连续刚构桥悬臂施工阶段的预应力剪力滞效应分析

根据某三跨连续刚构桥的悬臂施工过程,分析了悬臂施工节段预应力荷载产生的箱梁剪力滞效应以及关键截面剪力滞效应的变化规律。结果表明,在悬臂施工过程中,悬臂预应力束会对箱梁产生正负剪力滞效应,且负剪力滞效应较大。     

监理在农村公路建设中的作用

沥青路面平整度受底基层、基层表面施工的直接影响，严格控制基层、底基层平整度，严格控制面层施工，消除各种因素（如设备匹配、摊铺、碾压及施工温度等）对面层平整度的影响，来确保沥青路面平整度。     

沥青混凝土路面裂缝产生原因及防治措施

系统地阐述了沥青混凝土路面裂缝的类型、表现形式和产生原因,并就如何减少沥青路面裂缝提出了防治措施.     

Mirror Mapping of Laser Interferometer Measurement System on Ultra-precise Movement Stage

The accuracy and repeatability of the laser interferometer measurement system （LIMS） are often limited by the mirror surface error that comes from the mirror surface shape and distortion. This paper describes a new method to calibrate mirror map on ultraprecise movement stage （UPMS） with nanopositioning and to make a real-time compensation for the mirror surface error by using mirror map data tables with the software algorithm. Based on the mirror map test model, the factors affecting mirror map are analyzed through geometric method on the UPMS with six digrees of freedom. Dam processing methods including spline interpolation and spline offsets are used to process the raw sampling data to build mirror map tables. The linear interpolation as compensation method to make a real-time correction on the stage mirror unflatness is adopted and the correction formulas are illuminated. In this way, the measurement accuracy of the system is obviously improved from 40 nm to 5 nm.     

“上海2040”绿色交通发展愿景和路径选择

绿色发展是"上海2040"的规划理念之一,是上海市交通发展的核心价值导向。围绕建设卓越的全球城市的目标愿景,提出面向创新、人文、生态三个维度的绿色交通策略和指标,确立能源和资源双重约束下的绿色交通发展内涵。基于交通与城市空间协调布局、协同功能的规划思路,指出打造轨道都市、构建TOD社区、引导绿色出行是实现上海市绿色交通发展的主要路径及策略。提出重构多层次、多模式的轨道交通网络、推行街区制的全路网规划设计思路、实施交通策略分区、提升步行和自行车交通网络功能、加强智慧交通发展等多重措施。     

带型城市空间形态界定及其干线道路特征

特殊的空间形态、稀缺的贯通性轴向道路资源以及高度混合的内外交通导致带型城市面临独特的交通问题。从城市空间形态角度出发,采用聚类分析法分析中国657个设市城市,据此界定带型城市为建成区长宽比大于3的城市。并对带型城市(组团)的交通需求、路网布局、道路级配进行梳理,发现带型城市贯穿性长轴干线道路的数量、等级、分布对带型城市规模、形态以及交通组织具有重要作用,是带型城市路网规划的核心。最后,提出带型城市常用的三轴干线路网布局模式及相应的道路等级,可作为带型城市路网规划的参考依据。     

Calculation of strain amplification matrix for strain invariant failure theory based on representative volume element models with periodical boundary condition

Strain invariant failure theory (SIFT) is a micro-mechanics-based failure theory for multi-scale failure analysis of composite materials originally proposed by Gosse and Christensen. In this paper, the approach for obtaining strain amplification matrix which is a key step for the execution of SIFT is improved by adopting representative volume element (RVE) finite element models considering periodical boundary condition, based on which more actual deformation mode is reflected. The deformation modes and strain data at the characteristic points of the centroid cell of multi-cell RVE model are analyzed and taken as a reference. It can be concluded that more reasonable deformation mode and relationship between the micro-mechanical and macro-mechanical strain states are obtained by employing the new model. Finally, numerical examples are provided to illustrate the determination of strain amplification factors within the RVEs considering periodical boundary condition at the characteristic points.     

Application of digital image correlation method to in-situ dynamic strain measurement

Application of digital image correlation (DIC) method to determination of in-situ dynamic strain is presented in this study. Firstly, an integrative software is programmed based on the DIC algorithms and point-wise least-squares fitting technique. Then, simulated speckle images are generated to study the computational accuracy of this software. The experimental setup and procedures for measuring in-situ dynamic strain through both DIC and strain gauge are proposed. The DIC results are close to those measured by strain gauge. This fact reveals that DIC is a practical and effective tool for in-situ dynamic strain measurement. Finally, the full-field in-situ dynamic strain of another specimen is measured by DIC, and the overall distribution of the strain in the measurement area is clearly shown.     

CT reconstruction with priori MRI images through multi-group datasets expansion

Computed tomography (CT) reconstruction with a well-registered priori magnetic resonance imaging (MRI) image can improve reconstruction results with low-dose CT, because well-registered CT and MRI images have similar structures. However, in clinical settings, the CT image of patients does not always match the priori MRI image because of breathing and movement of patients during CT scanning. To improve the image quality in this case, multi-group datasets expansion is proposed in this paper. In our method, multi-group CT-MRI datasets are formed by expanding CT-MRI datasets. These expanded datasets can also be used by most existing CT-MRI algorithms and improve the reconstructed image quality when the CT image of a patient is not registered with the priori MRI image. In the experiments, we evaluate the performance of the algorithm by using multi-group CT-MRI datasets in several unregistered situations. Experiments show that when the CT and priori MRI images are not registered, the reconstruction results of using multi-group dataset expansion are better than those obtained without using the expansion.     

集装箱船舶装箱排序问题的两阶段算法

集装箱船舶装箱排序问题综合集装箱装船顺序与船舶贝内排箱,是一类典型的组合优化问题.考虑堆场发箱顺序和船舶配载之间的关联,构建集装箱船舶装箱排序问题的数学模型.针对构建的优化模型,鉴于已有方法难以直接对其进行求解,基于两阶段分层求解思想设计SWO-HES两阶段算法.算法第1阶段利用吱呀轮算法(SWO)大邻域导向式搜索的特点优化集装箱装船顺序问题;第2阶段将SWO的结果作为输入,基于启发式规则和演化策略算法(ES)构造混合演化策略算法(HES)优化船舶贝内排箱问题.最后,通过不同规模算例的研究,将SWO-HES与常见智能算法、基于实际装船规则的启发式算法进行对比分析,验证模型与算法的有效性.