城市占道施工交通影响分析与对策研究

城市建设项目占道施工对交通影响很大,严重影响居民出行。该文分析和研究占道施工对路网交通的影响,制定相应交通对策,采取科学合理的交通组织方案,对提高城市管理水平、缓解占道施工对路网交通的压力意义重大。     

基于土地利用的开发区交通需求预测模型研究及应用

该文提出了基于土地利用的开发区交通需求预测模型,并将其应用于实际规划工作。首先提出了基于土地利用的交通需求预测的体系框架,建立基于土地利用的居民出行生成预测模型,确定了用于出行分布预测的重力模型以及用于出行方式分担预测的距离竞争曲线模型,在此基础上,将所建立的模型应用于营口沿海产业基地的综合交通规划中,参考国内相关城市案例数据及营口老城区居民出行调查数据标定了上述模型中的参数,研究表明预测模型在开发区的交通规划中具有良好的应用效果。     

我国高温-高含冰量冻土力学特性研究现状

阐明了高温-高含冰量冻土力学特性研究的重大理论和现实意义,归纳总结了高温-高含冰量冻土力学特性研究的现状。     

岩体温度法隧道施工掌子面前方含水体预报模型试验研究

文章从岩体温度影响因素及岩体温度场出发,详细介绍了室内模型的制作、实验应注意的问题、试验成果及分析计算,初步探讨了岩体温度与隧道施工掌子面前方含水体的关系及隧道施工掌子面前方含水体的预报原理和可行性.     

动态风险管理在上海轨道交通4号线修复工程中的应用

介绍了动态风险管理的形成及相应的管理内容和框架。结合上海轨道交通4号线修复工程中的超深基坑工程,通过将风险管理与项目管理相结合,制订了动态风险管理的措施,并将其应用于工程实践之中：修复工程的顺利竣工,证明了动态风险管理确实能够起到有效地控制工程风险的作用。     

Mechanical properties of asphalt pavement structure in highway tunnel

A linear full 3D finite element method （FEM） was performed in order to present the key design parameters of highway tunnel asphalt pavement under double-wheel load on rectangular loaded area considering horizontal contact stress induced by the acceleration/deceleration of vehicles. The key design parameters are the maximum horizontal tensile stresses at the surface of the asphalt layer, the maximum horizontal tensile stresses at the bottom of the asphalt layer and the maximum vertical shear stresses at the surface of the asphalt layer were calculated. The influencing factors such as double-wheel weight; asphalt layer thickness; base course stiffness modulus and thickness; and the contact conditions among the structure layers on these key design parameters were also examined separately to propose construction procedures of highway tunnel asphalt pavement.     

边坡防护室内水力冲刷模拟试验及降雨入渗分析

阐述了边坡防护室内水力冲刷模拟试验的目的、方法和步骤.针对不同边坡防护型式、不同坡率、不同土质状况的五种试件进行了降雨入渗试验,对结果进行了分析,并总结出不同工况下的降雨入渗规律.     

A robust non-Hertzian contact method for wheel–rail normal contact analysis

A modified Kik–Piotrowski (MKP) model is proposed in this paper for an accurate and robust calculation of wheel–rail normal contact problem. The presented method is able to consider the relationship between the elastic deformation of a line and the normal pressure distribution within the contact patch. A novel shape correction method is put forward to correctly describe the elastic deformation of the contact patch. Taking the results estimated by Kalker’s variational method and Kik–Piotrowski method as references, the proposed method is validated by three contact cases, including the assumed standardised non-Hertzian contact and the two-point contact, as well as the contact behaviours based on three actual wheel–rail profiles. The simulation results indicate that, compared with Kik–Piotrowski method, the proposed MKP method achieves better agreement with Kalker’s variational method. Moreover, the MKP method can avoid the abrupt change of wheel–rail normal force due to the sudden transfer of the contact point, which contributes to a better computational stability.     

Tire wear estimation based on nonlinear lateral dynamic of multi-axle steering vehicle

This paper presents a novel nonlinear dynamic model of a multi-axle steering vehicle to estimate the lateral wear amount of tires. Firstly, a 3DOF nonlinear vehicle dynamic model is developed, including dynamic models of the hydropneumatic suspension, tire, steering system and toe angle. The tire lateral wear model is then built and integrated into the developed vehicle model. Based on the comparison of experimental and simulation results, the nonlinear model is proved to be better than a linear model for the tire wear calculation. In addition, the effects of different initial toe angles on tire wear are analyzed. As simulation results shown, the impact of the dynamic toe angle on the tire wear is significant. The tire wear amount will be much larger than that caused by normal wear if the initial toe angle increases to 1° - 1.5°. The results also suggest that the proposed nonlinear model is of great importance in the design and optimazation of vehicle parameters in order to reduce the tire wear.     

防抱死制动系统对SUV车辆操控稳定性仿真分析

针对SUV车辆在制动情况下出现的操纵性和稳定性变差现象,在CarSim软件中建立了SUV车辆动力学模型,在对开的路面对行驶的紧急制动工况进行了仿真,初步发现防抱死系统对该工况下车辆操纵稳定性的影响最大,为进一步验证,与Simulink结合建立了整车联合仿真模型,将Carsim中SUV制动过程中的制动压力导出至Simulink模型作制动仿真测试,进一步描绘出车轮侧偏角、横移角速度和偏移位移等影响操纵稳定性的参数数值变化曲线,通过分析对比,确定了紧急制动条件下为SUV车辆加装防抱死系统能达到提高操纵稳定性的目标,最终达到安全驾驶的目的。