合式路面进行了温度场与疲劳应力分析。分析结果表明: 小于4cm的沥青混凝土面层主要用于改善路面使用性能; 大于4cm的沥青混凝土面层可以有效改善路面的温度场, 每增加2cm, 可满足15%~20%的超载要求。可见该复合式路面能够承受重载和一定程度的超载而不发生疲劳破坏。     

A Solution Processable Flexible Transparent Conductive Graphene/PEDOT: PSS Film Fabricated by Spin and Blade Coating

Flexible transparent conductive films were made on PET substrates by spin and blade coating, using graphene sheets dispersed in PEDOT: PSS solution. Ultrasonic substrate vibration was used to improve microstructure and properties of the films. Comparing to the pristine PEDOT: PSS film, the sheet resistance is 3 to 4 orders of magnitude lower with the addition of graphene. The conductivity and reproducibility of the film are improved for two-layer films comparing to one-layer films, with a reduction in transparency. Films prepared with substrate vibration showed lower sheet resistance for one-layer films, as the size of dewetting areas is reduced. In addition, large-area flexible films with desirable conductivity and transmittance were successfully fabricated by blade coating, which is promising, as the process is low-cost, scalable and compatible with roll-to-roll manufacturing.     

Vertical bearing behavior of cast-in-place diaphragm wall in Shanghai

When diaphragm wall is used as the permanent vertical bearing structure,design standard of the bored pile adopted has to induce the risk or iste. The vertical load transfer mechanism and bearing capacity of the diaphragm wall are examined by a field testing program at the site in Shanghai soft clays. Test results indicate that the diaphragm wall almost behaves as a rigid body under the vertical load. It induces that the skin friction and the toe resistance of the wall develop simultaneously. The skin fricti...     

闭口肋正交异性钢桥面板应力分析

正交异性钢桥面板在车辆荷载作用下将产生极大的面外弯矩,由于桥面板与纵肋的相对厚度较小,这种面外弯矩将导致较高的弯曲应力进而使构件产生裂纹。用大型有限元分析软件ANSYS对正交异性钢桥面板在板．肋连接处的应力状况进行了数值计算。计算结果表明桥面板应力一般大于纵肋应力,可在横截面加设内横隔板以改善结构受力,同时帽孔尺寸不宜过大,设为25mm较为合适。