Phase change analysis of an underwater glider propelled by the ocean＇s thermal energy

The phase change characteristic of the power source of an underwater glider propelled by the ocean＇s thermal energy is the key factor in glider attitude control. A numerical model has been established based on the enthalpy method to analyze the phase change heat transfer process under convective boundary conditions. Phase change is not an isothermal process, but one that occurs at a range of temperature. The total melting time of the material is very sensitive to the surrounding temperature. When the temperature of the surroundings decreases 8 degrees, the total melting time increases 1.8 times. But variations in surrounding temperature have little effect on the initial temperature of phase change, and the slope of the temperature time history curve remains the same. However, the temperature at which phase change is completed decreases significantly. Our research shows that the phase change process is also affected by container size, boundary conditions, and the power source＇s cross sectional area. Materials stored in 3 cylindrical containers with a diameter of 38ram needed the shortest phase change time. Our conclusions should be helpful in effective design of underwater glider power systems.     

基于GPRS的机车信号远程实时监控系统

针对目前铁路机车信号系统监测存在实时性差的缺点，提出了一种基于GPRS无线网络的监测方法。以Atmel公司AT91R40008ARM处理器为核心，配以GR47GPRS模块，设计了GPRS数据发送盒，以实现机车信号信息的实时检测和无线传输。     

The ISM Code and the ISPS Code: A critical legal analysis of two SOLAS regimes

Within the comprehensive body of law encompassed by the International Convention on Safety of Life at Sea, 1974 (SOLAS), there are two regimes that are topical and outstanding in the current maritime milieu. These are the international safety management and the international ship and port facility regimes, both characterized by two codes serving as the centre of gravity of each, namely, the ISM Code and the ISPS Code, respectively. In this article the concept of the code as a legal instrument is perused following which a critical legal analysis is carried out of the two above-mentioned Codes, including their backgrounds, the evolutionary process culminating into the regimes and their interrelationships. Several anomalies and inadequacies in the two regimes are identified but in the final analysis it is concluded that both instruments are salutary additions to the body of convention law generated by the International Maritime Organization (IMO). They will undoubtedly influence the continuing development of international law in the field of maritime safety and security.     

Investigations of vehicle securing without lashings for Ro-Ro ships

To reduce the area on deck occupied by each car and the labour and time required for lashing and unlashing cars, it has been proposed by the author that in some conditions, cars on decks could be transported without lashing. To evaluate cargo securing based on this “lashing-free” concept, computational code was developed to calculate the vehicle–deck interactions for various ship motions. The code was structured by incorporating a vehicle model into a piece of ship motion calculation code. A series of time-domain simulations were conducted to evaluate vehicle securing. It was found that for a target ship consisting of a 6000-unit Ro-Ro vessel, vehicle securing is mainly influenced by the ship's rolling motions and is highly dependent on the wave height and loading conditions. It was suggested from the analysis that vehicles could be secured without being lashed in a large area of the ship in specific weather conditions and on some routes with less adverse sea states. However, it is still suggested that conventional lashing holes should be constructed on the deck because in severe sea states the cars will still need to be lashed. The limitations of the current investigations are also presented. The relevant research work was carried out at the Division of Ship Design and Engineering, Department of Shipping and Marine Technology, Chalmers University of Technology.     

高速列车摩擦制动模拟试验研究

根据相似准则在MM 10 0 0型摩擦磨损试验机上进行高速列车摩擦制动模拟试验 ,研究了SiC颗粒增强铝基复合材料和铜基粉末冶金闸片配对时的制动摩擦性能 ,探讨使用铝基复合材料制动盘的可能性。模拟试验结果表明 :铝基复合材料制动盘和铜基粉末冶金闸片配副进行摩擦制动时具有制动温升低 ,摩擦因数稳定和耐磨性好的优点 ,能满足高速列车的制动性能要求     

大跨度钢管混凝土提篮拱安装施工技术

以无锡市华清路新建下甸桥工程为例,重点介绍该桥采用50 t缆索吊机分5段扣挂法安装单根空钢管拱肋,然后采用可调内撑杆技术对平行拱侧转形成提篮拱,为大跨度钢管混凝土提篮拱的安装提供了新的方法。     

The place of the ISPS Code in the legal international regime

The adoption of the International Ship and Port Facility Security Code (ISPS Code) is the latest response of the international shipping community to the increasing threat posed by acts of terrorism at sea. The ACHILLE LAURO incident of 1985 showed that the traditional law against piracy was not adequate to deal with new types of unlawful acts against international shipping, especially those involving acts of terrorism. The 1988 Convention for the Suppression of Unlawful Acts against the Safety of Maritime Navigation (SUA Convention) and the technical and administrative measures adopted by the Maritime Safety Committee of IMO in 1986 and 1996 attempted to develop a broader regime to deal with unlawful acts against international shipping.However, the events of September 11, 2001 showed that additional measures were still needed to prevent terrorist attacks against ships.     

From privilege to peril

This article addresses the growing concern over the diminishing legal rights and increasing responsibilities of those in command of ships today. A number of high-profile maritime accidents have focussed on the dilemma faced by shipmasters who appear to be held responsible for actions over which they have little or no control. This seems to indicate that the traditional privilege and honour associated with command appears to have become a risky burden. The article discusses the legal rights and responsibilities that shipmasters have today in terms of international maritime law and policy. Four case studies are utilized to illustrate the problem.     

Fault Diagnosing System of Steam Generator for Nuclear Power Plant Based on Fuzzy Neural Networks

All kinds of reasons are analysed in theory and a fault repository combined with local expert experiences is establishedaccording to the structure and the operation characteristic of steam generator in this paper. At the same time, Kohonen algo-rithm is used for fault diagnoses system based on fuzzy neural networks. Fuzzy arithmetic is inducted into neural networks tosolve uncertain diagnosis induced by uncertain knowledge. According to its self-association in the course of default diagnosis. thesystem is provided with non-supervise, self-organizing, self-learning, and has strong cluster ability and fast cluster velocity.     

3-D computational method of wave loads on turret moored FPSO tankers

A three-dimensional method of calculating wave loads of turret moored FPSO (Floating Production Storage and Offloading) tankers is presented. The linearized restoring forces acting on the ship hull by the mooring system are calculated according to the catenary theory, which are expressed as the function of linear stiffness coefficients and the displacements of the upper ends of mooring chains. The hydrodynamic coefficients of the ship are calculated by the three-dimensional potential flow theory of the linear hydrodynamic problem for ships with a low forward speed. The equations of ship motions are established with the effect of the restoring forces from the mooring system included as linear stiffness coefficients. The equations of motions are solved in frequency domain, and the responses of wave-induced motions and loads on the ship can be obtained. A computer program based on this method has been developed, and some calculation examples are illustrated. Analysis results show that the method can give satisfying prediction of wave loads.