Experimental study on frictional and sealing performances of packing rings in an oil-free gas compressor

To enhance the reliability and to extend service life of packing rings, tribological and sealing performances are investigated based on the experimental results. Friction force, leakage rate and power consumption of three materials of pressure packing seals are measured in a refitted vertical gas compressor. The rings are made of common filled polytetrafluroethylene (Filled PTFE), PTFE reinforced with 30% mass fraction carbon fiber (30%CF+PTFE), and carbon-carbon composites infiltrated with PTFE (C/C+PTFE), respectively. It is found that packing rings will periodically vibrate with the periodic vibration of pressure packing after the travel direction of motion abruptly turns to the reverse direction. Furthermore, the amplitude of vibration slows down with the increasing crank angle. Approximate value of friction force is available by multiple-point fast Fourier transformation (FFT) employed to process the experimental results by reducing the impact of vibration to a great extent. Of three materials of rings employed in experiments, Filled PTFE presents minimal leakage rate accompanied with maximum power consumption. And 30%CF+PTFE exhibits minimum friction power and moderate leakage rate. As for C/C+PTFE, its high mechanical and thermal properties are favorable factors to enhance the ability of operating under high pressure and velocity and to improve the wear resistance. Unfortunately, this also leads to a large leakage rate. Comprehensive consideration should be taken into to evaluate the availability, reliability and service life for a type of packing ring under dry running conditions.     

加强我军空中战略投送能力建设研究

针对我军空中战略投送能力薄弱的问题,结合我国国情、军情,研究提出了建立健全快速动员机制、增强民用运输机的军事适用性、发展军用运输机和创新战略投送模式等建议,可为我军空中战略投送能力建设提供参考。     

浅谈城市沥青道路路面维修的施工体会

城市道路路段软土路基较多,经过多年的运营沉降,部分路段出现病害。该文对路面出现的龟裂、坑洞、唧泥、车辙、开裂等病害进行了分析,并提出处理办法,同时提出了病害处治后沥青混凝土路面的加铺方案。     

稀燃增压CNG发动机起动及怠速控制试验研究

根据稀燃增压点燃电控调压式CNG发动机的特点,设计了起动及怠速控制策略,对目标怠速、节气门开度、废气旁通阀开度、燃气供给压差、点火提前角、点火能量、空燃比等参数进行控制。在6缸直列单一CNG发动机上进行了起动及怠速调速试验。试验结果表明:通过优化起动燃气供给量、初始节气门开度、起动点火提前角等参数,可以实现CNG发动机快速、可靠起动;通过标定怠速节气门调速和点火提前角调速控制参数,实现了怠速工况稳定运行。     

Application of large eddy simulation in the performance study of wave blocker

The configuration and aerodynamic performance of the inlet system are important aspects in the process of installing a gas turbine on a naval vessel. Under the requirements, large eddy simulation （LES） is used to simulate the three-dimensional fluid flow in the wave blocker of a marine inlet filter. The Smagorinsky-Lilly sub-grid model was used to model motions of small-scale structures. During numerical simulation, the SIMPLE algorithm was applied. The central-differencing spatial discretization scheme and the second order accuracy finite difference for the temporal discretization were used. Simulation gives satisfactory distribution of the vorticity fields and turbulent kinetic energy. Compared with the k-ε turbulent model, the results of LES are better for the distribution of parameters. The results of experimental study in a small-scale wind tunnel indicate that numerical calculation has higher accuracy. Therefore, the methods used are worthy of reference and introduction for the design of an inlet system.     

The measure and decision of technical risk in the development of naval vessels

The risks in development of navy vessels were explored, The resources of technical risk in the design and development of vessels were mentioned, It was pointed that technical risk dominated the other risk components. Based on the writers＇ understanding and experience from risk analysis and risk ,nanagement to the development of a navy vessel, four measure indexes of technical risk were presented. The decision criteria and the rules corresponding to the indexes were estahlished by the statistic information,     

Study of the helicopter blade running elevation measurement system

Helicopter blade running elevation measurement is an important measure target in helicopter blade dynamic balance experimentation. The elevation influences the helicopter＇ s security and other performance capabilities. In testing, however, it has been difficult to measure the elevation when the rotor reaches high speeds. To get a simple, fast and highly accurate measurement system, photo electricity technology was applied to measuring the blade running elevation. Discussed is the measurement principle of blade running elevation, tire design of the measurement system and analysis of the measurement precision.     

Sensitivity analysis and dynamic modification of modal parameter in mechanical transmission system

Sensitivity analysis is one of the effective methods in the dynamic modification. The sensitivity of the modal parameters such as the natural frequencies and mode shapes in undamped free vibration of mechanical transmission system is analyzed in this paper. In particular,the sensitivities of the modal parameters to physical parameters of shaft system such as the inertia and stiffness are given. A calculation formula for dynamic modification is presented based on the analysis of modal parameter. With a mechanical transmission system as an example, the sensitivities of natural frequencies and modes shape are calculated and analyzed. Furthermore, the dynamic modification is also carried out and a good result is obtained.     

Market based framework for multiple AUVs cooperation

A“Market” based framework for multiple AUVs team is introduced in this paper. It is a distributed meta-level task allocation framwork. The formulation and the basic concepts of the “Market” such as “goods” and “price” are discussed first, then the basic algorithm of the “auction”. The loosely coupled v-MDTSP tasks are considered as an example of the task allocation mission. A multiple AUV team controller and a detailed algorithm are developed for such applications. The simulation results show that the controller has the advantages such as robustness and low complexity and it can achieve better optimization results than the classical central controller （ such as GA） in some tasks. And the comparison of two different local solvers also implies that we should get the reasonable task allocation even not using the high quality algorithm, which can considerably decrease the cooperation computation.     

知识工程技术在摩托车总体设计中的研究与应用

构建基于知识工程(KBE)的摩托车总体设计的结构框架,研究系统的工作流程、定义各应用子系统的功能,在此基础上开发基于KBE的摩托车总体设计系统。为总体设计阶段预测摩托车的动态特性、实现整车的动态性能匹配提供支持。