基于氯离子分布的氯离子渗透参数计算的新方法

根据混凝土中氯离子的分布对氯离子侵入性能进行评价时,混凝土粉末样品的采集,氯离子含量的测试和表达方式,均可对评价结果产生影响。在干湿循环条件下,以理论上的表面氯离子浓度为主要评价参数对氯离子的渗透性能进行评价的方法不尽合理。通过对暴露26年后的青岛北海船厂码头中大量的混凝土芯样中氯离子分布的分析和计算,结合其它文献中氯离子分布的数据,提出了以扩散区与对流区界面为扩散表面,以界面处的氯离子浓度为扩散表面浓度,评价氯离子侵入性能和进行寿命预测的方法。     

Modelling and Control of an Automated Vehicle

We present a vehicle model that includes the vehicle dynamics and a vehicle tire model. The model developed is then used for conducting steering analysis of an automated vehicle. We test the developed model on a step lane change maneuver and propose a model-reference based controller for remote control of a vehicle. Stability analysis of the closed-loop system using die Lyapunov approach is included.     

双层客车用中频电位隔离的电源

德国铁路公司新双层客车从2004年起使用创新的电源.用中频电位隔离的高压逆变器取代至今用16.7 Hz单相变压器的由1 000 V列车母线供电的一般技术.采用这种创新电源可减轻重量并有其他技术优点.     

A capacity related reliability for transportation networks

A capacity related reliability for transportation networks with random link capacity is introduced. It is defined as the probability that the road network can accommodate a certain level of traffic demand, and is built on the concept of network reserve capacity. Network reserve capacity is defined as the largest multiplier applied to an existing origin-destination demand matrix that can be allocated to a transportation network in a user-optimal way without violating the link capacities. Due to large variability associated with link capacities, a probabilistic approach is adopted to model the different physical and operational factors that often degrade the capacity of roadways. A Monte Carlo simulation procedure is developed to estimate the capacity related reliability measure. Numerical results are provided to demonstrate the feasibility of the approach.     

Multimodal traveling and its impact on urban transit network design

Multimodal trip making, that is trips using a combination of several modes between origin and destination, is expected to be beneficial to society and might offer advantages to the traveler as well. This article looks at some of the implications of multi‐modality in trip making for the design of urban transit systems since these play an important role in multi‐modal transportation systems. In this respect, the article looks at the strategic design characteristics of urban transit networks, that is line density, stop density and service frequencies for the case of multimodal access to urban transit networks and for hierarchical network structures in urban transit systems. The analyses show that multimodal access does not require alternative network structures. For hierarchical network structures it is concluded that these are primarily determined by the hierarchy in demand densities and thus by hierarchy in urban structures.     

�����еĶ�ά����ģ�ⷽ��Ӧ������

由于在模拟密集网络、宏观问题和方案阶段中的优势，连续性模拟方法应用到交通模型的模拟中，正在得到越来越多的关注。此论文意在为二维连续模拟方法的发展和应用提供综合的概括。首先讨论的是理论的发展和对特殊的或多变领域机理的模拟，然后再针对连续模拟方法应用到工厂选址、道路选择、人行道的规划、政策和社会经济分析进行评论。最后，预测其未来研究的前景。     

利用试验模态参数建立轮胎非稳态侧偏模型

在对轮胎垂直特性和稳态侧偏特性建模的基础上，利用由轮胎模态试验提取的试验模态参数建立了轮胎非稳态侧偏模型，该模型考虑了印迹的动态变形和胎宽的影响，对印迹进行离散化并初步计入了速度对非稳态性的影响，推导出侧向力和回正力矩关于侧向位移和摆动角的传递函数的解析公式，可以计算不同载荷下的非稳态特性，计算结果与文献中的试验结果相符，建模和计算结果说明利用试验模态参数可以方便地建立轮胎的非稳态特性，计算结果与     

Advanced Control Methods of Active Suspension

This paper describes new control methods for the active suspension. For improving ride comfort further, preview control rule is proposed. For improving stability further, roll stiffness distribution control rule is examined by the test vehicle. Simulations and vehicle driving tests are conducted to confirm the effect of these new control methods. The results of simulations and vehicle driving tests show in our research phase that preview control can achieve a substantial improvement in ride comfort and application of roll stiffness distribution control provides a large improvement in stability     

Analytical extension of the effective axle characteristics concept for the development of a structured chassis design process

The lateral vehicle dynamics is defined by the effects of side forces at the front and rear axle. These forces are caused by the slip and camber angle at the individual tyres, which are results of the kinematics and compliances of the chassis. This paper extends the approach of the effective axle characteristics by Paceyka to the analytical expression of the axle cornering stiffness and the axle relaxation behaviour with the aim of the development of a chassis design process as it applies in the early design stage. The obtained expression is integrated into a single track model and validated against a full nonlinear two-track model. By this means of these analytical expressions for the axle cornering stiffness and the axle relaxation behaviour it is possible to directly calculate and analyse the effective slip angles for linear quasi-static and dynamic driving manoeuvres.     

Adaptive control of the shifting process in automatic transmissions

This paper focuses on the way of keeping shift quality of automatic transmissions consistent in mass production and with mileage accumulation. We investigate the main factors influencing the consistency of shift quality. Test results show that the torque to pressure (T2P) and pressure to current (P2I) characteristics of shifting elements are easily affected. A simulation model of an 8-speed automatic transmission is established to simulate the dynamic process of clutch-to-clutch shift. Simulation results demonstrate that the change of T2P and P2I characteristics has a significant influence on shift quality. In order to compensate for the influences, we develop two adaptive control strategies, i.e., the adaptive control strategies for torque phase and inertia phase. They make use of the measured speed information and time information to evaluate shift quality. Then the control parameters are tuned to adapt to the change of T2P and P2I characteristics. Vehicle tests verify that the developed adaptive control strategies are effective to keep shift quality consistent in mass production and with mileage accumulation.